Panasonic LCD Projector PT-LW80NTU Operating Instructions

PICTURE menu
ENGLISH - 31
Settings
You can perform more detailed image adjustment 
manually.
JFor S-VIDEO/VIDEO signals
Q TV-SYSTEM
When the video signal is changed, the setting 
switches automatically. You can switch the setting 
manually to match the video data. Press  I H to 
cycle through the options.
Q STILL MODE
You can reduce the vertical flicker when projecting 
a still image.
 OFF: Deactive
  ON: Active
Q NOISE REDUCTION
You can switch the automatic noise reduction 
system on/off. Press  I H  to...

ENGLISH - 32
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
the keystone will be corrected automatically. Press I H 
to select the required setting.
  ON: Active
  OFF: Deactive
If you need to correct the angle of the projection even 
when the  REALTIME KEYSTONE  is activated, you can 
correct the keystone manually. You can move the projected image for fine adjustment. 
Press 
I H to move horizontally and  F G...

POSITION menu
ENGLISH - 33
Settings
You can switch the aspect ratio manually when needed. 
Press I H  to cycle through the options.
J Aspect ratio options
Q AUTO
Signals which contains an identifying aspect signal 
will be detected and auto matically project the 
image in proper ratio.
Q 4:3
When a 4:3 or 5:4 signal  is detected, the image will 
be projected without any change, and other signals 
will be adjusted to 4:3 with  preserving original ratio.
Q16:9
When a 16:10, 16:9 or 15:9 signal is detected,...

Settings
POSITION menu
ENGLISH - 34
JAspect ratio depend on signals 
and SCREEN FORMAT menu 
option
If the 4 edges of an image is  partly dropped, you can use 
this function to adjust and project it properly. (Not 
available with signals of  COMPUTER/WIRELESS)
 H: Enlarge
 
I:S hrin k
If the projected image is degraded, you can activate 
FRAME LOCK  for synchronisation. Press  I H to select 
the required option. (Available with signals of  RGB only)
 OFF Deactive
  ON Active
SCREEN 
FORMAT  menu
ASPECT...

ENGLISH - 35
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H  to 
cycle through the options.
You can switch the logo on/off that is displayed when 
starting up the projector. Press  I H to select the 
required option.  STARTUP LOGO  will be displayed for 
30 seconds.
  ON Active
  USER Display the original text
  OFF Deactive
QEditing the original text
If you select USER , you can...

Settings
OPTION menu
ENGLISH - 36
You can adjust the power of the lamp to save electricity, 
prolong the lamp life and reduce the noise.
 STANDARD When higher luminance is required
  ECO-MODE When lower luminance is sufficient
You can check how long the lamp has been used.
You can set the off timer to  switch off the power of the 
projector after a certain period of time automatically 
when no signal is detected. Press  I H to select the 
required period from 15 to 60 minutes at intervals of 
5 minutes....

OPTION menu
ENGLISH - 37
Settings
Select the required screen format by pressing IH.
 16:10 When project on a 16:10 or 4:3 
screen.
  16:9 When project on a 16:9 screen.
If the input signal contains  closed captions, you can turn 
on the feature and switch the channels. CLOSED CAPTION
 OFF Deactive
  ON Active
MODE
 CC1  - 4 Change the channels  CC1 - 4
You can select a useful function from the list and assign 
to the FUNCTION  button for shortcut. 
1. Press the ENTER  button.
2. Press  FG to select the...

Settings
OPTION menu
ENGLISH - 38
JAUDIO BALANCE
You can adjust to hear the sound played equally 
through both right and left external stereo 
speakers, or shif t the balance so more sound plays 
through the left or right side.
  I More sound plays through the left 
side
  H More sound plays through the right 
side
JINITIALIZE ALL
You can reset all of the customized settings to the 
factory defaults except  WIRELESS and LAMP 
RUNTIME  menu settings.
1. Press the ENTER  button
2. Turn off the projector by...

ENGLISH - 39
Settings
SECURITY menu
JEntering the SECURITY menu
Every time when you apply to the  SECURITY 
menu, you will be asked to perform the password 
operation.
Q Before you change the password to 
your original
Perform to input the fo llowing factory default 
password operation. 
1. Perform  F H  G  I  F  H  G  I .
2. Press the  ENTER button.
QAfter you change the password
You can change to your original password in the 
PASSWORD CHANGE  menu. 
1. Perform the original password operation.
2. Press...

Settings
SECURITY menu
ENGLISH - 40
You can enter your original text up to 22 characters for 
TEXT DISPLAY. 1. Use F
 G  I H to specify the location of the 
required character and press the  ENTER button. The selected character will be displayed in the  TEXT 
CHANGE  box.
2. Repeat step 1 until finish your original text.
 To delete all the entered c haracters, move the cursor 
to ALL DELETE  and press the ENTER button.
  To insert a character in the entered text line, move 
the cursor to the text box to...