Panasonic Kx Tge260 Operating Instructions Manual

only mode (If you do not use the landline)”,
p
age 20. Cellular line selection
T
 his feature determines which cellular line is
selected to make cellular calls when:
– you press  MCELL N on the handset.
– you press  M N
 
or  MZ N on the handset
while the cellular line only mode is turned
on.
– you press  MZ N on the base unit while the
cellular line only mode is turned on.
(KX-TGE270 series: page 3)
The following settings are available:
– “Manual ” (handset only: default): You can
select the desired...

Making cellular calls
I mportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 15).
1 Lift the handset and dial the phone
number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The...

2
Mb N: Select the desired phone number.
3 M N
Pause (for PBX/long distance service
u
 sers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 35).
Example:  If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a  M D N (Pause)
2 Dial the phone number.  a M N
N

ote:
R A 3.5 second pause is inserted each time
MD N (Pause) is pressed....

Flash for landline calls
M F
LASH N allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 43. For call waiting or Call Waiting
C
 aller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call...

– a specific line is set to make
c ellular calls (page 21).
2 Mb N: Select the desired cellular phone.
a  M SELECT N
n While another unit is on a landline call:
To join the conversation, press  M N
.
N

ote:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.  (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 43). Transferring calls, conference
c
 alls
Outside calls can be...

2
Mb N:  “Hold ” a  M SELECT N
3 To answer the 2nd call:
Press  MCELL N while the 2nd call is being
received.
4 To hang up the 2nd call and return to the
1st call (landline call), press  MOFF N, then
press  M N
. Answering a 2nd call during a cellular
c

all
1 Press  MMENU N during a cellular call.
2 Mb N:  “Hold ” a  M SELECT N
3 To answer the 2nd call:
Press  M N
 
or  MCELL N while the 2nd call
is being received.
4 To hang up the 2nd call and return to the
1st call (cellular call), press  MOFF N,...

Making a call using the redial list
n
W
hen only 1 handset is registered:
1 Lift the handset.
2 ME N REDIAL
3 Mb N: Select the desired phone number.
4 Within 1 minute, place the handset on
the base unit.
RWait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. Making a call using the phonebook
T

here must be at least 2 handsets...

Making cellular calls
Available for:
K X-TGE270 series (page 3) 1
P
ress  MCELL 1 N or  MCELL 2 N.
2 Dial the phone number.
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press  MZ N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 43), press  MCELL N*1
 on the
handset.  a M b N: Select the desired
cellular phone.  a M SELECT N a...

Adjusting the base unit ringer volume
P ress  Mj N or  Mk N repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold  Mk N
until the unit beeps. Useful features during a
c

all Hold
1 P

ress MHOLD N during an outside call.
2 To release hold on the cellular line:
Press  MCELL 1 N or  MCELL 2 N.
R A handset user can take the call:
MCELL N*1
 a  M SELECT N
*1 The call is taken when: – only 1 cellular phone is paired.
– a specific line is set to makecellular calls...

1
During an outside call, press
MINTERCOM N.
When 2 or more handsets are
registered:
– To page a specific handset, enter the handset number.
– To page all handsets, press  0 or wait
for a few seconds.
2 Wait for the paged party to answer.
RIf paged party does not answer, press
MINTERCOM N to return to the outside
call.
3 To complete the transfer:
Press  MZ N.
R The outside call is being routed to the
handset.
To establish a conference call:
Press  MCONF N.
R To leave the conference, press  MZ N.
The...