Panasonic Kx Tg2583 Operating Instructions Manual

							One-Touch Dialer
41
Cordless Telephone
You can store a phone number in the (DIRECT)button of the handset. The
stored number is dialed with a one-touch operation.
Storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/EXIT/CH).
2
Press Öor Ñrepeatedly until the arrow
points to “Program”.
3
Press FWD/EDITá(Yeskey).
4
While the arrow points to “Save
DIRECT#”, press 
FWD/EDITá(Yeskey).
5
Enter a phone number, up to 22 digits.
•Each time you press (INTERCOM/CLEAR)the
digit to the left of the cursor is erased. To erase
all digits, press and hold (INTERCOM/CLEAR).
•To move the cursor, press BACK Üor
FWD/EDITá.
6
Press Ö(Nextkey).
•If you want to edit the entered number, press
Ñ(Editkey) and return to step 5.
7
Press FWD/EDITá(Savekey).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE)can be stored in a phone
number in step 5. This counts as one digit (p. 54).
IH G=Next
1234567890123456
789012
F=EditH=Save
1234567890123456
789012
Save DIRECT#
HProgram
GF H=Yes
HSave DIRECT#
Set flash time
GF H=Yes
1234567890123456
789012
IH G=Next 
						

							42
Dialing the Stored Number in the DIRECT
Button
1
Press (DIRECT).
•The stored number is displayed.
2
Press (TALK).
•The number is dialed.
•You can also dial the stored number by pressing (TALK)then pressing
(DIRECT). (If your line has rotary or pulse service, any access numbers stored
after pressing (TONE)will not be dialed.)
One Touch Dialer
1234567890123456
789012
Talk
1234567890123456
789012 
						

							43
Cordless Telephone
You can store up to 50 names and phone numbers in the directory using
the handset. All directory items are sorted by the first word in alphabetical
order. Using the directory, you can make a call by selecting a name on
the handset or base unit display. 
Storing Names and Numbers in the
Directory
Storing must be carried out with the handset. 
Make sure the unit is in the standby mode initially.
Using the Directory
(Continued \)
(INTERCOM/CLEAR)
(REDIAL/PAUSE)
    ,      , BACK      , 
FWD/EDIT
(FUNCTION/EXIT/CH)
The dialing buttons can 
be used to enter letters 
and symbols. 
						

							44
Tom Jones
0987654321
F=EditH=Save
Tom Jones
0987654321
Using the Directory
1
Press (FUNCTION/EXIT/CH).
2
While the arrow points to “Save
directory”, press 
FWD/EDITá(Yeskey).
•The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters using
the dialing buttons (p. 45).
•To move the cursor, press BACKÜor
FWD/EDITá.
•If a name is not required, press Ö(Nextkey)
and go to step 5.
4
Press Ö(Nextkey).
5
Enter a phone number, up to 22 digits.
•If you misdial, press (INTERCOM/CLEAR).
Digits are erased from the right. To erase all
digits, press and hold (INTERCOM/CLEAR).
6
Press Ö(Nextkey).
•If you want to change the storing name or
number, press Ñ(Editkey) repeatedly to
reach the desired display and change it.
7
Press FWD/EDITá(Savekey).
•A beep sounds.
•
To continue storing other items, repeat from step 2.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE)can be stored in a phone
number in step 5. This counts as one digit (p. 54).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the display shows“Directory full” in step 2, press (FUNCTION/EXIT/CH).
To erase other stored items from the directory, see page 51.
•After the maximum of 50 items has been stored, “Directory full” is also
displayed.
HSave directory
Ringer volume
GF H=Yes
Directory=
20 items
Enter name
IH G=Next
Enter name
Tom Jones
IH G=Next
Enter phone no.
0987654321
IH G=Next 
						

							45
Cordless Telephone
#&’() ,–./1
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRS p q r s 7
TUV t uv8
WXYZwxyz9
0
Blank
To move the cursor to the left
To move the cursor to the right
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(0)
BACKÜ
FWD/EDITá
1234567891011
Number of times key is pressed
Selecting Characters to Enter Names
The handset dialing buttons ((0)to (9)), BACKÜ
and FWD/EDITácan be used to enter letters
and symbols. The letters are printed on the
dialing buttons.
Pressing each button selects a character as
shown below.
Keys
•To enter another character using the same dialing button, press FWD/EDITá
to move the cursor to the next space.
If you make a mistake while entering a name
Use BACKÜor FWD/EDITáto move the cursor to the incorrect
character, press 
(INTERCOM/CLEAR)to delete and enter the correct
character. Each time you press 
(INTERCOM/CLEAR), a character is erased
from the right. To erase all characters, press and hold
(INTERCOM/CLEAR).
CH CH TALKBACK BACKFWDEDIT
EDIT
FUNCTION  EXIT
FUNCTION  EXITINT
INTERCOM 
ERCOM    CLEAR
CLEAR
DIRECT
TONE
TONESTOP ALL 
L MSG
ANS 
S ON
SKIP
KIP
NEW 
W MSG REPE
PEAT
LOUD 
LOUD SEARCH
123
456
789
0
FLASHREDIALCALL WAIT
ANS  OFF
OFF
PAUSEPL AYBACK
O
N
O
F
F 
						

							46
For example, to enter “Tom Jones”:
1
Press (FUNCTION/EXIT/CH).
2
While the arrow points to “Save
directory”, press 
FWD/EDITá
(Yeskey).
3
Press (8).
4
Press (6)six times, then press FWD/EDIT
á
to move the cursor to the right.
5
Press (6)four times.
6
Press FWD/EDITátwice to enter a blank.
7
Press (5).
8
Press (6)six times, then press FWD/EDIT
á
to move the cursor to the right.
9
Press (6)five times.
10
Press (3)five times.
11
Press (7)eight times.
12
When finished, press Ö(Nextkey).
•To enter a phone number and continue
storing, see page 44, from step 5.
Enter name
Tom Jones
IH G=Next
T
To
Tom
Tom 
Tom J
Tom Jo
Tom Jon
Tom Jone
Directory=
20 items
Enter name
IH G=Next
Enter phone no.
HSave directory
Ringer volume
GF H=Yes
Using the Directory 
						

							47
Cordless Telephone
Finding Items in the Directory
You can search the directory using the handset or the base unit.
Make sure the unit is in the standby mode initially.
With the handset
1
Press BACKÜor FWD/EDITáto 
enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly until the 
desired item is displayed.
.
•All directory items are stored in the
order shown on the right.
To search for a name by initial
#
Press the dialing button for the
first letter of the desired name
until any name with the same
initial is displayed (see the
Index table on page 49).
Ex. To find “Frank”, press (3)
repeatedly until the first item
under “F” is displayed.
$
Press Örepeatedly until the
name is displayed.
Alphabet letter
Symbol
Telephone number
Number
(If no name is stored)
Press Ö.
Press Ñ.
Directory list
GF
H
=Caller’s list
Ann
1234567890
•You can leave the directory list any time by pressing (FUNCTION/EXIT/CH). 
•If “No items stored” is displayed in step 2, the directory is empty. 
•In step 1, you can go to the Caller List by pressing FWD/EDITá(p. 34).
•If you are viewing the directory with the handset, another person cannot access
the directory using the base unit.
    ,      , BACK      , 
FWD/EDIT
(FUNCTION/EXIT/CH) 
						

							48
Using the Directory
With the base unit
1
Press Üor áto 
enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly until the 
desired item is displayed.
.
•All directory items are stored in the
order shown on the right.
To search for a name by initial
#
Press the dialing button for the
first letter of the desired name
until any name with the same
initial is displayed (see the
Index table on page 49).
Ex. To find “Frank”, press (3)
repeatedly until the first item
under “F” is displayed.
$
Press Örepeatedly until the
name is displayed.
Alphabet letter
Symbol
Telephone number
Number
(If no name is stored)
Press Ö.
Press Ñ.
Directory list
GF
H
=Caller’s list
Ann
1234567890
•You can leave the directory list any time by pressing (STOP/EXIT). 
•If “No items stored” is displayed in step 2, the directory is empty. 
•In step 1, you can go to the Caller List by pressing á(p. 34).
•If you are viewing the directory with the base unit, another person cannot access
the directory using the handset.
    ,      , (STOP/EXIT) 
						

							49
Cordless Telephone
1
Press BACKÜor FWD/EDIT
á
to enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly to
find the directory item that
you want to dial.
•To search for the item by initial,
see page 47.
•To exit the directory, press
(FUNCTION/EXIT/CH).
4
Press (TALK).
•The number is dialed
automatically.
Other symbols, 1
A, B, C, 2
D, E, F, 3
G, H, I, 4
J, K, L, 5
Directory list
GF
H
=Caller’s list
Dialing from the Directory
Make sure the unit is in the standby mode initially.
With the handset With the base unit
1
Press Üor áto enter the
directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly to
find the directory item that
you want to dial.
•To search for the item by initial,
see page 48.
•To exit the directory, press
(STOP/EXIT).
4
Press (DIGITAL!SP-PHONE).
•The number is dialed
automatically.
(1)
(2)
(3)
(4)
(5)(6)
(7)
(8)
(9)
(0)
IndexKeysIndexKeys
M, N, O, 6
P, Q, R, S, 7
T, U, V, 8
W, X, Y, Z, 9
0
Index table
Directory list
GF
H
=Caller’s list
Frank
4567890Frank
4567890 
						

							50
Jane Walker
0981234567
F=EditH=Save
Jane Walker
0981234567
Using the Directory
Editing an Item in the Directory
Programming must be carried out with the handset. 
Make sure the unit is in the standby mode initially.
1
Press BACKÜor FWD/EDITáto enter 
the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly to find the
directory item you want to change, and
press 
FWD/EDITá.
•To search for the item by initial, see page 47.
•If you do not need to change the name, go to
step 5.
4
Edit the name using the dialing buttons,
BACKÜor FWD/EDITá(p. 45), up to 15
characters.
5
Press Ö(Nextkey).
•If you do not need to change the number, go to
step 7.
6
Add a number to the current number.
•Pressing (INTERCOM/CLEAR)erases the digit
to the left of the cursor. To erase all digits,
press and hold (INTERCOM/CLEAR).
7
Press Ö(Nextkey).
•If you want to change the storing name or
number, press Ñ(Editkey) repeatedly to
reach the desired display and change it.
8
Press FWD/EDITá(Savekey).
•A beep sounds.
•To continue editing other items, repeat from
step 3.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
Jane
1234567
Enter name
Jane Walker
IH G=Next
1234567
IH G=Next
0981234567
IH G=Next
Enter name
Jane
IH G=Next
Directory list
GF
H
=Caller’s list