Panasonic Kx Tg2583 Operating Instructions Manual

One-Touch Dialer
41
Cordless Telephone
You can store a phone number in the (DIRECT)button of the handset. The
stored number is dialed with a one-touch operation.
Storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/EXIT/CH).
2
Press Öor Ñrepeatedly until the arrow
points to “Program”.
3
Press FWD/EDITá(Yeskey).
4
While the arrow points to “Save
DIRECT#”, press 
FWD/EDITá(Yeskey).
5
Enter a phone number, up to 22 digits.
•Each time you press...

42
Dialing the Stored Number in the DIRECT
Button
1
Press (DIRECT).
•The stored number is displayed.
2
Press (TALK).
•The number is dialed.
•You can also dial the stored number by pressing (TALK)then pressing
(DIRECT). (If your line has rotary or pulse service, any access numbers stored
after pressing (TONE)will not be dialed.)
One Touch Dialer
1234567890123456
789012
Talk
1234567890123456
789012 

43
Cordless Telephone
You can store up to 50 names and phone numbers in the directory using
the handset. All directory items are sorted by the first word in alphabetical
order. Using the directory, you can make a call by selecting a name on
the handset or base unit display. 
Storing Names and Numbers in the
Directory
Storing must be carried out with the handset. 
Make sure the unit is in the standby mode initially.
Using the Directory
(Continued \)
(INTERCOM/CLEAR)
(REDIAL/PAUSE)
    ,      , BACK      ,...

44
Tom Jones
0987654321
F=EditH=Save
Tom Jones
0987654321
Using the Directory
1
Press (FUNCTION/EXIT/CH).
2
While the arrow points to “Save
directory”, press 
FWD/EDITá(Yeskey).
•The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters using
the dialing buttons (p. 45).
•To move the cursor, press BACKÜor
FWD/EDITá.
•If a name is not required, press Ö(Nextkey)
and go to step 5.
4
Press Ö(Nextkey).
5
Enter a phone number, up to 22 digits.
•If you misdial, press...

45
Cordless Telephone
#&’() ,–./1
ABCabc2
DEFdef3
GHIghi4
JKLjkl5
MNOmno6
PQRS p q r s 7
TUV t uv8
WXYZwxyz9
0
Blank
To move the cursor to the left
To move the cursor to the right
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(0)
BACKÜ
FWD/EDITá
1234567891011
Number of times key is pressed
Selecting Characters to Enter Names
The handset dialing buttons ((0)to (9)), BACKÜ
and FWD/EDITácan be used to enter letters
and symbols. The letters are printed on the
dialing buttons.
Pressing each button selects a character...

46
For example, to enter “Tom Jones”:
1
Press (FUNCTION/EXIT/CH).
2
While the arrow points to “Save
directory”, press 
FWD/EDITá
(Yeskey).
3
Press (8).
4
Press (6)six times, then press FWD/EDIT
á
to move the cursor to the right.
5
Press (6)four times.
6
Press FWD/EDITátwice to enter a blank.
7
Press (5).
8
Press (6)six times, then press FWD/EDIT
á
to move the cursor to the right.
9
Press (6)five times.
10
Press (3)five times.
11
Press (7)eight times.
12
When finished, press Ö(Nextkey).
•To enter a phone...

47
Cordless Telephone
Finding Items in the Directory
You can search the directory using the handset or the base unit.
Make sure the unit is in the standby mode initially.
With the handset
1
Press BACKÜor FWD/EDITáto 
enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly until the 
desired item is displayed.
.
•All directory items are stored in the
order shown on the right.
To search for a name by initial
#
Press the dialing button for the
first letter of the desired...

48
Using the Directory
With the base unit
1
Press Üor áto 
enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly until the 
desired item is displayed.
.
•All directory items are stored in the
order shown on the right.
To search for a name by initial
#
Press the dialing button for the
first letter of the desired name
until any name with the same
initial is displayed (see the
Index table on page 49).
Ex. To find “Frank”, press (3)
repeatedly until the first item
under...

49
Cordless Telephone
1
Press BACKÜor FWD/EDIT
á
to enter the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly to
find the directory item that
you want to dial.
•To search for the item by initial,
see page 47.
•To exit the directory, press
(FUNCTION/EXIT/CH).
4
Press (TALK).
•The number is dialed
automatically.
Other symbols, 1
A, B, C, 2
D, E, F, 3
G, H, I, 4
J, K, L, 5
Directory list
GF
H
=Caller’s list
Dialing from the Directory
Make sure the unit is in the standby...

50
Jane Walker
0981234567
F=EditH=Save
Jane Walker
0981234567
Using the Directory
Editing an Item in the Directory
Programming must be carried out with the handset. 
Make sure the unit is in the standby mode initially.
1
Press BACKÜor FWD/EDITáto enter 
the directory list.
2
Press Öor Ñ.
•The first item is displayed.
3
Press Öor Ñrepeatedly to find the
directory item you want to change, and
press 
FWD/EDITá.
•To search for the item by initial, see page 47.
•If you do not need to change the name, go to
step...