Panasonic Kx Tg5055 Operating Instructions Manual

Answering System Preparation
41For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Belt Clip 
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip 
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories...

42
Wall Mounting
This unit can be mounted on a wall phone plate.
1Connect the AC adaptor. 
2Tuck the telephone line cord inside the wall mounting adaptor (A). 
Connect the telephone line cord (B).
3Insert the hooks on the wall mounting adaptor into the holes (A) and 
(
B) on the base unit.
To  P o w e r  
Outlet 
1
2
A
BAB
TG5055.fm.fm  Page 42  Tuesday, January 20, 2004  5:29 PM 

Useful Information
Answering System Preparation
43
Wall Mounting
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
4Adjust the adaptor to hold the base unit, then push it in the direction of 
the arrow until it clicks into place.
5Connect the telephone line cord. Mount the unit, then slide it down.
•Raise the antennas.
6To charge the handset battery:
Place the handset on the base unit.
•The unit beeps once and the CHARGE indicator lights.
TG5055.fm.fm  Page 43  Tuesday, January 20, 2004...

Wall Mounting
44
To remove the wall mounting adaptor
While pushing down the RELEASE LEVERS (A), remove the adaptor (B).
2
11
RELEASE
LEVERS
TG5055.fm.fm  Page 44  Tuesday, January 20, 2004  5:29 PM 

Answering System Preparation
45For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Direct Commands
 
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], and [#]) instead of using the soft keys.
During programming:
When “
  ” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
•If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
•...

46
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display messageCause & Remedy
Recharge battery•The battery needs to be charged. Recharge the 
battery (p. 11).
Charge for 6 HRS•The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 10).
No link to base. 
Move closer to 
base and try 
again.•The handset has lost communication with the base 
unit. Walk closer to the base unit and try again or re-
register...

Answering System
Preparation
47For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 46) for the Cause & Remedy.
Problem Cause & Remedy
“
No link to base.
Move closer to         
base and try                
again. ” is displayed and an 
alarm tone sounds. •
You are too far form the base unit. Walk 
closer to the base unit, and try again.
• Confirm the base...

Troubleshooting
48
You cannot redial.•If the last number dialed was more than 48 
digits long, the number will not be redialed 
correctly.
You cannot make long 
distance calls. •
Please make sure you have long distance 
service. 
The handset does not display 
the caller’s name and/or 
phone number. •
You need to subscribe to Caller ID.
• Other telephone equipment may be 
interfering with your phone. Disconnect it and 
try again.
• Other electrical appliances connected to the 
same outlet may be...

Useful Information
Answering System Preparation
49
Troubleshooting
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
The CHARGE indicator does 
not go out after the battery has 
been charged.•This is normal.
The Ringer/Message Alert 
indicator flashes slowly when 
the handset is not ringing and 
in use.•The Message Alert is turned on and new 
messages in your voice mailbox have been 
recorded. Turn the Message Alert off (p. 18) 
or listen to the new messages (p. 36).
You cannot have a...

50
Important Safety Instructions
When using this unit, basic safety precautions should always be followed to reduce 
the risk of fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from AC outlets before cleaning. Do not use liquid or aerosol 
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit near water, for example, near a bathtub, washbowl, kitchen 
sink, or the like.
5. Place...