Panasonic LCD Projector Pt Tw341 Operating Instructions

ENGLISH - 41
2) Press the  button again.
 fThe audio turns on.
Using the Daylight View Lite function
The Daylight View Lite function improves the vividness of the image even if it is proj\
ected under a bright light.
button
1) Press the  button on the remote control. 
 fThe Daylight View Lite function will be switched enable/disable each time you press th\
e button.
Note
 fFor details, please refer to the [Color adjust] menu → [Daylight View] (x page 53).
Chapter 3   Basic Operations - Basic operations...

42 - ENGLISH
Chapter 4   Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.  

ENGLISH - 43
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 
button
1) Press the  button on the remote control or the control panel.
 fThe main menu screen appears.
2) Press as to select an item from the main menu.
 fThe selected item is highlighted in orange.
3) Press the  button.
 fThe submenu is displayed, and submenu items become selectable.
(there is no lower menu under the...

44 - ENGLISH
5) Press as to switch or adjust settings.
 fSome items will switch in order as follows each time you press as.
ABC
6) Press the  button or the  button.
 fThe changed settings or the adjusted value is confirmed. 
7) Press as to select a sub-menu item, press the  button.
 fSwitches to the next layer of the menu screen.
8) Press the  button.
 fIf the selected item can be set or adjusted,  will be displayed.
9) Press as to switch or adjust settings.
 fSome items will switch in order as follows...

ENGLISH - 45
Sub menu
The sub-menu screen of the selected main menu appears, and you can set a\
nd adjust the various items in the submenu.
[Display]  
Sub-menu itemFactory defaultPage
[Auto PC adj.]*1-48
[Fine sync]*1-48
[H Position]*1-48
[V Position]*1-49
[H.Size]*1-49
[Aspect][Normal]49
[Project way][Front]50
[Menu position][Upper left]50
[Background display][Blue]50
[System]-50
*1 Only for computer signals.
[Color adjust]  
Sub-menu itemFactory defaultPage
[Image mode][Standard]51
[Contrast][32]51...

46 - ENGLISH
Sub-menu itemFactory defaultPage
[Keystone][Store]60
[Logo]-63
[Security]-65
[Power management][Shut down]66
[Filter counter]-67
[Test pattern][Off]67
[Network]-68
[Remote control][All]68
[Factory default]-69
[Memory Viewer]  
Sub-menu itemFactory defaultPage
[Set Slide]-70
[Slide Transition Effect][Slide Right]70
[Sort Order][Name Order]70
[Rotate][No Rotate]70
[Best Fit][Off]71
[Repeat][Off]71
[Apply]-71
[Info.]  
Details (x page 72)
Note
 fSome items may not be adjusted or used for...

ENGLISH - 47
[Input] menu
To select the input source directly by pressing the input selection butto\
ns on the remote control or to select the 
input source in the [Input] screen by pressing the  button \
on the control panel.
Switching the input source
When using the remote control
1) Press the input selection (, , , ,\
 ) buttons. 
 fTo project the corresponding input signal of the selected terminal.
Switches to Computer 1/Component input.
Switches to Computer 2 input.
Switches to HDMI input.
Switches...

48 - ENGLISH
[Display] menu
On the menu screen, select [Display] from the main menu, and select an i\
tem from the submenu.Refer to “Navigating through the menu” (x page 43) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[Auto PC adj.]
(Only for computer signals input)
When input the computer (RGB) signals, the image may be moved up, down, left or right such as flickering, press the  button to adjust [Fine sync], [H position], [V position] and [H.Size] automatically...

ENGLISH - 49
OrientationOperationAdjustment
Horizontal (left and 
right) adjustment.
Press the a button.The image position moves to the right.
Press the s button.The image position moves to the left.
Note
 f[H Position] is not available while the image is expanded in the digital zoom function.
[V Position]
(Only for computer signals input)
Move the image position vertically if the image position projected on th\
e screen is shifted even when the relative position of the 
projector and the screen is...

50 - ENGLISH
[Project way]
Set the projection method in accordance with the installation status of \
the projector.
Change the projection method if the screen display is upside down or inverted.
1) Press as to select [Project way]. 
2) Press the  button.
3) Press as to switch the item.
 fThe items will switch each time you press the button.
[Front]When installing the projector on the desk, etc. in front of the screen.
[Rear]When installing the projector on the desk, etc. behind the screen (with a...