Panasonic Kx Th102 Operating Instructions Manual

Intercom
For assistance, please visit http://www.panasonic.com/phonehelp41
Transferring a call
Outside calls can be transferred between 
the handset and the base unit, and 
between the handset and a compatible 
Panasonic unit (KX-THA11/KX-THA12/
KX-THA16/KX-THA17).
Transferring calls Yo
1During an outside call, press 
{INTERCOM} to put the call on hold.
2To page the base unit, press {0}.
To page another handset, enter its 
extension number ({1} to {8}).
LIf you do not wish to announce the 
transfer, skip...

Intercom
42For assistance, please visit http://www.panasonic.com/phonehelp
Transferring a call to the 
answering system 
Yo
When you answer a call and the caller 
wants to talk to someone who is not 
available, you can transfer the caller to the 
answering system, where the caller can 
leave a message.
Tell the outside caller you will transfer him 
or her to the answering system.
1During an outside call, press 
{INTERCOM} to put the call on hold.
2Press {9} to hang up the call.
1During an outside call,...

Intercom
For assistance, please visit http://www.panasonic.com/phonehelp43
press {LINE1} or {LINE2}. To 
resume both lines, press {CONF}.
Note for handset and base unit:
LMultiple parties can join a conference 
call. The possible number of 
participating parties depends on the 
resources available for wireless 
communication. When another 
participating party cannot join a 
conversation, “System is busy. 
Please try again later.” is 
displayed.
Conference call with an outside 
call and an intercom call...

Intercom
44For assistance, please visit http://www.panasonic.com/phonehelp
Call share
This feature allows the handset or base 
unit to join an existing outside call.
Joining a conversation Yo
Join the conversation by pressing {LINE1} 
or {LINE2} to select the line that is being 
used by another extension for an outside 
call.
L“Conference” is displayed.
Join the conversation by pressing {LINE1} 
or {LINE2} to select the line that is being 
used by another extension for an outside 
call.
L“Conference” is...

F Monitoring
For assistance, please visit http://www.panasonic.com/phonehelp45
Monitoring feature
This feature allows you to monitor the 
room where a unit is located. The 
monitored unit does not ring, allowing you 
to easily monitor a baby’s room, for 
example, from different areas of the 
house.
Note:
LYou can place the handset on the 
charger while monitoring using the 
speakerphone.
Enabling monitoring access 
Yo
To use the monitoring feature, you need to 
set the destination unit to be monitored...

Programmable Settings
46For assistance, please visit http://www.panasonic.com/phonehelp
Ringer settings
Important:
LMany of the following features can be 
programmed using the MULTI TALK V 
USB Utility. Refer to the help section of 
the MULTI TALK V USB Utility application 
for more information (page 4).
Ringer volume Yo
1{MENU} (center of joystick) i f 
i {SELECT}
2“Ringer volume” i {SELECT}
3Select the desired line.
4Select the desired volume. (Default: 
High)
LTo turn the ringer off, push {V}...

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp47
LThe preset song “Melody 1” in this 
product is used with the permission of © 
2005 Speed Crazy.
LThe preset songs “Tone 4”, “Tone 5”, 
and “Melody 2” in this product are used 
with the permission of © 2005 M-
ZoNE Co., Ltd.
1{MENU} i f i {SET}
2“Ringer tone” i {SET}
3Select the desired line.
4Select the desired item. (Default: Line 
1: “Tone 1”, Line 2: “Tone 2”) i 
{SET} i {STOP}
Recording songs from an audio...

Programmable Settings
48For assistance, please visit http://www.panasonic.com/phonehelp
Playing back a song
1{MENU} (center of joystick) i f 
i {SELECT}
2“Customize ring” i {SELECT}
3“Playback” i {SELECT}
4Select the desired song. i {PLAY}
5{STOP} i {OFF}
Erasing a song
While the song is selected or playing, 
press {ERASE}, then press {YES}.
Note:
LIf the erased song was used for the 
handset ringer tone (page 46), “Tone 1” 
or “Tone 2” (default) is used instead of 
that song.
LIf the erased song was...

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp49
Other settings
Time adjustment (Caller ID 
subscribers only) 
Yo
This feature allows the unit to 
automatically adjust the date and time 
setting when caller information is received. 
To turn this feature on, select “Caller 
ID[auto]”. To turn this feature off, select 
“Manual”.
LYou only need to program this setting 
once, using either the handset or base 
unit.
Important:
LTo use this feature, set the date and time...

Programmable Settings
50For assistance, please visit http://www.panasonic.com/phonehelp
Handset Talking Caller ID Y
You can turn the Talking Caller ID feature 
on or off for the handset.
1{MENU} (center of joystick) i h i 
{SELECT}
2“Talking CallerID” i {SELECT}
3Select the desired setting. (Default: 
“On”) i {SAVE} i {OFF}
Display contrast Yo
1{MENU} (center of joystick) i h i 
{SELECT}
2“LCD contrast” i {SELECT}
3Select the desired setting. (Default: 
Level 3) i {SAVE} i {OFF}
1{MENU} i h i {SET}
2“LCD...