Panasonic LCD Projector Pt Lx22E Operating Instructions

Image adjust 
ENGLISH - 41
Settings
Select [Image adjust] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote ControlControl Panel
Contrast
Press ▲▼ to select [Contrast].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the setting value.3 ) 
OperationAdjustmentAdjustment 
range
Press ►.increase the contrastMaximum 
value 63
Press ◄.decrease the 
contrast
Minimum 
value 0
Brightness
Press ▲▼ to select...

Image adjust 
42 - ENGLISH
Settings
Red 
Press ▲▼ to select [Red].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the setting value.3 ) 
OperationAdjustmentAdjustment 
range
Press ►.deepen red toneMaximum 
value 63
Press ◄.lighten red toneMinimum 
value 0
Green
Press ▲▼ to select [Green].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the setting value.3 ) 
OperationAdjustmentAdjustment 
range
Press ►.deepen green 
tone
Maximum...

Image adjust 
ENGLISH - 43
Settings
Progressive
Press ▲▼ to select [Progressive].1 ) 
Press the  button to display 2 ) 
the dialog box.
Press ◄► to select the desired item.3 ) 
An interlaced video signal can be displayed in  z
progressive mode. Select one of the following 
options.
Progressive cannot be selected when [480p],  z
[576p], [720p], [1035i] or [1080i] is selected.
OffDisabled
L1For an active picture
L2For a still picture
FilmFor watching a film
Note
When input video signal to the projector,...

Screen 
44 - ENGLISH
Settings
Screen 
Select [Screen] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote ControlControl Panel
Normal
Provide the image to fit the screen size while 
maintaining the aspect ratio of the input signal.
Press ▲▼ to select [Normal] and then 
press the  button.
Full 
Provide the full screen image.
Press ▲▼ to select [Full] and then press 
the  button.
Wide(16:9)
Provide the image at the 16:9 wide screen ratio....

ENGLISH - 45
Settings
Digital zoom +
Zoom in the images.
Press ▲▼ to select [Digital zoom +] 1 ) 
and then press the  button.
The On-Screen Menu disappears and              z
[D. zoom + ] appears.
Press the  button to zoom in  2 ) 
the image size and press ▲▼ ◄►to 
move the image to the top/ bottom/ 
left/ right of the screen.
The Panning function can work only when the  z
image is larger than the screen size. A projected 
image can be also zoomed in by pressing the 
 or the  button.
Digital zoom -
Zoom...

Setting
46 - ENGLISH
Settings
Select [Setting] from the Main Menu (see 
“Navigating through the menu” on page 32), 
then select the item from the sub-menu.
Remote ControlControl Panel
Language
Press ▲▼ to select [Language].1 ) 
Press ► or the  button.2 ) 
Press ▲▼ to select the desired 3 ) 
language.
The language used in the On-Screen Menu is  z
available in English, German, French, Italian, 
Spanish, Portuguese, Dutch, Swedish, Finnish, 
Norwegian, Danish,  Polish, Hungarian, Romanian, 
Czech, Russian,...

Setting
ENGLISH - 47
Settings
Auto keystone J
AutoAlways works and corrects keystone 
distortion according to the projector's tilt.
ManualWorks only when pressing the  button on the remote control or 
the control panel. 
OffDisables Auto Keystone.
Note
[Input search], [Auto PC adj.] and [Auto Keystone] cannot  z
be set [Off] at the same time.
The [Auto Keystone] function cannot work when the  z
[Ceiling feature] is set [On] in the [Screen] menu.
Background
Select the background screen for when no...

Setting
48 - ENGLISH
Settings
Logo PIN code change J
Logo PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [Logo PIN code 1 ) 
change].
Press the  button.2 ) 
Current logo PIN code dialog box appears. z
Press ▲▼ to enter the current code.3 ) 
The New Logo PIN code input dialog box  z
appears. Set a new Logo PIN code, a 
confirmation box appears, choose [Yes] to set 
the new [Logo PIN code].
Attention
Be sure to note the new Logo PIN code and keep it on  z
hand. If you lost...

Setting
ENGLISH - 49
Settings
Mode J
Press ▲▼ button to select one mode 1 ) 
among the items as below.
Count up
The [P-timer] display 000:00 
appears on the screen and the 
count up starts (000:00-180:00)
Count downThe time set in the [Time] setting 
appears on the screen and the 
countdown starts.
Timer J
Press ▲▼ to select [Timer] and then 1 ) 
press the  button.
Press▲▼ to set the [Timer](1-180 Min).2 ) 
Timer is available in [Count down] only. Factory  z
default value is 10 Min.
Execute J
Press ▲▼ to...

50 - ENGLISH
Settings
Lamp power
This function allows you to change brightness of the 
screen.
Press ▲▼ to select [Lamp power] and 1 ) 
then press the  button .
Press ▲▼ to select one among the 2 ) 
modes as below.
You can also press the  button to  z
display [Lamp power].
 HighBrighter than the Normal mode.  
NormalNormal brightness.
Eco
Lower brightness reduces the 
lamp power consumption and 
extends the lamp life.
Remote control
This switching function prevents remote control 
interference when...