Panasonic LCD Projector PT-F200NTU PT-F200U Operating Instructions

Basic Operation
Switching the projector on/off
ENGLISH - 21
1. Switch the MAIN POWER on.
 The power indicator lights up in RED.
2. Open the Front panel cover.
 This is not necessary in Remote control operation.
3. Press the POWER button.
 The power indicator lights up in GREEN after 
flashing for a while.
 The STARTUP LOGO is displayed on the screen. 
See “STARTUP LOGO” on page 34.
1. Open the Front panel cover.
 This is not necessary in Remote control operation.
2. Press the POWER button.
 The...

ENGLISH - 22
Basic Operation
Projecting an image
1. Switch on the connected devices.
 Press the play button of the required device.
2. Press the INPUT SELECT buttons to select the 
required input method if needed. See “Switching 
the input signal” on page 24.
 The image will be projected on the screen.
1. Open the Front panel cover.
2. Adjust the projected image with the Lens shift 
lever. See “Lens shift and positioning” on page 16.
3. Adjust the angle of the projector.
 Screw down the Front leg...

ENGLISH - 23
Basic Operation
Remote control operation
You can operate the projector with the Remote control 
within the remote range 15 m (492), approximately ± 
30° vertically and horizontally.
QFacing to the projector
Ensure the Remote control emitter is facing to 
the Remote control signal receptor on front/back 
of the projector and press the required buttons to 
operate.
QFacing to the screen
Ensure the Remote control emitter is facing to 
the screen and press the required buttons to 
operate the...

Basic Operation
Remote control operation
ENGLISH - 24
You can switch the input method manually by 
pressing the COMPUTER, NETWORK 
(PT-F200NTU only) and VIDEO buttons. 
Press the required button several times or I 
H to cycle through the input methods as 
follows. The actual projected image will be 
changed in a while.
 The graphical guidance will be displayed on the upper 
right of the projected image and you can confirm the 
selected input method which is highlighted in yellow. See 
“INPUT GUIDE” on...

Basic Operation
Remote control operation
ENGLISH - 25
When projecting an image, press FREEZE to 
capture the projected image and display it on 
the screen as a still picture. While the image is 
frozen, the sound will be stopped.Press the FREEZE button to return to the projection.
You can turn off the lamp and stop the 
projection temporary for electrical power save. Press the SHUTTER button to return to the projection.
You can reset most of the customized settings 
to the factory defaults by pressing...

Basic Operation
Remote control operation
ENGLISH - 26
You can enlarge the projected image down 
to a centered area for emphasizing within 
the range of 1x to 2x.
QEnlarging the image
1. Press DIGITAL ZOOM +/- once.
 The centered area of the image will then be enlarged 
to 1.5x.
2. Adjust the image size by pressing DIGITAL ZOOM 
+/-.
 The image size will be changed in steps of 0.1.
QShifting the center point
Press F G I H to shift the center point.
You can control the volume of the built-in 
speakers and...

ENGLISH - 27
Settings
Menu Navigation
The menu system allows you to access functions which do not have their own dedicated buttons on the Remote 
control. The menu options are structured and categorized. You can navigate through the menu with F G H I 
buttons.
JDisplaying the Main menu
Press the MENU button to display the Main 
menu and the operating guidance.
JAdjusting with the bar scale 
items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current...

Settings
Menu Navigation
ENGLISH - 28
The Main menu has 6 options. Select the required menu item and press ENTER to display the Sub-menu. 
Main menu and Sub-menu
NOTE:
• Some default settings vary by the selected input signal.
•Sub-menu items vary according to the selected input signal.
• Some settings are adjustable without any signals.
Main menuSub-menuOptions (underlined is default setting)Page
PICTURE PICTURE MODE NATURAL
DYNAMIC
*1
*1. Default setting for COMPUTER/NETWORK signalspage 30
STANDARD...

Menu Navigation
ENGLISH - 29
Settings
Main menuSub-menuOptions (underlined is default setting)Page
OPTION INPUT GUIDE DETAILED
SIMPLEpage 34
OFF
STARTUP LOGO ON
OFFpage 34
USER
COMPUTER2 SELECT INPUT
OUTPUTpage 34
FILTER REMAININGpage 34
LAMP RUNTIMEpage 34
POWER OFF TIMER OFF
page 35
15 MIN. 20 MIN.
25 MIN. 30 MIN.
35 MIN. 40 MIN.
45 MIN. 50 MIN.
55 MIN. 60 MIN.
DIRECT POWER ON OFF
ONpage 35
CONTROL PANEL VALID
INVALIDpage 35
AUTO SETUP AUTO
BUTTONpage 35
SIGNAL SEARCH ON
OFFpage 35
INSTALLATION...

ENGLISH - 30
Settings
PICTURE menu
Depending on the projection environment, you can use 
these preset parameter settings to optimize image 
projection. Press I H to cycle through the options.
You can adjust the contrast of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.
You can adjust the brightness of the projected image.You can adjust the color saturation of the projected 
image. (Available with signals from VIDEO/S-VIDEO/
COMPONENT only)
You can adjust the skin tone in the...