Panasonic LCD Projector Pt Lw362 Operating Instructions

							Operating Instructions
Functional Manual
LCD Projector   Commercial Use
Thank you for purchasing this Panasonic Product.
 ■ This manual is intended for products manufactured from May 2016 and beyo\
nd.
 ■ Before operating this product, please read the instructions carefully, and save this manual 
for future use.
 ■ Before using your projector, be sure to read “Read this first!” (x pages 2 to 9).
  Model No.	 PT-LW362
			PT-LW312
			PT-LB412
			PT-LB382
			PT-LB332
ENGLISH
TQBJ0839-2 
						

							Read this first!
2 - ENGLISH
Read this first!
WARNING:THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direct field of view .The equipment is not intended for used at a video workstation in complia\
nce BildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a\
 prolonged period of time.2.  
To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.3.  
Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing type mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If you are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of t\
he earthing plug.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
o
7&35*44&.&/53*426&
%&
$)0$
¬-&$53*26&
/&
14
0673*3
83/6/(;63
7&3.&*%6/(
&*/&4

&-&,53*4$)&/
4$)-(&4
(&3¨5
/*$)5
¹/&/
ПРЕД УПРЕЖДЕНИЕОПАСНОС ТЬ ПОР АЖЕНИЯ
Э ЛЕКТРИЧЕСКИМ Т ОКОМ НЕ ОТКРЫВ АТЬ.
경고감전 위험이 있으므로 열지마십시오.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
7
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING:
TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLETBEFORE REPLACING THE LAMP UNIT.
CAUTION:To assure continued compliance, follow the attached installation instruct\
ions. This includes using the provided power cord and shielded interface cables when connecting to com\
puter or peripheral devices. Also, 
any unauthorized changes or modifications to this equipment could void the user's authority to operate this device.
This is a device to project images onto a screen, etc., and is not inten\
ded for use as indoor lighting in a domestic environment.
Directive 2009/125/EC
Importer's name and address within the European Union 
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany  
						

							Read this first!
ENGLISH - 3
CAUTION (North/Middle/South America)
CAUTION:This equipment is equipped with a three-pin grounding-type power 
plug. Do not remove the grounding pin on the power plug. This plug 
will only fit a grounding-type power outlet. This is a safety feature. If 
you are unable to insert the plug into the outlet, contact an electricia\
n. 
Do not defeat the purpose of the grounding plug.Do not remove
FCC NOTICE (USA)
Declaration of Conformity
Model Number:  PT-LW362 / PT-LW312 / PT-LB412 / PT-LB382 / PT-LB332
Trade Name:  Panasonic
Responsible Party:  Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact:  http://www.panasonic.com/support
Projector Contact:  http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized 
modifications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction\
s, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television\
 reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne of the 
following measures:
 fReorient or relocate the receiving antenna.
 fIncrease the separation between the equipment and receiver.
 fConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 fConsult the dealer or an experienced radio/BD technician for help.
The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes 
using the provided power cord and shielded interface cables when connect\
ing to computer or peripheral 
devices. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to 
operate this device.
WARNING:
 •Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data 
Processing Equipment, ANSI/NFPA 75.
 •For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the 
building installation wiring.
 •For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily 
accessible.  
						

							Read this first!
4 - ENGLISH
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in 
this plug. Should the fuse need to be replaced, please ensure that the r\
eplacement fuse has a rating of 13 amps and that it 
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark  or the BSI mark  on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an 
Authorised Service Center.
If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the followi\
ng code:
Green - and - Yellow:  Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not c\
orrespond with the coloured markings identifying the 
terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the plug which is 
marked with the letter E or by the Earth symbol  or coloured GREEN or GREEN - AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the\
 plug which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
13A250VBS1363/A
HE-8 N
ASAL
Notice (USA only):
 •This product has a High Intensity Discharge (HID) lamp that contains mercury
. Disposal may be regulated 
in your community due to environmental considerations. For disposal or recycling information, please visit 
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
        Contains mercury / Contenu avec mercure
For more information on safe handling  
procedures, the measures to be taken in  
case of accidental breakage and safe  
disposal options visit: 
ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with  
applicable laws.
Pour plus de renseignements sur les  
procédures de manutention sécuritaire, les  
mesures à prendre en cas de bris accidentel et  
les options d’élimination sécuritaire visitez:
ec.gc.ca/mercure-mercury/.
Mettez au rebut ou recyclez conformément  
aux lois applicables.  
						

							Read this first!
ENGLISH - 5
WARNING:
 „POWER
The wall outlet shall be installed near the equipment and shall be easil\
y accessible when problems oc-
cur. If the following problems occur, disconnect the power plug from the wall outlet immediately.
Continued use of the projector in these conditions will result in fire or electric shock.
 zIf foreign objects or water get inside the projector, disconnect the power plug from the wall outlet.
 zIf the projector is dropped or the cabinet is broken, disconnect the pow\
er plug from the wall outlet.
 zIf you notice smoke, strange smells or noise coming from the projector, disconnect the power plug from the 
wall outlet.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or fire will result.
 zDo not damage the power cord, make any modifications to it, place it near any hot objects, bend it 
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power conn\
ector into the projector 
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
 zDo not use plugs which are damaged or wall outlets which are coming loos\
e from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in electric shocks or fire. Please note that if you do not use the provided power 
cord to ground the device on the side of the outlet, this may result in \
electric shocks.
Clean the power plug regularly to prevent it from becoming covered in du\
st.
Failure to observe this will cause a fire.
 zIf dust builds up on the power plug, the resulting humidity can damage t\
he insulation.
 zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry clot\
h regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
 „ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge m\
ats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.
Do not set up the projector in humid or dusty places or in places where \
the projector may come into 
contact with oily smoke or steam.
Using the projector under such conditions will result in fire, electric shocks or components deterioration. Com-
ponents deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling 
to fall down.
Do not install this projector in a place which is not strong enough to t\
ake the full weight of the projec-
tor or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage 
could result.
Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly it can cause in\
jury or accidents, such as electric shocks.
 zBe sure to use the wire provided with the projector mount bracket for ceiling mount as an extra safety mea-
sure to prevent the projector from falling down (Install in a different location to the ceiling mount bracket).
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector .
 zDo not place the projector in narrow, badly ventilated places.
 zDo not place the projector on cloth or papers, as these materials could \
be drawn into the air intake port.
 zProvide at least 1 m (40") of space between any walls or objects and the exhaust port, and at least 50 cm 
(20") of space between any walls or objects and the intake port.  
						

							Read this first!
6 - ENGLISH
WARNING:
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
 zHeated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot 
withstand heat close to this port.
Do not look and place your skin into the lights emitted from the lens wh\
ile the projector is being used.
Doing so can cause burns or loss of sight.
 zStrong light is emitted from the projector’s lens. Do not look or place your hands directly into this light.
 zBe especially careful not to let young children look into the lens. In a\
ddition, turn off the power and discon-
nect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
 zFor any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector . Do not allow 
the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the projec-
tor.
 zDo not place containers of liquid or metal objects near the projector.
 zIf liquid enters inside of the projector, consult your dealer.
 zParticular attention must be paid to children.
Use the ceiling mount bracket specified by Panasonic.
Defects in the ceiling mount bracket will result in falling accidents.
 zAttach the supplied safety cable to the ceiling mount bracket to prevent\
 the projector from falling down.
Do not touch or remove the rubber cap at the bottom of the projector.
 zDoing so will cause burns because the temperature is very high when the \
lamp is lighting and for a while 
after the lamp is turned off.
 „ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
 zDo not use unspecified batteries.
 zDo not use chargeable batteries.
 zDo not disassemble dry cell batteries.
 zDo not heat the batteries or place them into water or fire.
 zDo not allow the + and - terminals of the batteries to come into contact with metallic objects s\
uch as neck-
laces or hairpins.
 zDo not store or carry batteries together with metallic objects.
 zStore the batteries in a plastic bag and keep them away from metallic ob\
jects.
 zMake sure the polarities (+ and -) are correct when inserting the batteries.
 zDo not use a new battery together with an old battery or mix different types of batteries.
 zDo not use batteries with the outer cover peeling away or removed.
Do not allow children to reach the batteries and the rubber cap that is \
removed from the bottom of the 
projector.
Accidentally swallowing them can cause physical harm.
 zIf swallowed, seek medical advice immediately.
If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary .
 zBattery fluid on your skin or clothing could result in skin inflammation or injury.  
Rinse with clean water and seek medical advice immediately.
 zBattery fluid coming in contact with your eyes could result in loss of sight.  
In this case, do not rub your eyes. Rinse with clean water and seek medi\
cal advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will 
result.
 zThe lamp can easily explode if struck against hard objects or dropped.
 zBefore replacing the lamp, be sure to disconnect the power plug from the\
 wall outlet.  
Electric shocks or explosions can result if this is not done.
 zWhen replacing the lamp, turn the power off and allow the lamp it to cool for at least 1 hour before handling 
it otherwise it can cause burns.  
						

							Read this first!
ENGLISH - 7
WARNING:
Do not use the supplied power cord with devices other than this projecto\
r.
 zUsing the supplied power cord with devices other than this projector may\
 cause short circuits or overheat-
ing, and result in electric shock or fire.
Remove the depleted batteries from the remote control promptly.
 zLeaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.
CAUTION:
 „POWER
When disconnecting the power cord, be sure to hold the power plug and po\
wer connector.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric 
shocks will result.
When not using the projector for an extended period of time, disconnect \
the power plug from the wall 
outlet.
Failure to do so may result in fire or electric shock.
Disconnect the power plug from the wall outlet before carrying out any c\
leaning and replacing the unit.
Electric shocks can result if this is not done.
 „ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or 
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
 zBe especially careful not to let young children stand or sit on the proj\
ector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in fire.
 zTake particular care in locations exposed to direct sunlight or near stoves.
Do not place the projector where it may be affected by salt or corrosive\
 gas.
Doing so may cause the projector to become faulty due to corrosion. 
Do not place objects in front of the lens while the projector is being u\
sed.
Doing so can cause fire or damage to the object and can cause the projector to malfunction.
 zExtremely strong light is emitted from the projector’s lens.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
 zExtremely strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks to 
occur.
When mounting the projector on the ceiling, keep mounting screws and pow\
er cord from contacting 
with metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
Never plug headphones and earphones into  terminal.
Excessive sound pressure from earphones and headphones can cause hearing loss.
 „ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the 
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which 
contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces will cause injury.
 zIf you believe that you have absorbed the gas or that the gas has got in\
to your eyes or mouth, seek medical 
advice immediately.
 zAsk your dealer about replacing the lamp unit and check the inside of th\
e projector.  
						

							Read this first!
8 - ENGLISH
Brazil Only
Brasil Apenas
 „Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias deverão 
ser entregues ao estabelecimento comercial 
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Como isolar os terminais 
Não  desmonte,  não  remova  o  invólucro,  nem  amasse  a  bateria.  O  gás  liberado  pela  bateria  pode  irritar  a garganta,  danificar  o  lacre  do  invólucro  ou  o  vazamento  provocar  calor,  ruptura  da  blindagem  e  produzir  fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem ficar expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danificar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado internamente.Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água. Caso haja irritação, consulte um médico.
 „Remoção das baterias
1.  Pressione a guia e levante a tampa.2.  Remova as baterias.
(ii)
(i)
Fita Isolante
Fita Isolante
CAUTION:
When not using the projector for an extended period of time, remove the \
batteries from the remote 
control.
Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire or 
contamination of surrounding area.
 „MAINTENANCE
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in fire.
 zFor cleaning fee, ask your dealer.  
						

							Read this first!
ENGLISH - 9
To remove the battery
1. Press the guide and lift the cover.2. Remove the batteries.
(ii)
(i)
 rTrademarks, etc.
 fWindows, Windows Vista and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
 fMac, Mac OS, OS X, iPad, iPhone, iPod touch and Safari are trademarks of Apple Inc., registered in the United States and other countries.
 fIOS is a trademark and registered trademark of Cisco in the United States and other countries and is used under license.
 fAndroid is a trademark of Google Inc.
 fHDMI, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI 
Licensing LLC.
 fVueMagic is a trademark of Pixelworks, Inc.
 fPJLink™ is a trademark or pending trademark in Japan, the United States, and other countries and regions.
 fAdobe and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc. in the United States and/or other countries.
 fAll other names, company names, and product names mentioned in this manu\
al are trademarks or registered trademarks of their respective owners.
Please note that the ® and TM symbols are not specified in this manual.
 rSoftware information regarding this product
This product incorporates the following software.
(1) The software which is developed independently by or for Panasonic Corporation(2) The software owned by third party and licensed to Panasonic Corporation(3) The software which is licensed under the GNU GENERAL PUBLIC LICENSE Version2.0 (GPL V2.0)(4) The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version2.1 (LGPL V2.1)(5) Open source software which is not licensed under the GPL V2.0 and LGPL V2.1
The software categorized as (3) ~ (5), the license is available in accordance with gnu general public license and gnu lesser general public license respectively, it is distributed in the hope that it will be useful, but without any \
warranty, without even the implied warranty of merchantability or fitness for a particular purpose. As for the terms and conditions, please refer to the soft-ware license of the supplied CD-ROM.
If you wish to ask any questions as to the software, please contact (sav [email protected]) by email.
 rIllustrations in these operating instructions
 fIllustrations of the projector, screen, and other parts may vary from the actual product. 
 rPage references
 fReference pages in this manual are indicated as : (x page 00).
 rTerms
 fIn this manual, the “Wireless remote control unit” accessory is referred to as the “Remote control”.
 fThe  button on the control panel is functioned as the  button when the menu screen is displayed.  The operating procedure of menu screen is described as "Press the  button" in this manual in order to unify the control panel operation with the remote control operation.  
						

							10 - ENGLISH
Features of the Projector
Comfortable viewing in a bright 
environment
 /£The high contrast ratio 12 000 : 1 is 
achieved in a compact body. 
 /£The low noise level 28 dB*1 supports 
comfortable viewing during quiet scenes.
 /£Supports comfortable viewing in a bright 
room by pressing the  
button on the remote control. (Daylight 
View Lite function) 
*1 When [Lamp control] is set to [  (Eco 2)] 
Abundant Image correction Function
 /£H/V Keystone, Corner correction and 
Curved correction functions allow you to 
correct the image to fit the screen.
Reduced maintenance costs
 /£Maintenance costs are reduced by use of a 
recommended lamp replacement interval of 
10 000 H*1.
*1  When [Lamp control] is constantly set to [  (Eco 2)] 
without switching to other modes  
This time is only the target for replacement and not the 
warranty time.
Quick Steps
For details, see the corresponding pages.
1. Set up your projector.  
(x page 26)
2. Connect with other devices.  
(x page 31)
3. Connect the power cord.  
(x page 35)
4. Power on. 
(x page 36)
5. Select the input signal.  
(x page 38)
6. Adjust the image.  
(x page 38)