Panasonic Kx Th102 Operating Instructions Manual

Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp71
Switching a cellular call 
between a cellular phone and 
the base unit o
From a cellular phone to the base unit
If you answer a cellular call using a cellular 
phone, you can transfer it to the base unit.
1During a cellular call using your cellular 
phone, press {CELLULAR}.
2“Transfer to base” i {SET}
3Select the desired cellular phone. i 
{SET}
LIf you registered only one cellular 
phone, skip to step...

Using a Cellular Phone with this Unit
72For assistance, please visit http://www.panasonic.com/phonehelp
LTo hang up only one line, press the 
desired line button or {CELLULAR} 
for the party with which you want to 
continue talking.
LTo put both lines on hold, press 
{HOLD}. To talk with only land line 
caller, press the desired line button. 
To talk only with the cellular caller, 
press {CELLULAR}. To resume both 
lines, press {CONF}.
Conference call with a cellular 
call and an intercom call 
Yo
While...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp73
Connecting to your network
By connecting the base unit to your LAN, you can use this unit to:
– connect to the Internet (requires a high-speed Internet service subscription).
– connect to a computer on the same network.
Connecting to your LAN
Connect the base unit using LAN cable.
Note:
LRefer to the included “Installation Guide for MULTI TALK V Software” for connections.
LWhen connecting the MULTI TALK V devices to a...

Useful Information
74For assistance, please visit http://www.panasonic.com/phonehelp
System requirements for your computer
The following system requirements must be met in order to use the MULTI TALK V 
software.
Trademarks
LMicrosoft and Windows are either registered trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.
LPentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in 
the United States and/or other countries.
LScreen...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp75
Wall mounting
Base unit
The base unit can be mounted on a wall phone plate.
1Tuck the telephone line cord inside the wall mounting adaptor.
2Insert the upper hooks (A), then the lower hooks (B) on the wall mounting adaptor into 
the holes on the base unit until it clicks into the place.
3Connect the telephone line cord. Mount the base unit by inserting the mounting pins 
into the round openings on the adaptor (for pin B,...

Useful Information
76For assistance, please visit http://www.panasonic.com/phonehelp
Charger
The charger can be mounted on the wall.
Drive the screws (not included) into the 
wall using the wall template as a guide, 
then mount the charger securely on the 
screws.
Connect the AC adaptor to power outlet 
(page 16).
Note:
LMake sure the screws are securely 
fastened to the wall.Belt clip
You can hang the handset on your belt or 
pocket using the included belt clip.
To attach the belt clip
To remove the...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp77
Headset (Optional)
Setting up a Bluetooth wireless 
headset o
If your headset is Bluetooth wireless 
technology compatible to the home 
communication system, you can have a 
hands-free phone conversation by 
registering your headset to the base unit.
Important:
LThe following procedures must be 
performed using the base unit.
LThere can only be one active Bluetooth 
headset connection at a time.
Registering a headset...

Useful Information
78For assistance, please visit http://www.panasonic.com/phonehelp
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display messageCause & solution
BusyLThe called handset or base unit is in use.
LOther users are using the line(s). Wait until the line 
button light or the line status icon goes out.
LPrivacy mode is on for the call you tried to join (page 
44).
LThe handset or base unit you tried to copy phonebook 
items to is in use....

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp79
No link to base. 
Move closer to base 
and try again.LThe handset has lost communication with the base unit. 
Move closer to the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged in.
LRaise the base unit antennas.
LThe handset’s registration may have been canceled. 
Re-register the handset (page 54).
LAfter registering a cellular phone to the base unit, the 
communication between the base unit...

Useful Information
80For assistance, please visit http://www.panasonic.com/phonehelp
Troubleshooting
General use
Programmable settings
ProblemCause & solution
The unit does not work.LMake sure that the battery is installed correctly and fully 
charged (page 16).
LCheck the connections (page 13 – 15).
LUnplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
LThe handset has not been registered to the base unit. 
Register the handset (page 54).
I cannot hear a dial...