Panasonic LCD Projector PT-FW430U PT-FX400U Operating Instructions

DISPLAY OPTION menu
ENGLISH - 51
Settings
CLOSED CAPTION SETTING
[Only for NTSC, 525i (480i) input]
Set the closed caption display as follows.
Press ▲▼ to select [CLOSED 
1  ) 
CAPTION SETTING].
Press the  button.
2  ) 
The [CLOSED CAPTION SETTING] screen is  
z
displayed.
Press ▲▼to select, and press ◄► to 
3  ) 
switch.
CLOSED CAPTION 
J
Displays or hides the closed caption.
Each press of the button switches the settings as 
 
z
shown below.
When you set the function to [ON], a message, 
 
z
[If the...

DISPLAY OPTION menu
52 - ENGLISH
Settings
STARTUP LOGO
Sets the logo that is projected when the power is 
turned on.
Press ▲▼ to select [STARTUP LOGO].
1  ) 
Press ◄► to switch [STARTUP LOGO]
2  ) 
The setting changes as follows each time the  
z
button is pressed.
DEFAULT LOGOTEXT
OFFUSER LOGO
DEFAULT 
LOGOThe Panasonic logo is projected
TEXT The input text is projected
USER LOGO The logo transferred by “Logo 
Transfer Software *
1 ” is projected
OFF No startup logo is projected
“Logo Transfer Software”...

DISPLAY OPTION menu
ENGLISH - 53
Settings
SIGNAL SEARCH
When the power is turned on, this function 
automatically detects the terminal to which signals are 
input and sets the projection settings.
Press ▲▼ to select [SIGNAL 
1  ) 
SEARCH].
Press ◄► to switch [SIGNAL 
2  ) 
SEARCH].
The setting changes as follows each time the  
z
button is pressed.
ONOFF
ON Enables automatic input detection.
OFF Disables automatic input detection.
Note
When the AUTO SETUP button on the remote control 
 
z
is pressed and...

DISPLAY OPTION menu
54 - ENGLISH
Settings
OTHER FUNCTIONS
 
JAUTO SETUP
See “Adjusting the display position automatically”. 
(
Æpage 33)
 
JFREEZE
You can pause the projection and mute the sound 
temporarily, regardless of the playing status of the 
connected device.
Pressing the  button cancels the 
function.
 
JAV MUTE
You can stop the projection and the sound when 
you will not be using the projector for a while.
Pressing the  button cancels the 
function.
 
JINDEX WINDOW
You can capture the projected...

DISPLAY OPTION menu
ENGLISH - 55
Settings
 
JDIGITAL ZOOM
%*(*5-
;00. 1.5
You can enlarge the center area.
You can also change the location of the area to be 
enlarged.
Pressing the  button cancels the 
function.
%*(*5-
;00.1.0%*(*5-
;00.3.0
Button functions during DIGITAL ZOOM
Pressing the ►button increases magnification
Pressing the ◄button decreases magnification
►button
◄button
After setting the magnification, press the  
button.
Pressing the ▲▼buttons moves the area to the top 
or the bottom....

56 - ENGLISH
Settings
PROJECTOR SETUP menu
Select [PROJECTOR SETUP] from the Main 
Menu (see “Navigating through the menu” on 
page 35), then select the item from the sub-
menu.After selecting the item, press ◄►▲▼ to set.
 
z
Remote ControlControl Panel
STATUS
Displays the status of the projector.
Press ▲▼ to select [STATUS].
1  ) 
Press the  button.
2  ) 
The [STATUS] screen appears. 
z
SIGNAL NAME Displays the input signal name.
SIGNAL  
FREQUENCY Displays the frequency of the 
input signal.
PROJECTOR...

PROJECTOR SETUP menu
ENGLISH - 57
Settings
PROJECTION METHOD
A projection scheme can be chosen depending on 
the installation of the projector. If the picture is shown 
upside down or in reverse, change the projection 
method.
Press ▲▼ to select [PROJECTION 
1  ) 
METHOD].
Press ◄► to switch [PROJECTION 
2  ) 
METHOD].
Each press of the button switches the settings  
z
as shown below.
FRONT/DESKFRONT/CEILING
REAR/CEILINGREAR/DESK
FRONT/DESK When mounted on a desk or stand 
in front of the screen
FRONT/...

PROJECTOR SETUP menu
58 - ENGLISH
Settings
SCHEDULE
This sets the command execution schedule for each 
day of the week.
How to enable the SCHEDULE  
J
function
Press ▲▼ to select [SCHEDULE].
1  ) 
Press ◄► to switch [SCHEDULE].
2  ) 
Each press of the button switches the settings  
z
as shown below.
ONOFF
ON Enables set SCHEDULE
OFF Disable set SCHEDULE
Note
If [SCHEDULE] is set to [ON], the setting for [STANDBY 
 
z
MODE] is automatically set to [NORMAL] and cannot be 
changed. Even if [SCHEDULE] is...

PROJECTOR SETUP menu
ENGLISH - 59
Settings
ECO MANAGEMENT
Can optimize lamp power and reduce the power 
consumption according to the application.
Press ▲▼ to select [ECO 
1  ) 
MANAGEMENT].
Press the  button.
2  ) 
The [ECO MANAGEMENT] screen is displayed. 
z
Press ▲▼ to select the item and press 
3  ) 
◄► to switch the setting.
 
JAUTO POWER SAVE
[AMBIENT LIGHT DETECTION], 
[SIGNAL
 DETECTION], and [AV MUTE DETECTION] 
functions can be used.
Note
Not available when [LAMP POWER] is set to [ECO].
 
z...

PROJECTOR SETUP menu
60 - ENGLISH
Settings
EMULATE
When using the control commands for one of our 
projectors that you have previously purchased to 
control this projector using a computer via its serial 
input terminal, set up the EMULATE function as 
follows. This will allow you to use the control software 
etc. designed for our existing projectors.
Press ▲▼ to select [EMULATE].
1  ) 
Press the  button.
2  ) 
The [EMULATE] screen appears. 
z
Press ▲▼ to select the required item.
3  ) 
Press the...