Panasonic LCD Projector PT-F200NTU PT-F200U Operating Instructions

PICTURE menu
ENGLISH - 31
Settings
You can perform more detailed image adjustment 
manually.
JFor S-VIDEO/VIDEO signals
QTV-SYSTEM
When the video signal is changed, the setting 
switches automatically. You can switch the setting 
manually to match the video data. Press I H to 
cycle through the options.
QSTILL MODE
You can reduce the vertical flicker when projecting 
a still image.
 OFF: Deactive
 ON: Active
QNOISE REDUCTION
You can switch the automatic noise reduction 
system on/off. Press I H to select...

ENGLISH - 32
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
you can correct keystone.
You can move the projected image for fine adjustment. 
Press I H to move horizontally and F G vertically. 
(Available with signals from VIDEO/S-VIDEO/
COMPUTER/COMPONENT only)If you have interference patterns of the projected image, 
which is sometimes referred to as moire or noise, you 
can minimize it by pressing I H to adjust...

POSITION menu
ENGLISH - 33
Settings
Q16:9
The squeezed signal will be projected in 16:9 ratio.
QS4:3
The input signal will be sized down 75 % and 
projected. S4:3 mode is effective when projecting 
4:3 image on to a 16:9 screen.
QAUTO
The S1 signal which contains an identifying signal 
will be detected and automatically project the 
image in proper ratio. (Available with S-VIDEO 
signals only)When the input signal resolution is lower than the 
projector resolution, it will be projected at the projector...

ENGLISH - 34
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.
You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option. STARTUP LOGO will be displayed for 
30 seconds.
 ONActive
 OFFDeactive
 USERDisplay the original text
QEditing the original text
If you select USER, you can display...

OPTION menu
ENGLISH - 35
Settings
You can set the off timer to switch off the POWER of the 
projector after a certain period of time automatically 
when no signal is detected. Press I H to select the 
required period from 15 to 60 minutes at intervals of 
5 minutes.
You can switch the projector start up status for when the 
Mains lead is connected while the MAIN POWER is on, 
or for when the MAIN POWER is switched on while the 
Mains lead is connected. Press I H to select the 
required option.
 OFFThe...

Settings
OPTION menu
ENGLISH - 36
If the input signal contains closed captions, you can turn 
on the feature and switch the channels.
 OFFDeactive
 ONActive
 CC1 - 4Change the channels from MODE
You can use the 7 different test patterns to adjust the 
focus of the image. See “Lens shift and positioning” on 
page 16. 
1. Press ENTER to display the test pattern 1.
2. Press I H to select the required test pattern.
3. Press MENU or RETURN to return to the previous 
menu, oar press repeatedly to escape the...

ENGLISH - 37
Settings
SECURITY menu
JEntering the SECURITY menu
Every time when you apply to the SECURITY 
menu, you will be asked to perform the password 
operation.
When you apply to the SECURITY menu before you 
change the password to your original, perform to input 
the following factory default password operation.
 Press F H G I F H G I and ENTER.
QAfter you change the password
When you apply to the SECURITY menu after you 
change the password to your original in the 
PASSWORD CHANGE menu, input the...

ENGLISH - 38
Settings
NETWORK menu
In NETWORK menu, the following items are available.
 WIRED LAN
 WIRELESS LAN
 NAME CHANGE
 INPUT PASSWORD
 PASSWORD CHANGE
 NETWORK STANDBY
 WEB CONTROL
 LIVE MODE CUT IN
 STATUS
 INITIALIZE
NOTE:
• The NETWORK menu is available only with 
PT-F200NTU.
• See the PJ Link or network information in the contents 
of the CD-ROM which is provided with the projector.
Remote control Control panel
 See “Navigating through the MENU” on page 27.
 See “Main menu and Sub-menu” on...

ENGLISH - 39
Maintenance
LAMP, TEMP and ARF Indicators
If a problem should occur with the projector, the LAMP, TEMP and/or 
FILTER indicators will inform you. Manage the indicated problems as 
follow.
1. Confirm the status of all indicators and projector, and switch off the 
projector in proper way.
2. Find out the cause of the problem by status of the LAMP, TEMP 
and/or FILTER indicators.
3. Follow the instruction for each indication below and solve the 
problem.
4. Turn on the projector in the correct...

ENGLISH - 40
Maintenance
Care and Replacement
JBefore cleaning the projector
 Switch off the MAIN POWER and disconnect the power plug from the wall socket.
 Unplug all the cables from the projector.
JCleaning the outer surface of the projector
Wipe off dirt and dust gently with a soft cloth.
 If it is difficult to remove the dirt, soak a cloth with water, wring the cloth well and then wipe the projector. 
Dry off the projector with dry cloth.
 Do not use petroleum benzine, thinner, any alcoholic solvent,...