Panasonic LCD Projector PT-L730NTU Operating Instructions

31
Basic Operation
OPTIONSHUTTER
OSD
A U TO KEYS TONE
RGB/YPbPr
A U TO RGB IN
RGB2 SELECT
B ACK COLOR
F R ONT/REAR
DESK/CEILING
LAMP P OWER
LAMP  RUN  TIME
NEXT  PA GE 
↓10 H
OFF
OFF
RGB OFF
INPUT BLUE
F R ONT
DESK L O W ON
ON
YPbPr ON
OUTPUT BL ACK
REAR
CEILING HIGH
SELEC T:[
↑][↓]  ENTER:[ENTER]
ESC  :[MENU]
OPTION menu
 (page  43)
OPTIONPREVIOUS PAGE ↑FAN CONTROL
WEB CONTROL
WEB STANDBY
WEB PASSWORD
CONTROL KEY
FUNC1 STANDARD
OFF
OFF
OFF
MUTE HIGH
ON
ON
ON
KEYSTONE
SELECT:[
↑][↓]
ADJUST:[ ←][→ ]...

32
ePress the ENTER button to
accept the selection.
You can select an item here. The
selected item is shown in yellow.
rSelect an item pressing the 
or buttons. 
AFor the value adjusting items
Press the ENTER button to
display an individual adjustment
screen.
Press the  or  buttons to
adjust the setting.
You can also adjust the bar-scale
items pressing the  or 
buttons in the menu screen.
Some items can be adjusted by
pressing the or buttons.
BFor the selective items
Select the setting by pressing the
or...

33
Basic Operation
Returning a setting to
the factory default
If you press the STD (standard)
button on the remote control unit,
you can return settings to the
factory default settings. However,
the operation of this function varies
depending on which screen is being
displayed.
•When a menu screen is being
displayed
All items displayed will be returned
to their factory default settings.NOTE:
•You can also select STANDARD
from the menu screen and then
press the ENTER button.
•When an individual...

34
Using the D.ZOOM (digital zoom)
function
This function lets you enlarge the
picture.
qPress a D.ZOOM +/- button
d
The picture will then be enlarged
to 1.5 times the normal size.
wUse the  , , and 
buttons to move the enlarged
area which you want to project.
rPress the MENU button to
return to the normal screen.
NOTE:
•This function can only be used
when using the remote control
unit.
•If the type of signal being input
changes while the digital zoom
function is being used, the digital
zoom function...

35
Basic Operation
Select the item pressing the  or
buttons on the remote control
unit or the projector.
Press the  or  buttons to set
the selective items. For the value
adjusting items, press the ENTER
button to display an individual
screen, and press the  or 
buttons to adjust the setting.
Adjusting the picture
STANDARD
DYNAMIC
NATURAL
PICTURE MODE
Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is NATURAL. For rooms having
regular...

36
Color Hue Setting (color
temperature)
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
Press the  button to make the
color more vivid in tone, and press
the  button to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture. Press the  button to
make flesh tones more greenish,
and press the  button to make the
flesh tones more reddish.
BRIGHT
This adjusts the darker areas...

37
Basic Operation
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. Press the  button to
make the selected color lighter.
Press the  button to make the
selected color stronger.
Projecting sRGB-
compatible pictures
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully,...

38
Select the item pressing the or
buttons on the remote control
unit or the projector.
Press the  or  buttons, to
adjust the alternative items. For the
numerically adjustable items, press
the ENTER button to display an
individual screen, and press the 
or  buttons to adjust the setting.
Some items can be adjusted
pressing the or buttons.
Adjusting the position
When the input signal is RGB, first
press the AUTO SETUP button to
initiate automatic positioning. 
If the optimum setting is not
obtained when...

39
Basic Operation
NOTE:
•  If you press the AUTO SETUP button
after correcting the keystone distortion
manually, the automatic keystone
correction function will operate and the
corrected picture will return to its
previous incorrect condition. In addition,
if you change the input signal and press
the AUTO SETUP button, the keystone
correction may be cancelled depending
on the type of signal and the angle of tilt
of the projector. To prevent them from
happening, you can set 
“AUTO
KEYSTONE ” in the...

40
S4:3
The size of the input signal is
compressed to 75% and projected.
(This is useful for projecting a
picture with a 4:3 aspect ratio onto a
16:9 screen.)
When a 4:3
signal is being
input
d
AUTO
(S-VIDEO only)
When an S1 video signal is input to
the S-VIDEO terminal, the aspect
ratio is changed automatically to
project a 16:9 picture.
4:3
The input signal is projected without
change.
16:9
The picture is compressed to a ratio
of 16:9 and projected.
When a
squeezed
signal is being
input. (The...