Panasonic Kx Tg2584 Operating Instructions Manual

Cordless Telephone
31 (Base\Unit)
You can make a call by simply lifting the handset and dialing the phone
number. To hang up, place the handset on the cradle.
Using the speakerphone
1
Press (DIGITAL–SP-PHONE).
≥The indicator lights.
2
Dial a telephone number.
≥The dialed number is displayed.
≥After a few seconds, the display will show the
length of the call.
3
When the other party answers, talk into the
MIC (microphone).
4
To hang up, press (DIGITAL–SP-PHONE).
≥The indicator light goes out.
≥“Line in...

To adjust the handset volume (3 levels) or speaker
volume (8 levels) while talking
To increase, press (‹). 
To decrease, press 
(›).
≥The display shows the volume level for a few
seconds.
To put a call on hold
Press (HOLD).
≥“Line on HOLD.” is displayed on the 
cordless handset.
≥The DIGITAL SP-PHONE indicator flashes.
≥If using the handset, you can place it on the cradle.
≥If you put a call on hold for more than 6 minutes, an
alarm tone will sound. The call will be disconnected
after a total of 10...

33
Cordless Telephone
Answering Calls
When a call is received, the unit rings and “Incoming call” is
displayed. If you subscribe to a Caller ID service, the calling party
information will be displayed after the first ring (p. 34). 
In order to view the Caller ID information, please wait until the
second ring to answer a call.
(Cordless\Handset)
Press .
≥You can also answer a call by pressing any dialing
button (0)to (9), ($)or (#)(—Any Key Talk).
≥You can select the ringer volume while a call
is being...

34
Caller ID Service
This unit is compatible with a Caller ID service offered by your telephone
company. If you subscribe to a Caller ID service, the calling party’s
information will be shown on the cordless handset and the base unit after
the first ring.
The unit can record information of up to 50 different callers, including the
time and date received and the number of times called, in the Caller List.
The Caller List information is sorted by the most recent call to the oldest.
When the 51st call is...

35
Cordless Telephone
Using the Caller List“
Viewing the Caller List
You can view the caller list with the cordless handset or the base unit.
Caller List information includes the caller’s name and phone number, the
time and date the call was received, and the number of times that caller
called (p. 36).
Make sure the base unit and cordless handset are not being used.
(Cordless\Handset)
1
Press (›)or (‹)to enter the
Caller List.
≥The display will show, for
example, the following.
≥You can go to the...

“Using the Caller List
36
•In some cases, you may have to edit the number before dialing (p. 37, 38). 
(Ex. You may have to delete “1” and the area code.)
•If a phone number is not displayed in the caller information, you cannot call back
that caller.
What “√” means
When the display shows “√”, you have already
viewed this calling information, answered the call,
called back the caller or played back the
message (p. 64). If the same caller calls again,
the call entry with “√” will be replaced with the
new...

Cordless Telephone
37
Editing the Caller’s Phone Number 
You can edit a phone number into one of 3 patterns to call back or store it
into the directory.
Make sure the base unit and cordless handset are not being used.
(Cordless\Handset)
1
Press (›)or (‹)to enter the Caller List.
2
Scroll to the desired caller by pressing
(›)or (‹), and press (fl).
3
Press (fl)(Yeskey) at “Edit”.
4
Press (fl)(Editkey) to select a
pattern.
≥Each time you press (fl) (Editkey), the
number is rearranged into one of 3 patterns....

“Using the Caller List
38(Base\Unit)
1
Press (›)or (‹)to enter the Caller List.
2
Scroll to the desired caller by pressing
(›)or (‹), and press (FUNCTION/EDIT).
3
Press (FUNCTION/EDIT)to select a
pattern.
≥Each time you press (FUNCTION/EDIT),
the number is rearranged into one of
3 patterns.
a(7 digit pattern)
b–(10 digit pattern)
c
1––(11 digit pattern)
≥The order in which patterns a–care
displayed depends on how the telephone
number is displayed in step 2.
4
After editing the number, you can continue...

Cordless Telephone
39
The Caller ID Number Auto Edit Feature
(Cordless\Handset)
There are 3 patterns of phone number (a, b, and c, p. 37, 38). This
feature allows your phone to automatically edit an in-coming Caller ID
number into one pattern you preferred, and display the Caller ID number
with that pattern on the base unit and cordless handset automatically.
After this feature is activated, Caller ID numbers coming from considered
area codes (201, for example), from which the Caller ID numbers have
been...

“Using the Caller List
40
4
Scroll to “Caller ID edit” by pressing
(›)or (‹).
5
Press (fl)(Yeskey).
6
Select “On” or “Off” by pressing(›)or
(‹).
7
Press (fl)(Savekey).
≥A beep sounds.
≥To exit the programming mode, press (OFF).
≥When the feature is set to OFF, the unit will still be able to display Caller ID, like
regular Caller ID telephone, but the in-coming Caller ID number will not be edited
by pattern and by area codes. 
1Caller ID e dit
431=Yes
Auto edit
:On
431=Save
Auto edit
:Off
431=Save
Auto...