Panasonic LCD Projector PT-FW430U PT-FX400U Operating Instructions

PROJECTOR SETUP menu
ENGLISH - 61
Settings
AUDIO SETTING
Set details of Audio functions.
Press ▲▼ to select [AUDIO SETTING].
1  ) 
Press the  button.
2  ) 
[AUDIO SETTING] screen will be displayed. 
z
Use ▲▼ to select an item and use ◄► 
3  ) 
to adjust the level or switch settings.
VOLUME 
J
You can adjust the volume of the projector’s speaker 
or audio output.
Operation Adjustment Adjustment 
range
Press ► Increases volume Max. 63
Press ◄ Decreases volume Min. 0
BALANCE 
J
You can adjust the balance of...

PROJECTOR SETUP menu
62 - ENGLISH
Settings
DATE AND TIME
This lets you set the time zone and the current date 
and time for the projector’s internal clock.
 
JSetting the TIME ZONE
Press ▲▼ to select [DATE AND TIME].
1  ) 
Press the  button.
2  ) 
The [DATE AND TIME] screen will be displayed. 
z
Press ▲▼ to select [TIME ZONE].
3  ) 
Press ◄► to switch [TIME ZONE].
4  ) 
 
JAdjusting the date and time 
manually
Press ▲▼ to select [DATE AND TIME].
1  ) 
Press the  button.
2  ) 
The [DATE AND TIME] screen...

PROJECTOR SETUP menu
ENGLISH - 63
Settings
TEST PATTERN
The test patterns do not reflect position, size and 
other adjustments. Be sure to display the input signal 
before making any test pattern settings.
Press ▲▼ to select [TEST PATTERN].
1  ) 
Press the  button.
2  ) 
[TEST PATTERN] will be displayed. 
z
Press ◄► to switch test patterns.
3  ) 
You can return to [PROJECTOR SETUP] by  
z
pressing the  or  button.
Display sequence of internal test  
J
patterns
Each press of the ◄► buttons switches the...

64 - ENGLISH
Settings
SECURITY menu
Select [SECURITY] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.When you operate the projector for the first time.
 
z
Factory default password: 
Press▲►▼◄▲►▼◄ and the  
button.
After selecting the item, press ◄►▲▼ to set.
 
z
Remote ControlControl Panel
Attention
Please set the settings after you display the [SECURITY] 
 
z
screen.
When the [SECURITY] screen appears, password entry 
 
z
is required. Enter...

SECURITY menu
ENGLISH - 65
Settings
DISPLAY SETTING
You can display the security message (text and 
image) on the projected image.
Press ▲▼ to select [DISPLAY 
1  ) 
SETTING].
Press ◄► to switch [DISPLAY 
2  ) 
SETTING].
The setting will change as follows each time the  
z
button is pressed.
OFFTEXTUSER LOGO
OFF The [TEXT] / [USER LOGO] display 
is disabled.
TEXT The text display is enabled.
USER LOGO The logo transferred by “Logo 
Transfer Software *
1 ” is projected
“Logo Transfer Software” is included...

SECURITY menu
66 - ENGLISH
Settings
CONTROL DEVICE SETUP
You can enable/disable the button operations of the 
Control panel of the main unit and remote cotrol.
Press ▲▼ to select [CONTROL 
1  ) 
DEVICE SETUP].
Press the  button.
2  ) 
The [CONTROL DEVICE SETUP] screen will  
z
be displayed.
Press ▲▼ to select items and ◄► to 
3  ) 
switch settings.
If you choose [DISABLE], select [OK] and press  
z
 button in the confirmation screen 
that appears.
 
JCONTROL PANEL
Restriction of control from the main...

NETWORK
ENGLISH - 67
Settings
NETWORK
Select [NETWORK] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.After selecting the item, press ▲▼◄► to set.
 
z
Remote ControlControl Panel
Note
Set this to connect the projector to a computer via a 
 
z
network. For details of PJ Link Network, see “Operation 
Manual, Network Operations”.
When [PASSWORD] in the [SECURITY] menu is [ON], a 
 
z
password is required to initialize the network.
WIRED LAN 
J
You...

LAMP, TEMP and FILTER Indicators
68 - ENGLISH
Maintenance
LAMP, TEMP and FILTER Indicators
Managing the indicated problems
If a problem should occur inside the projector, the LAMP, TEMP and/or FILTER indicators will inform you. Manage 
the indicated problems as follow.CAUTION
Before you take a remedial measure, follow the procedure of switching th\
e power off indicated in “Powering off the 
 
z
projector”. (
Æpage 30)
If multiple indicators light or blink, verify the status of the projecto\
r by looking...

LAMP, TEMP and FILTER Indicators
ENGLISH - 69
Maintenance
 
JTEMP indicator
Indicator Lights in red while projecting. ([REFER TO THE “TEMP indicator” SECTION IN THE 
 
z
OPERATION MANUAL] appears on the screen.)
Blinking in red when the power is off. (Projection stops automatically.)
 
z
Status The internal or external temperature is abnormally high. 
Check Is the ventilating 
port (intake/exhaust)  
blocked? Is the temperature of 
the environment   too 
high?
Is [HIGH ALTITUDE MODE] properly set?
Remedy...

70 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect  
z
the power plug from the wall outlet. (Æpages 28, 30)
Be sure to observe the procedure “Powering off the projector” (
 
zÆpage 30) when performing power supply 
operation.
Maintenance
Outer Case 
J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thorou\
ghly before...