Panasonic LCD Projector Pt Tw341 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Tw341 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
ENGLISH - 31 Connecting example : Computers Attention fWhen connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables. Note fIf you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate the projector. fWhen the terminal is connected with cable, the sound will not be output from the built-in speaker. Audio equipment Computer Control...
Page 32
32 - ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with.
Page 33
![Page 33
ENGLISH - 33
Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to “Read this first!” (x page 2).
Attaching
1) Check the shapes of the terminal on the back of the projector bo\
dy and the power cord
connector and insert the plug completely in the correct direction.
AC IN AC IN
Removing
1) Confirm that the projector is in standby mode, and remove the...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-32.png "Page 33
ENGLISH - 33
Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to “Read this first!” (x page 2).
Attaching
1) Check the shapes of the terminal on the back of the projector bo\
dy and the power cord
connector and insert the plug completely in the correct direction.
AC IN AC IN
Removing
1) Confirm that the projector is in standby mode, and remove the...")
ENGLISH - 33 Powering on/off Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. For details of power cord handling, refer to “Read this first!” (x page 2). Attaching 1) Check the shapes of the terminal on the back of the projector bo\ dy and the power cord connector and insert the plug completely in the correct direction. AC IN AC IN Removing 1) Confirm that the projector is in standby mode, and remove the...
Page 34
34 - ENGLISH Powering On the Projector Before switching on the projector, make sure all the other devices are correctly connected. (x pages 29 - 31) AC IN 2)1) 3) 3) 1) Connect the power cord to the projector body. 2) Connect the power plug to an outlet. fThe power indicator lights in red, and the projector will enter the standby mode. 3) Press the power button on the control panel or on the remote control. fThe power indicator blinks in red, after a while the indicator lights in green. fThe...
Page 35
![Page 35
ENGLISH - 35
Making adjustments and selections
It is recommended that images are projected continuously for at least 30\
minutes before the focus is adjusted.
3)
5)
3)
1) Adjust the focus of the image roughly. (x page 36)
2) Change the settings of the [Display] menu → [Project way] depending on the installation mode.
(x page 50)
fRefer to “Navigating through the menu” (x page 43) for the operation of the menu screen.
3) Press the button on the control panel or the input selecti\
on (,
, , , )...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-34.png "Page 35
ENGLISH - 35
Making adjustments and selections
It is recommended that images are projected continuously for at least 30\
minutes before the focus is adjusted.
3)
5)
3)
1) Adjust the focus of the image roughly. (x page 36)
2) Change the settings of the [Display] menu → [Project way] depending on the installation mode.
(x page 50)
fRefer to “Navigating through the menu” (x page 43) for the operation of the menu screen.
3) Press the button on the control panel or the input selecti\
on (,
, , , )...")
ENGLISH - 35 Making adjustments and selections It is recommended that images are projected continuously for at least 30\ minutes before the focus is adjusted. 3) 5) 3) 1) Adjust the focus of the image roughly. (x page 36) 2) Change the settings of the [Display] menu → [Project way] depending on the installation mode. (x page 50) fRefer to “Navigating through the menu” (x page 43) for the operation of the menu screen. 3) Press the button on the control panel or the input selecti\ on (, , , , )...
Page 36
![Page 36
36 - ENGLISH
Projecting
Check the connections of the peripheral devices (x pages 29 - 31) and connection of the power cord (x page 33) and
switch on the power (x page 34) to start the projector. Select the image and adjust the state of the image.
Selecting the input signal
Select an input signal.
1) Press the button on the control panel or the input select\
ion (, ,
, or ) buttons on the remote control.
fThe image of the signal being input in the selected terminal is projecte\
d.
Attention
fImages...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-35.png "Page 36
36 - ENGLISH
Projecting
Check the connections of the peripheral devices (x pages 29 - 31) and connection of the power cord (x page 33) and
switch on the power (x page 34) to start the projector. Select the image and adjust the state of the image.
Selecting the input signal
Select an input signal.
1) Press the button on the control panel or the input select\
ion (, ,
, or ) buttons on the remote control.
fThe image of the signal being input in the selected terminal is projecte\
d.
Attention
fImages...")
36 - ENGLISH Projecting Check the connections of the peripheral devices (x pages 29 - 31) and connection of the power cord (x page 33) and switch on the power (x page 34) to start the projector. Select the image and adjust the state of the image. Selecting the input signal Select an input signal. 1) Press the button on the control panel or the input select\ ion (, , , or ) buttons on the remote control. fThe image of the signal being input in the selected terminal is projecte\ d. Attention fImages...
Page 37
![Page 37
ENGLISH - 37
Basic operations by using the remote control
Using the automatic setup function
Input search, Auto PC adjustment (during signal input from a computer) and Auto Keystone correction works at the same time.
The Auto PC adjustment function can be used to automatically adjust the resolution, clock phase, and image position when
analog RGB signals consisting of bitmap images such as computer signals \
are being input. Supplying images with bright white
borders at the edges and high-contrast...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-36.png "Page 37
ENGLISH - 37
Basic operations by using the remote control
Using the automatic setup function
Input search, Auto PC adjustment (during signal input from a computer) and Auto Keystone correction works at the same time.
The Auto PC adjustment function can be used to automatically adjust the resolution, clock phase, and image position when
analog RGB signals consisting of bitmap images such as computer signals \
are being input. Supplying images with bright white
borders at the edges and high-contrast...")
ENGLISH - 37 Basic operations by using the remote control Using the automatic setup function Input search, Auto PC adjustment (during signal input from a computer) and Auto Keystone correction works at the same time. The Auto PC adjustment function can be used to automatically adjust the resolution, clock phase, and image position when analog RGB signals consisting of bitmap images such as computer signals \ are being input. Supplying images with bright white borders at the edges and high-contrast...
Page 38
![Page 38
38 - ENGLISH
Note
fFor more details about Memory Viewer function, refer to “Memory Viewer function” (x page 78).
fFor more details about USB display function, refer to “USB Display function” (x page 80).
Switching the aspect ratio of the image
You can switch aspect ratios according to the input signal.
button
1) Press the button on the remote control.
Note
fFor more details, refer to the [Display] menu → [Aspect] (x page 49).
Using the keystone distortion and curved correction functions
You can...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-37.png "Page 38
38 - ENGLISH
Note
fFor more details about Memory Viewer function, refer to “Memory Viewer function” (x page 78).
fFor more details about USB display function, refer to “USB Display function” (x page 80).
Switching the aspect ratio of the image
You can switch aspect ratios according to the input signal.
button
1) Press the button on the remote control.
Note
fFor more details, refer to the [Display] menu → [Aspect] (x page 49).
Using the keystone distortion and curved correction functions
You can...")
38 - ENGLISH Note fFor more details about Memory Viewer function, refer to “Memory Viewer function” (x page 78). fFor more details about USB display function, refer to “USB Display function” (x page 80). Switching the aspect ratio of the image You can switch aspect ratios according to the input signal. button 1) Press the button on the remote control. Note fFor more details, refer to the [Display] menu → [Aspect] (x page 49). Using the keystone distortion and curved correction functions You can...
Page 39
![Page 39
ENGLISH - 39
Note
fFor more details, refer to the [Info.] menu (x page 72).
Using the freeze function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1) Press the button on the remote control.
fThe video is paused and the audio is muted. The icon is displayed on the screen during Freeze.
2) Press the button again.
fThe video playback resumes and the audio is unmuted.
Note
fWhen no signal input, the key operation...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-38.png "Page 39
ENGLISH - 39
Note
fFor more details, refer to the [Info.] menu (x page 72).
Using the freeze function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1) Press the button on the remote control.
fThe video is paused and the audio is muted. The icon is displayed on the screen during Freeze.
2) Press the button again.
fThe video playback resumes and the audio is unmuted.
Note
fWhen no signal input, the key operation...")
ENGLISH - 39 Note fFor more details, refer to the [Info.] menu (x page 72). Using the freeze function You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device. button 1) Press the button on the remote control. fThe video is paused and the audio is muted. The icon is displayed on the screen during Freeze. 2) Press the button again. fThe video playback resumes and the audio is unmuted. Note fWhen no signal input, the key operation...
Page 40
![Page 40
40 - ENGLISH
Using the digital zoom function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
1) Press the or < D.ZOOM -> button on the remote control.
fThe [D. zoom] individual adjustment screen is displayed.
fPress asqw on the remote control to move the display position during zoom in.
[D.zoom] individual adjustment
screenOperationAdjustmentAdjustment range...](http://img.usermanuals.tech/thumb/58/75997/w300_pt-tw341_en_om_d-39.png "Page 40
40 - ENGLISH
Using the digital zoom function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
1) Press the or < D.ZOOM -> button on the remote control.
fThe [D. zoom] individual adjustment screen is displayed.
fPress asqw on the remote control to move the display position during zoom in.
[D.zoom] individual adjustment
screenOperationAdjustmentAdjustment range...")
40 - ENGLISH Using the digital zoom function (Only for still image-based computer (RGB) and still image-based HDMI signals input) You can enlarge the center area. You can also change the location of the area to be enlarged. buttons 1) Press the or < D.ZOOM -> button on the remote control. fThe [D. zoom] individual adjustment screen is displayed. fPress asqw on the remote control to move the display position during zoom in. [D.zoom] individual adjustment screenOperationAdjustmentAdjustment range...