Panasonic Kx Tg2631 Operating Instructions Manual

Multi-unit Operation
For assistance, please visit http://www.panasonic.com/phonehelp41
Answering an intercom call
1Press {C} to answer the page.
2To end the intercom call, press {OFF}.
1Press {1} or {2} to answer the page.
2To end the intercom call, press {1} or 
{2}.
Note:
LWhen the ringer volume is set to off, the 
handset rings at the low level for 
intercom calls.
Transferring calls 
between handsets, 
conference calls
Outside calls can be transferred between 2 
handsets. 2 handsets can have a...

Multi-unit Operation
42For assistance, please visit http://www.panasonic.com/phonehelp
Registering a handset
The included handset and base unit are 
preregistered. If for some reason the 
handset is not registered to the base unit, 
register the handset.
KX-TG2631
1Handset:
{MENU} i {0}{0}
2Base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE 
indicator flashes.
LAfter the CHARGE indicator starts 
flashing, the rest of the procedure 
must be completed within 1 minute.
3Handset:
Press {OK}, then...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp43
Wall mounting
Base unit
Connect the telephone line cord. Mount 
the unit by inserting the mounting pins into 
the round openings on the adaptor (for pin 
2, use round cut out at the bottom of the 
adaptor if you are using the 4 inches 
phone plate), then sliding the unit down to 
secure it.
Connect the AC adaptor to power outlet 
(page 10).
LThere are two common types of wall 
phone plates. The distance between 1 
and 2...

Useful Information
44For assistance, please visit http://www.panasonic.com/phonehelp
Headset (optional)
Connecting a headset to the handset 
allows hands-free phone conversations. 
Please use only a Panasonic headset 
(page 6).
LHeadset shown is KX-TCA86.
Switching a call between the headset 
and speakerphone
To switch to the speakerphone, press {s}.
To return to the headset, press {C}.
TG2631_2632.book  Page 44  Monday, December 26, 2005  2:02 PM 

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp45
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG2632
Display messageCause/solution
BusyLThe called base unit is in use.
LAnother handset or the called handset is in use.
*1
LThe handset you tried to copy phonebook items to is in 
use.*1
LThe handset you are calling is too far from the base 
unit.*1
Error!!LThe handset’s registration has failed. Move the handset...

Useful Information
46For assistance, please visit http://www.panasonic.com/phonehelp
Troubleshooting
General use
Programmable settings
Battery recharge
ProblemCause/solution
The unit does not work.LMake sure the battery is installed correctly and fully 
charged (page 12).
LCheck the connections (page 10).
LUnplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
LThe handset has not been registered to the base unit. 
Register the handset (page 42).
I cannot hear a dial...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp47
Making/answering calls, intercom
ProblemCause/solution
Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.LMove the handset and the base unit away from other 
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antenna.
LTurn on the clarity booster feature (page 21).
LIf your unit is connected to a telephone line with DSL 
service, we recommend connecting a noise...

Useful Information
48For assistance, please visit http://www.panasonic.com/phonehelp
Phonebook
*1 KX-TG2632
Caller ID
ProblemCause/solution
Copying stopped with an 
item displayed.
*1LThe destination handset may have lost communication 
with the base unit, or the destination unit user may have 
pressed {C} or {s}.
The displayed phonebook item was not copied to the 
unit. Press {OFF}. Confirm that the destination unit is 
not in use and try again.
ProblemCause/solution
The handset does not 
display the...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp49
Answering system
*1 KX-TG2632The 2nd caller’s 
information is not 
displayed during an 
outside call.LIn order to use Caller ID, Call Waiting, or Call Waiting 
Caller ID (CWID), you must first contact your telephone 
company and subscribe to the desired service.
After subscribing, you may need to contact your 
telephone company again to activate this specific 
service, even if you already subscribed to both Caller ID...

Useful Information
50For assistance, please visit http://www.panasonic.com/phonehelp
FCC and other information
This equipment complies with Part 68 of 
the FCC rules and the requirements 
adopted by the ACTA. On the bottom of 
this equipment is a label that contains, 
among other information, a product 
identifier in the format US:ACJ----------.
If requested, this number must be 
provided to the telephone company.
L Registration No
    ............(found on the bottom of the unit)
L Ringer Equivalence...