Panasonic LCD Projector Pt Lx22E Operating Instructions

Precautions for Use
ENGLISH - 11
Important 
 
Information
Cautions when setting the projectors J
 zDo not stack the projectors.
Do not block the ventilation ports (intake and exhaust) of the  z
projector.
Avoid heating and cooling air from the air conditioning system  z
directly blow to the ventilation ports (intake and exhaust) of the 
projector.
Make sure that there is no object under the projector to prevent  z
from covering the bottom openings. 
SERIAL INCOMPUTER IN /
COMPONENT INVIDEO INS-VIDEO IN...

Precautions for Use
12 - ENGLISH
Important 
 
InformationCautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air  z
conditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
ENGLISH - 13
Important 
 
Information
Accessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the 
number of accessories.
Remote control unit (x1)
(6451051684)
Power cord (x1)
(6103580203)
CD-ROM (x1)
(6103579764)
Batteries (AAA/R03 or 
AAA/LR03 type) (x2)
(for remote control unit)
RGB signal cable (x1)
( 6103580425)
Filter cover (x1)
(6103593265) 
AC power cord holder 
(x1) (6451052124)
Lens cap (x1)
(6103578101)
String (x1)...

Precautions for Use
14 - ENGLISH
Important 
 
InformationContents of the supplied CD-ROM J
The contents of the supplied CD-ROM are as follow. [: Instructions/List (PDF), : Software]
Operating Instructions – Projector Operations.
Logo Transfer Software 2.0 (Windows)
This software allows you to create original images, such as company logos to be displayed when projection • 
starts, and transfer them to the projector.
This projector can be used only with RS-232C control. • 
 
Operation Manual Logo...

ENGLISH - 15
Preparation
About Your Projector
Remote control
(1)  Button
  Execute the setting of Auto setup in the setting. 
  menu. (Æpage 46)
(2) Input Selection Buttons: , 
, , . 
  These buttons are used to select the input signal. 
  (Æpage 29)
(3) ▲▼◄► Buttons,  Button
  Navigate the MENU display.(Æpage 32)
(4)  Button
  Select a screen mode. (Æpage 44)
(5)  Button
  Open or close the On-Screen Menu. (Æpage 32)
(6)  Button
     Pause the projected image tentatively. (Æpage 30)
(7)  Button...

About Your Projector
16 - ENGLISH
Preparation
(1) Remote control signal receiver
(2) Projection Lens 
(3) Focus Ring 
     Adjust the focus.
(4) Air intake port 
(5) AC IN
(6) Air outlet port
Hot air is exhausted from the exhaust vent. Do • 
not put heat-sensitive objects near this side.
(7) Zoom Ring
Adjust the zoom.
(8) Control Panel and Indicators (Æpage 17)
(9) Lamp cover (Æpage 58)
     The lamp unit is located inside.
(10) Terminals (Æpage 17)
(11) Air filter (Æpage 56)
(12) Adjustable foot
Adjust...

About Your Projector
ENGLISH - 17
Preparation
Rear terminals
Control panel 
(1) VIDEO IN
Connect to VIDEO input signals.
(2) COMPUTER IN / COMPONENT IN / S-VIDEO IN
Connect to COMPUTER IN / COMPONENT IN  / 
S-VIDEO input signals.
(3) SERIAL IN
     Connect to a computer via an RS-232C cable.
(4) Security slot
Attach the commercial shackle lock, manufactured 
by Kensington, to protect your projector. 
Compatible with the Kensington MicroSaver 
Security System.
(3)  Button
Execute the setting of Auto setup...

Using Remote control
18 - ENGLISH
Preparation
Using Remote control
Installing and Removing batteries
Open the cover1 ) Install batteries and close the cover2 ) 
(Insert the – side first.)
Remove the batteries in the reverse order of  z
installation. 
Setting Remote control ID numbers
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each 
projector individually using single remote control, if unique ID number is assigned to each projector.
After...

ENGLISH - 19
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.
 JMounting on the ceiling and  
projecting forward
 JSetting on a desk/floor and  
projecting from rear
(Using translucent screen)
 JMounting on the ceiling and  
projecting from rear
(Using translucent screen)
 JSetting on a desk/floor and  
projecting forward
Attention
For optimum viewing quality, install the projector in a...

Setting up
20 - ENGLISH
Getting Started
Screen size and throw distance
Place the projector referring 
to the diagram on the right 
and the figures of throwing 
distance. You can adjust the 
display size.
L (LW/LT)
Screen
L (LW/LT)
SW
Screen
SH
SW
SD
Projected image
SH
L (LW/LT) *1Projection distance (m)
SHHeight of the projection area (m)
SWWidth of the projection area (m)
SDDiagonal length of the projection area (m)
LW : Minimum distance *1 : 
LT : Maximum distance
Attention
Before installing, please...