Panasonic Kx Tva50 Feature Manual

Programming Manual References2.7.8  Custom Service Report
2.4.4  Custom Service
Manager’s Manual References 3.6  Recording Messages
2.2.17  Daylight Saving Time Assignment
Description Adjusts the VPS’s clock on the preprogrammed days for Daylight Saving Time. Both a start and end date for
Daylight Saving Time must be programmed.
Programming Manual References "Daylight Saving Time" in 2.5.4.1  Time Setting
2.2.18  Dialing by Name
Description Allows the caller to be connected to the desired...

Conditions•Company Greetings are not be played for callers when calls are routed by this feature.
• This feature is only available for the following PBXs using DPT Integration.
– KX-TD816 (P311Q or higher)
– KX-TD1232 (P211Q or higher)
– KX-TD500 (V4M or higher)
– KX-TDE series
– KX-TDA series *1
 (MPR Version 1.1 or higher)
*1 except KX-TDA50
Programming Manual References 2.4.1  Caller ID/DID/PIN Call Routing
2.2.20  E-mail Integration
Description Enables subscribers (including the message manager) to...

Subscriber’s Manual References5.9  E-mail Integration (Message Notification by E-mail)
2.2.21  Extension Group
Description An Extension Group is a group of extensions that share a common mailbox. Extension Groups are created by
the System Administrator. Each group has an Extension Group number. There are 20 group lists available,
and each group list can have a maximum of 100 members.
Programming Manual References 2.5.2  Extension Group
2.2.22  Fax Management
Description Allows the VPS to automatically...

Conditions•Holidays cannot overlap.
Programming Manual References 2.4.2  Holiday Settings
2.2.25  Intercom Paging (APT/DPT Integration Only)
Description Allows callers to page subscribers by PBX paging (there are different kinds of PBX paging, and these can be
specified by VPS programming) when the subscribers have set Intercom Paging for Call Transfer or when the
subscribers have set Intercom Paging for Incomplete Call Handling. The caller is briefly placed on hold while
the VPS announces the page and...

Callers will reach an interview mailbox when:
a. The Incoming Call Service of a trunk or port is set to "Interview Mailbox" (see "Incoming Call Service" in
2.3.1.1  Call Service in the Programming Manual).
b. The call service of a Holiday is set to "Interview Mailbox" (see "Service" in 2.4.2.1  Holiday Service No. in
the Programming Manual).
c. A Custom Service or Personal Custom Service option is set to transfer callers to an interview mailbox (see
2.1.8  Personal Custom...

2.2.28  Logical Extension (All Calls Transfer to Mailbox)
Description Is an extension that always receives calls directly into its mailbox. This feature is used by subscribers that are
often unavailable or that do not have a telephone.
Programming Manual References "All Calls Transfer to Mailbox" in 2.1.3  Mailbox Parameters
Manager’s Manual References 2.2  Setting Up Mailboxes
2.2.29  Mailbox Groups
Description See 2.3.13  Group Distribution List—System.
Feature Manual References 2.3.13  Group...

Feature Manual References2.2.26  Interview Service
2.2.28  Logical Extension (All Calls Transfer to Mailbox)
Subscriber’s Manual References 5.5  Message Reception Mode
2.2.32  Message Waiting Notification—Device
Description Automatically calls a preprogrammed telephone number or beeper number when a subscriber has new
messages. New messages will be automatically played back when the subscriber answers the call. When a
beeper is called, the subscriber must call the VPS and log in to his or her mailbox to...

2.2.33  Message Waiting Notification—Lamp
Description Automatically lights the message waiting lamp on the subscribers’ telephones when subscribers have new
messages. When a proprietary telephone with display is used, the number of unplayed messages will be
displayed when the message waiting lamp is lit.
Conditions •In order to display the number of unplayed messages on the display:
– A compatible Panasonic Proprietary Telephone with 6-line display (such as the KX-T7636) must be
used.
– The VPS must be...

2.2.35  No Answer Coverage Mode
Description Determines how calls will be handled when an operator does not answer within the time specified for  "Operator
No Answer Time". One of the following can be set for each operator, unless otherwise noted.
Caller Select : Callers may leave a message or call another extension.
Leave Message : Callers may leave a message in the operator’s mailbox.
Disconnect Message : Callers are disconnected from the VPS after hearing "Thank you for calling."
Next...

a.A caller does not or cannot send any DTMF signals to the VPS (i.e., the caller does not dial any digits or
has a rotary telephone).
b. A caller dials "0" when the call is being handled by Automated Attendant service.
c. A Custom Service or Personal Custom Service option is set to transfer callers to Automated Attendant
service (see 2.1.8  Personal Custom Service or 2.4.4  Custom Service in the  Programming Manual). After
pressing the appropriate dial key, the caller is directed to an operator....