Panasonic LCD Projector Pt Tw341 Operating Instructions

ENGLISH - 61
Vertical
Press the a button.Adjusts the upper of the keystone.
Press the s button.Adjusts the bottom of the keystone.
Note
 fThe white arrows indicate that there is no correction.
 fA red arrow indicates the direction of correction.
 fAn arrow disappears at the maximum correction.
[Corner correction]
1) Press as to select [Keystone].
2) Press the  button.
 fThe [Keystone] screen is displayed.
3) Press as to select [Corner correction].
4) Press the  button.
 fThe Corner correction arrows are...

62 - ENGLISH
ItemsOperationAdjustment
[Curved 
correction X/Y 
Gain]
Press the w button.Extend the vertical lines to left and 
right.
Press the q button.Dent the vertical lines to left and right.
Press the a button.Extend the horizontal lines to top and 
bottom.
Press the s button.Dent the horizontal lines to top and 
bottom.
[Curved 
correction X 
Offset]
Press the w button.
Used to correct the right side vertical 
lines. Extend the top and bottom while  
keeping the center part as it is.
Press the q...

ENGLISH - 63
3) Press as to select [Reset value].
4) Press the  button.
 fThe state of the keystone correction is released.
[Logo]
This function allows you to set the Logo select, the image capturing and\
 the Logo PIN code.
1) Press as to select [Logo].
2) Press the  button.
 fThe [Logo] screen is displayed.
3) Press as to switch the item.
 fThe items will switch each time you press the button.
[Logo select]Set the logo display when the projector start-up.
[Capture]The projected image is captured as a...

64 - ENGLISH
[Logo PIN code lock]
Set the Logo PIN code (three-digit).
1) Press as to select [Logo].
2) Press the  button.
 fThe [Logo] screen is displayed.
3) Press as to select [Logo PIN code lock].
4) Press the  button.
 fThe [Logo PIN code] input screen is displayed.
5) Press the  button.
6) Enter the Logo PIN code you have set according to the steps in "Enter a \
Logo PIN code".
 rEnter a Logo PIN code
i) Press as to select a number from 0 to 9.
ii) Press the  button. 
 fThe fixed number...

ENGLISH - 65
 fIf you entered an incorrect digit, the digit () will turn red and reset, and then re-enter a digit.
[Security]
Set the PIN code to prevent the unauthorized operation by the third party. The [PIN code] input screen will be displayed when 
turn on the projector.
1) Press as to select [Security].
2) Press the  button.
 fThe [Security] screen is displayed.
3) Press as to switch the item.
 fThe items will switch each time you press the button.
[PIN code lock]The [PIN code] screen will be...

66 - ENGLISH
 fThe [Security] screen is displayed.
3) Press as to select [PIN code change].
4) Press the  button.
 fThe [PIN code] input screen is displayed.
5) Enter the PIN code you have set according to the steps in "Enter a PIN c\
ode".
6) Press the  button.
 fThe [New PIN code] input screen is displayed.
7) Enter the New PIN code according to the steps in "Enter a PIN code".
[Power management]
This function optimizes lamp power according to the operating status to reduce power...

ENGLISH - 67
[Filter counter]
This function is used to reset the filter use time and set the warning display.
1) Press as to select [Filter counter].
2) Press the  button.
 fThe [Filter counter] screen is displayed.
3) Press as to switch the item.
 fThe items will switch each time you press the button.
[Filter counter]Displays the using time of the filter.
[Timer]Sets the time to display the warning  icon.
[Filter counter 
reset]Resets the filter counter.
Setting [Timer] 
1) Press as to select [Timer]....

68 - ENGLISH
 fThe selected test pattern is displayed and the menu screen is disappeare\
d.
Note
 fPress the  button to display the menu screen and select [Off] in [Test pattern] when you want to cancel the Test 
pattern function.
[Network]
Initializes the settings of network before using the network function.
[Network setting]
1) Press as to select [Network].
2) Press the  button.
 fThe [Network] screen is displayed.
3) Press the  button.
 fThe [Network setting] screen is displayed.
4) Press as to...

ENGLISH - 69
[All]Select when controlling projectors without specifying an ID number.
[Code 1] - [Code 6]Select when specifying an ID number to control individual projector.
4) Press the  button.
 f[Remote control] is set.
Note
 fTo specify an ID number for individual control, the ID number of a remote\
 control must match the ID number of the projector.
 fWhen the ID number is set to [All], the projector will operate regardless of the ID number specified by remote control. If 
multiple projectors are...

70 - ENGLISH
[Memory Viewer] menu
On the menu screen, select [Memory Viewer] from the main menu, and select an item from the submenu.Refer to “Navigating through the menu” (x page 43) for the operation of the menu screen.
 fAfter selecting the item, press as to set.
Note
 fThe [Memory Viewer] menu is available when input the [Memory Viewer] signal.
 fThe menu except for [Set Slide] which settings have been changed is not yet effective before the [Apply] is not executed.
[Set Slide]
Start the slide show....