Panasonic Kx Tg2431 Operating Instructions Manual

Useful Information
For assistance, please call 1-800-211-PANA (7262).51
Belt clip
You can hang the handset on your belt or 
pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip (1), pull 
the right edge in the direction of the arrow 
(2).
Headset (optional)
Connecting an optional headset to the 
handset allows hands-free phone 
conversations. Please use only a 
Panasonic headset. See page 5 for 
compatible headsets and ordering...

Useful Information
52For assistance, please call 1-800-211-PANA (7262).
Wall mounting
Base unit
The base unit can be mounted on a wall phone plate.
1Connect the AC adaptor and the telephone line cord.
2Insert the hooks on the wall mounting adaptor into the holes (A) and (B) on the base 
unit.
To power
outlet
Fasten the AC adaptor cord.
Hooks
A
B
TG2431_2432(e).book  Page 52  Thursday, February 3, 2005  5:01 PM 

Useful Information
For assistance, please call 1-800-211-PANA (7262).53
3Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until 
it clicks into place.
4Connect the telephone line cord. Mount the unit, then slide it down.
LRaise the antenna.
To remove the wall mounting adaptor
While pushing down the release levers (1), remove the adaptor (2).
2
TG2431_2432(e).book  Page 53  Thursday, February 3, 2005  5:01 PM 

Useful Information
54For assistance, please call 1-800-211-PANA (7262).
Charger unit (KX-TG2432 only)
The charger can be wall mounted, as shown below.
1Connect the AC adaptor.
2Drive the screws (not included) into the wall using the wall mount template (see below).
3Mount the charger (1).
4Slide it down (2) and to the right (3) until it is secure.
1
2
3
25.4 mm
Screws
To power
outlet  (1)
Wall mount template for the charger
25.4 mm 
(1)
TG2431_2432(e).book  Page 54  Thursday, February 3, 2005  5:01 PM 

Useful Information
For assistance, please call 1-800-211-PANA (7262).55
Error messages
If the unit detects a problem, one of the following messages will be displayed on the 
handset.
*1  KX-TG2432 only
Display messageCause & solution
BusyLThe called handset is in use.
*1
LThe handset you tried to copy phonebook items to is in 
use.*1
LThe handset you are calling is too far from the base 
unit.*1
Error!!LWhen you tried to register the handset, the handset and 
the base unit could not link for some reason,...

Useful Information
56For assistance, please call 1-800-211-PANA (7262).
Troubleshooting
General use
Programmable settings
ProblemCause & solution
The unit does not work.LMake sure that the battery is installed correctly (page 
10).
LCheck the connections (page 9).
LFully charge the battery (page 11).
LClean the charge contacts and charge again (page 11).
LUnplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
LRe-install the battery (page 10) and fully charge it.
The...

Useful Information
For assistance, please call 1-800-211-PANA (7262).57
Making/answering calls, Intercom
Phonebook
ProblemCause & solution
Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.LMove the handset and the base unit away from other 
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antenna.
LTurn on the clarity booster feature (page 20).
LIf your unit is connected to a telephone line with xDSL 
service, we recommend connecting a noise...

Useful Information
58For assistance, please call 1-800-211-PANA (7262).
Caller ID
While storing an item in 
the phonebook, the 
handset starts to ring.LA call is being received. Answer the call and start again 
from the beginning after hanging up.
Copying stopped with an 
item displayed.LThe destination handset may have lost communication 
with the base unit, or the destination handset user may 
have pressed {C} or {s}. 
The displayed phonebook item was not copied to the 
handset. Press {OFF}. Confirm...

Useful Information
For assistance, please call 1-800-211-PANA (7262).59
Answering system
The display exits the 
caller list while searching.LThe handset automatically exits after 1 minute of 
inactivity.
ProblemCause & solution
I cannot listen to 
messages from a remote 
location.LA touch tone phone is required for remote operation.
LPress the remote code correctly and press each key 
firmly (page 47).
LThe answering system is off. Turn it on (page 48).
The other party 
complains that they 
cannot leave...

Useful Information
60For assistance, please call 1-800-211-PANA (7262).
Battery charge
Power failure
ProblemCause & solution
“Recharge battery” is 
displayed, 7 flashes 
or the handset beeps 
intermittently.LFully charge the battery (page 11).
“Charge for 6h” and 
8 are displayed and 
the handset does not 
work.LThe battery has been discharged. Fully charge the 
battery (page 11).
I charged the battery fully, 
but “Recharge 
battery” is still 
displayed and/or 7 
continues to flash, or 
“Charge for 6h”...