Panasonic Kx Tge260 Operating Instructions Manual
Have a look at the manual Panasonic Kx Tge260 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
only mode (If you do not use the landline)”, p age 20. Cellular line selection T his feature determines which cellular line is selected to make cellular calls when: – you press MCELL N on the handset. – you press M N or MZ N on the handset while the cellular line only mode is turned on. – you press MZ N on the base unit while the cellular line only mode is turned on. (KX-TGE270 series: page 3) The following settings are available: – “Manual ” (handset only: default): You can select the desired cellular line when making a call. – “Cellphone 1 ”*1 (base unit default): CELL 1 is selected. – “Cellphone 2 ”*1 : CELL 2 is selected. 1 For handset: MMENU N#634 For base unit *2 : MMENU N#*634 2 Mb N: Select the desired setting. 3 MSAVE N a M OFF N *1 After the Bluetooth device is paired, the device name is displayed. *2 KX-TGE270 series: page 3 Storing your area code (for d ialing only a 7-digit phone number to make a local call) You need to add your area code when making cellular calls to a phone number in your area. Once you store your area code, it is automatically added to the beginning of the 7-digit phone number when making cellular calls. 1 MMENU N#633 2 Enter the 3-digit area code. RTo correct a digit, press MCLEAR N. 3 MSAVE N a M OFF N Changing the Bluetooth PIN ( Personal Identification Number) The PIN is used to pair cellular phones to the base unit. The default PIN is “0000 ”. To prevent unauthorized access to this product, we recommend that you change the PIN, and keep it confidential. Important: R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, see page 75. 1 MMENU N#619 R If the unit prompts you to enter the old PIN (when the default has been changed), enter the current 4-digit PIN. 2 Enter the new 4-digit PIN. a M OK N 3 Enter the new 4-digit PIN again. a M SAVE N 4 MOFF N For assistance, please visit http://www.panasonic.com/help 21 Link to Cell TGE26x_27x(en)_0123_ver110.pdf 212015/01/23 9:57:41
Making cellular calls I mportant: R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Before making calls, confirm that the corresponding CELL indicator on the base unit lights up (page 15). 1 Lift the handset and dial the phone number. RTo correct a digit, press MCLEAR N. 2 MCELL N R The unit starts dialing when: – only 1 cellular phone is paired. – a specific line is set to make cellular calls (page 21). Go to step 4. 3 Mb N: Select the desired cellular phone. a M SELECT N 4 When you finish talking, press MOFF N or place the handset on the base unit or charger. Note: R To switch to the speaker, press MZ N. To switch back to the receiver, press MZ N/ M N . Adjusting the receiver or speaker v olume Press Mj N or Mk N repeatedly while talking. Making a cellular call using the redial l ist The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.). 1 ME N REDIAL 2 Mb N: Select the desired phone number. 3 MCELL N R The unit starts dialing when: – only 1 cellular phone is paired. – a specific line is set to make cellular c alls (page 21). 4 Mb N: Select the desired cellular phone. a M SELECT N Erasing a number in the redial list n W hen a cellular phone is paired: 1 ME N REDIAL 2 Mb N: Select the desired phone number. a M MENU N 3 Mb N: “Erase ” a M SELECT N 4 Mb N: “Yes ” a M SELECT N 5 MOFF N n When a cellular phone is not paired: 1 ME N REDIAL 2 Mb N: Select the desired phone number. a M ERASE N 3 Mb N: “Yes ” a M SELECT N 4 MOFF N Making landline calls 1 L ift the handset and dial the phone number. R To correct a digit, press MCLEAR N. 2 M N 3 W hen you finish talking, press MOFF N or place the handset on the base unit or charger. Using the speakerphone 1 D ial the phone number and press MZ N. 2 When you finish talking, press MOFF N. Note: R To switch back to the receiver, press MZ N/ M N . Making a call using the redial list T he last 5 phone numbers dialed are stored in the redial list (each 48 digits max.). 1 ME N REDIAL 22 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls Using the Handset TGE26x_27x(en)_0123_ver110.pdf 222015/01/23 9:57:41
2 Mb N: Select the desired phone number. 3 M N Pause (for PBX/long distance service u sers) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 35). Example: If you need to dial the line access number “9” when making outside calls with a PBX: 1 9 a M D N (Pause) 2 Dial the phone number. a M N N ote: R A 3.5 second pause is inserted each time MD N (Pause) is pressed. Answering calls W hen a call is being received, the ringer indicator and indicator flash rapidly. 1 L ift the handset and press M N or MZ N when the unit rings. R To answer a cellular call, you can also press MCELL N. 2 When you finish talking, press MOFF N or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 43). Temporary handset ringer off: You can turn the ringer off temporarily by pressing M N . Using the Smart function key W hen the indicator flashes rapidly, press M N . R Y ou can answer the call even if the handset is placed on the base unit or charger (page 16). You can finish talking by pressing MO FFN without lifting up the handset. Adjusting the handset ringer volume P ress Mj N or Mk N repeatedly to select the desired volume while ringing. Useful features during a c all Hold 1 P ress MMENU N during an outside call. 2 Mb N: “Hold ” a M SELECT N 3 To release hold on the cellular line: Press MCELL N.*1 R Another handset user can take the call by pressing MCELL N.*1 *1 If you press MCELL N and the selection list is displayed, select the desired cellular line and press M SELECT N. R The base unit user can take the call by pressing MCELL 1 N or MCELL 2 N. (KX-TGE270 series: page 3) To release hold on the landline: Press M N . R A nother handset user can take the call by pressing M N . R T he base unit user can take the call by pressing MZ N. (KX-TGE270 series: page 3) Note: R After holding for 10 minutes, the call is disconnected. Mute 1 P ress MMUTE N during a call. 2 To return to the call, press MMUTE N. Note: R M MUTE N is a soft key visible on the display during a call. For assistance, please visit http://www.panasonic.com/help 23Making/Answering Calls Using the Handset TGE26x_27x(en)_0123_ver110.pdf 232015/01/23 9:57:41
Flash for landline calls M F LASH N allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note: R To change the flash time, see page 43. For call waiting or Call Waiting C aller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your service provider/telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller’s information is displayed after you hear the call waiting tone on the handset. 1 Press MCALL WAIT N to answer the 2nd call. 2 To switch between calls, press MCALL WAIT N. Note: R Please contact your service provider/ telephone company for details and availability of this service in your area. Temporary tone dialing for l andline calls (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster T his feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is d isplayed. However, during a cellular call, is not displayed even though the f eature is activated. Handset noise reduction T his feature allows you to hear the voice of the person you are talking to clearly, by reducing the surrounding noise coming from the other party’s telephone. Press M N to turn on/off while talking. Note: R Depending on the environment where this handset is being used, this feature may not be effective. R This feature is not available using the speakerphone. Handset equalizer T his feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. 1 Press MMENU N while talking. 2 Mb N: “Equalizer ” a M SELECT N 3 Mb N: Select the desired setting. 4 Press MOK N to exit. Note: R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the speakerphone. R When both the “Equalizer ” setting and noise reduction are activated, is s hown on the display. Call share Y ou can join an existing outside call. n While another unit is on a cellular call: 1 To join the conversation, press MCELL N. R You can join the conversation when: – only 1 cellular phone is paired. 24 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls Using the Handset TGE26x_27x(en)_0123_ver110.pdf 242015/01/23 9:57:42
– a specific line is set to make c ellular calls (page 21). 2 Mb N: Select the desired cellular phone. a M SELECT N n While another unit is on a landline call: To join the conversation, press M N . N ote: R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 43). Transferring calls, conference c alls Outside calls can be transferred or a conference call with an outside party can be made between 2 handsets. 1 During an outside call, press MMENU N. 2 Mb N: “Intercom ” a M SELECT N 3 Mb N: Select the desired unit. a M SELECT N 4 Wait for the paged party to answer. RIf the paged party does not answer, press M N to return to the outside call. 5 To complete the transfer: Press MOFF N. To establish a conference call: M MENU N a M b N: “Conference ” a M SELECT N R To leave the conference, press MOFF N. The other 2 parties can continue the conversation. R To put the outside call on hold: MMENU N a M b N: “Hold ” a M SELECT N To resume the conference: MMENU N a M b N: “Conference ” a M SELECT N R To cancel the conference: MMENU N a M b N: “Stop conference ” a M SELECT N You can continue the conversation with the outside caller. Transferring a cellular call b etween the handset and a cellular phone Transferring a cellular call from the h andset to a cellular phone 1 Press MMENU N during a cellular call. 2 Mb N: “Transfer to cell ” a M SELECT N R The cellular call is transferred to the cellular phone. Note: R Depending on your cellular phone type, you may need to set the cellular phone to be ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. Transferring a cellular call from a c ellular phone to the handset During a conversation using a cellular phone, the call cannot be transferred to the handset by the cellular phone. Perform the following with the handset. 1 During a conversation using a cellular phone, press MCELL N. R The call is transferred to the handset when: – only 1 cellular phone is paired. – a specific line is set to make cellular calls (page 21). 2 Mb N: Select the desired cellular phone. a M SELECT N R The call is transferred to the handset. Answering a 2nd call I f you receive a call while talking on the phone, the interrupt tone sounds (page 41) and the 2nd caller’s information is displayed if you subscribe to Caller ID (page 49). Answering a 2nd call during a l andline call 1 Press MMENU N during a landline call. For assistance, please visit http://www.panasonic.com/help 25Making/Answering Calls Using the Handset TGE26x_27x(en)_0123_ver110.pdf 252015/01/23 9:57:42
2 Mb N: “Hold ” a M SELECT N 3 To answer the 2nd call: Press MCELL N while the 2nd call is being received. 4 To hang up the 2nd call and return to the 1st call (landline call), press MOFF N, then press M N . Answering a 2nd call during a cellular c all 1 Press MMENU N during a cellular call. 2 Mb N: “Hold ” a M SELECT N 3 To answer the 2nd call: Press M N or MCELL N while the 2nd call is being received. 4 To hang up the 2nd call and return to the 1st call (cellular call), press MOFF N, then press MCELL N*1 . *1 If you press MCELL N and the selection list is displayed, select the desired cellular line and press MSELECT N. Power back-up operation f or landline When a power failure occurs, the charged handset temporarily supplies power to the base unit (power back-up mode). This allows you to make and receive landline calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and phonebook are available only when using a handset other than the handset supplying power to the base unit. You can program “ Power failure ” and the default setting is “ Auto ” (page 43). Important: R If a handset is not placed on the base unit when a power failure occurs, “Base no power Press OFF ” is displayed. After pressing MOFF N on the handset, place it on the base unit to start power back-up mode. R P ower back-up mode will not work if the battery level of the power supplying handset is or . R D o not lift the power supplying handset from the base unit during power back-up mode. Panasonic Ni-MH battery p erformance (supplied batteries) during power back-up mode When the batteries are fully charged, operating time of the handset in power back-up mode varies depending on usage. – Continuous use of the handset in power back-up mode: 1.5 hours max. – Continuous use of the handset other than a handset in power back-up mode: 2 hours max. – Not in use in power back-up mode: 2 hours max. Making calls during a power f ailure n When only 1 handset is registered: 1 Lift the handset and dial the phone number. 2 Within 1 minute, place the handset on the base unit. RWait until speakerphone is turned on automatically and the call is made. 3 When the other party answers the call, keep the handset on the base unit and talk using the speakerphone. 4 When you finish talking, press MOFF N. n When 2 or more handsets are registered: You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Note: R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. 26 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls Using the Handset TGE26x_27x(en)_0123_ver110.pdf 262015/01/23 9:57:42
Making a call using the redial list n W hen only 1 handset is registered: 1 Lift the handset. 2 ME N REDIAL 3 Mb N: Select the desired phone number. 4 Within 1 minute, place the handset on the base unit. RWait until speakerphone is turned on automatically and the call is made. n When 2 or more handsets are registered: You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Making a call using the phonebook T here must be at least 2 handsets registered to the base unit in order for the phonebook feature to be used during a power failure. You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Answering calls during a power f ailure n When only 1 handset is registered: 1 When the unit rings, keep the handset on the base unit and press M N or M Z N. R Speakerphone is turned on. 2 When you finish talking, press MOFF N. n When 2 or more handsets are registered: When the unit rings, use a handset which is not supplying power to the base unit. R Do not use or lift the handset which is placed on the base unit during power back-up mode. Note: R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. For assistance, please visit http://www.panasonic.com/help 27Making/Answering Calls Using the Handset TGE26x_27x(en)_0123_ver110.pdf 272015/01/23 9:57:42
Making cellular calls Available for: K X-TGE270 series (page 3) 1 P ress MCELL 1 N or MCELL 2 N. 2 Dial the phone number. 3 When the other party answers, speak into the microphone. 4 When you finish talking, press MZ N. Note: R For best performance, use the speakerphone in a quiet environment. R While on a call, you can switch from the base unit to the handset: – With the call sharing mode on (page 43), press MCELL N*1 on the handset. a M b N: Select the desired cellular phone. a M SELECT N a Press M Z N on the base unit. – If the handset is on the base unit, simply lift it. *1 The call is taken when: – only 1 cellular phone is paired. – a specific line is set to make cellularcalls (page 21). Adjusting the speaker volume P ress Mj N or Mk N repeatedly while talking. Redialing the last number dialed 1 P ress MCELL 1 N or MCELL 2 N. 2 MREDIAL NMaking landline calls 1 MZ N 2 D ial the phone number. 3 When the other party answers, speak into the microphone. 4 When you finish talking, press MZ N. Note: R W hile on a call, you can switch from the base unit to the handset: – Press M N on the handset, then press M Z N on the base unit with the call sharing mode on (page 43). – If the handset is on the base unit, simply lift it. Redialing the last number dialed M Z N a M R EDIALN Pause (for PBX/long distance service u sers) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 35). Example: If you need to dial the line access number “9” when making outside calls with a PBX: 1 MZ N 2 9 a M PAUSE N 3 Dial the phone number. Note: R A 3.5 second pause is inserted each time MPAUSE N is pressed. Answering calls W hen a landline call is being received, the SP-PHONE indicator flashes rapidly. When a cellular call is being received, the CELL indicator and SP-PHONE indicator flash rapidly. 1 Press MZ N when the unit rings. R You can also answer the cellular call by pressing MCELL 1 N or MCELL 2 N. 2 Speak into the microphone. 3 When you finish talking, press MZ N. 28 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls Using the Base Unit TGE26x_27x(en)_0123_ver110.pdf 282015/01/23 9:57:42
Adjusting the base unit ringer volume P ress Mj N or Mk N repeatedly to select the desired volume while ringing. R To turn the ringer off, press and hold Mk N until the unit beeps. Useful features during a c all Hold 1 P ress MHOLD N during an outside call. 2 To release hold on the cellular line: Press MCELL 1 N or MCELL 2 N. R A handset user can take the call: MCELL N*1 a M SELECT N *1 The call is taken when: – only 1 cellular phone is paired. – a specific line is set to makecellular calls (page 21). To release hold on the landline: Press MZ N. R A handset user can take the call by pressing M N . N ote: R While a landline call is on hold, the SP-PHONE indicator flashes. R After holding for 10 minutes, the call is disconnected. Mute 1 P ress MMUTE N during a call. R The SP-PHONE indicator flashes. 2 To return to the call, press MMUTE N. Flash for landline calls M F LASH N allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note: R To change the flash time, see page 43. For call waiting service users T o use call waiting, you must first subscribe with your service provider/telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. 1 Press MCALL WAIT N to answer the 2nd call. 2 To switch between calls, press MCALL WAIT N. Note: R Please contact your service provider/ telephone company for details and availability of this service in your area. Temporary tone dialing for l andline calls (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Call share Y ou can join an existing outside call. To select the line that is being used for the call: – for a cellular line press MCELL 1 N or MCELL 2 N. – for the landline press MZ N. Note: R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 43). Transferring calls, conference c alls Outside calls can be transferred or a conference call with an outside party can be made between a handset and the base unit. For assistance, please visit http://www.panasonic.com/help 29Making/Answering Calls Using the Base Unit TGE26x_27x(en)_0123_ver110.pdf 292015/01/23 9:57:42
1 During an outside call, press MINTERCOM N. When 2 or more handsets are registered: – To page a specific handset, enter the handset number. – To page all handsets, press 0 or wait for a few seconds. 2 Wait for the paged party to answer. RIf paged party does not answer, press MINTERCOM N to return to the outside call. 3 To complete the transfer: Press MZ N. R The outside call is being routed to the handset. To establish a conference call: Press MCONF N. R To leave the conference, press MZ N. The other 2 parties can continue the conversation. R To put the outside call on hold, press MHOLD N. To resume the conference, press MCONF N. Transferring a cellular call b etween the base unit and a cellular phone Transferring a cellular call from the b ase unit to a cellular phone During a cellular call, press and hold MCELL 1 N or MCELL 2 N until the SP-PHONE indicator goes out. R The cellular call is transferred to the cellular phone. Transferring a cellular call from a c ellular phone to the base unit During a conversation using a cellular phone, press MCELL 1 N or MCELL 2 N. R The cellular call is transferred to the base unit. Answering a 2nd call I f you receive a call while talking on the phone, the interrupt tone sounds (page 41). Answering a 2nd call during a l andline call 1 Press MHOLD N during a landline call. 2 To answer the 2nd call: Press MCELL 1 N or MCELL 2 N. 3 To hang up the 2nd call and return to the 1st call (landline call), press MZ N 2 times. Answering a 2nd call during a cellular c all 1 Press MHOLD N during a cellular call. 2 To answer the 2nd call: MZ N, MCELL 1 N, or MCELL 2 N 3 To hang up the 2nd call and return to the 1st call (cellular call), press MZ N, then press MCELL 1 N or MCELL 2 N. 30 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls Using the Base Unit TGE26x_27x(en)_0123_ver110.pdf 302015/01/23 9:57:42