Panasonic LCD Projector Pt Vw330 Network Operations Manual

							11
Using Web Browser
Accessing from the Web browser
Activate the Web browser in the personal computer.1 
Enter the IP address set by the projector into the URL input field of the Web 2 b r ow s e r.
Enter your “User name” and “Password”.3 
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for 
the use name and panasonic (lowercase letters) for 
the password.
Click [OK] to display the Projector status 4 page.
“Projector status” page is displayed.
Avoid activating two or more Web browser simultaneously to work out setting or control actions.• 
Change the password first of all.• 
Administrator privileges enable the use of all functions. User privileges enable the use of only • 
“Projector status”, “Network status”, “Basic control”, “Advanced control”, and “Change password”.
If you want to control the projector using a Web browser, set [Network control] in the network menu to [On].•  
						

							12
Using Web Browser (continued)
 Description of each item 
1 Page selection tabs
  Click these to switch pages.
2 Monitor information button 
Click this item, and the status of the projector is 
displayed.
3 Projector control button 
Click this item to display the projector control 
page.
4 Detailed set up button 
Click this item to display the advanced settings 
page.
5 Change password button
    Click this button to display the password change 
page.
6  Language switch button
    Click this button to switch language between 
English and Japanese.
5
4
3
2
1
Projector status page
Click [Status], then [Projector status] to display the Status information page.
This page displays the projector statuses established for the items shown below.
1 Displays the type of projector.
2 Displays the firmware version of the projector 
main unit.
3 Displays the power source status.
4 Displays the video mode status.
5 Displays the serial number of the projector.
6 Displays the firmware version of the network.
7 Displays the AV mute status.
8 Displays the volume status.
9  Displays the status of input switch.
10  Displays the intake temperature status of the  
     projector.
11 Displays the exhaust temperature status of the  
     projector.   
12 Displays the optics module temperature status of    
     the projector.
13  Displays the use time of the lamp.
14  Displays the self diagnostics information. 
     (See page 13)
15 Displays the runtime of the projector.
1
2
3
4
5
6
7
8
9
10
11
12
13
15
14
6 
						

							13
Using Web Browser (continued)
Error information page
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click 
the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.• 
 When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR TEMPER ATURE
Intake air temperature is high. It could be because it is used in an environment of high 
temperature such as close to a heating device, etc., the air intake is blocked, or the air 
filter is clogged.
EXHAUST AIR TEMPER ATUREExhaust air temperature is high. Exhaust may be blocked, or high altitude mode may be 
set wrong.
OPTICS MODULE TEMPER ATUREOptics module temperature is high. 
LAMP REMAIN TIMEThe lamp runtime has exceeded the prescribed cumulative time, and it is now time to 
replace the lamp.
LAMP STATUSThe lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
OK:      Normal operation
FAILED:      Occurrence of trouble
WARNING: Abnormal condition
Network status page
Displays the current configuration information of the network.
 Displays the configuration details of wired LAN.
 
						

							14
Using Web Browser (continued)
Basic control page
To move from another page, click [Projector control], then [Basic control].
1 Power standby/on control
2 Use these to select the input signals
3 Volume adjust
4 Switches image mode
5 Operation of AV mute
5
4
3
2
1
Detail control page
Click [Projector control], then [Advanced control] to display the Detail control page.
1  Execute Auto setup function
2 Operations on Screen mode
3  Operations on Keystone function
4  Operations on Rear/Ceiling
5  Operations on Image adjust
1
2
3
4
5 
						

							15
Using Web Browser (continued)
Change Password page
Click [Change password].
1 Administrator
2 User
 Administrator mode
1 Account
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re-enter for confirmation)
7 Button for executing password change
 User account
1 Account
2 New user name input field
3 New password input field
4 New password input field (re-enter for confirmation)
5 Button for executing password change
 User mode
A user can change password only.
1 Current password input field
2 New password input field
3 New password input field (re-enter for confirmation)
4 Button for executing password change
 - When changing the administrator account, both “Current user name” and “Current password” are required.
 - No account is not available .
 - Administrator account and user account should be differed.
2
1
7
6
5
4
3
2
1
5
4
3
2
1
4
3
2
1 
						

							16
Using Web Browser (continued)
Network config page
 LAN settings 
    You can make detailed wired LAN settings.
Click [Detailed set up] in the menu.1 
Click [Change] to change the LAN settings.2       
To return to the previous window, click [Back].
Complete the detailed settings and click 3 [Next].
When [Next] is clicked, the next page appears, enabling 
you to complete the detailed settings as desired.
Settings performed here are the same as the settings 
performed with the [Network] menu of the projector.
Click [Submit].4 
The settings will be registered.
Changing the setting of LAN while connected with LAN might disconnect the connection. 
						

							17
Using Web Browser (continued)
Ping test page
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS 
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
21 
						

							18
Using Web Browser (continued)
E-mail setup page
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be 
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1 Select Enable to use the e-mail function.
2 Enter the IP address or server name of the e-mail 
server (SMTP). The DNS server must be set if the 
server name is entered.
3 Enter the e-mail address of the projector. 
(maximum 63 characters)
4 The user can enter the location of, for example, 
the installed projector so that the recipient may 
easily identify the originator of the e-mail. 
(maximum 63 characters)
5 The user can modify the minimum time interval 
of temperature warning mail. The default value 
is 60 minutes. In this case, the user cannot send 
another mail for 60 minutes after sending previous 
temperature warning mail even the set warning 
temperature is reached again.
6 Select the temperature of the intake sensor at 
which to send a warning message.
1 Enter the E-mail Address1 of your desired recipient.
2 Select the conditions for sending e-mail.
     MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
6
5
4
3
2
1
2
1 
						

							19
Using Web Browser (continued)
E-mail setup page (continued)
1 Enter the E-mail Address2 of your desired recipient.
2 Select the conditions for sending e-mail.
     MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
2
1
Authentication set up page
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
1 Select the authentication method specified by 
your Internet service provider.
2 Set this if SMTP authentication has been 
selected.
3 POP server name field 
Available input characters: 
Alphanumeric characters (A - Z, a - z, 0 - 9), 
hyphen (-), period (.)
4 POP/SMTP server user name field
5 POP/SMTP server password field
6 Enter the port number for the SMTP server 
(normally “25”).
7 Enter the port number for the POP server 
(normally “110”).
8 Button to update settings
8
7
6
5
4
3
2
1 
						

							20
Using Web Browser (continued)
Contents of mail sent   
 Mail with the contents shown below is sent when the e-mail settings have been established.