Panasonic Kx Tg2431 Operating Instructions Manual

Intercom Features
For assistance, please call 1-800-211-PANA (7262).31
For KX-TG2432 users
Call the desired unit by selecting the 
extension number, shown in the upper 
right of each handset’s display. The base 
unit’s extension number is 0.
LTo confirm the handset’s extension 
number ([1] or [2]), place the handset 
on the base unit or charger.
LThe base unit will display the paging or 
paged handset number (H1 or H2).
From the handset to the base unit
1Handset:
Press {INTERCOM}, then press {0}.
LYou...

Intercom Features
32For assistance, please call 1-800-211-PANA (7262).
Transferring a call (KX-
TG2432 only)
Outside calls can be transferred from one 
handset to the other.
1During an outside call, press 
{INTERCOM}.
LThe call will be put on hold.
2To page the other handset, press 
{handset[1]} or {handset[2]}.
3Wait for the paged party to answer.
LThe paged handset user can answer 
by pressing {C}, {s}, or 
{INTERCOM}.
LIf there is no answer, press {C} or 
{s} to return to the outside call.
4To...

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).33
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each 
item can be found on the corresponding pages. To program, press {MENU}, press {V} or 
{^} to scroll through the menu, and press {>} or {Select} when the desired menu item or 
setting is displayed.
Important:
LBefore programming, make sure the handset and base unit are not being used. The 
handset must be...

Programmable Settings
34For assistance, please call 1-800-211-PANA (7262).
*1 Can be used to activate Caller IQ. See 
the leaflet included with this unit for 
more information.
*2 “Activate CIQ?” is displayed if you 
have not subscribed to openLCR 
service. “Turn CIQ on?” is displayed 
when Caller IQ is turned off. See the 
leaflet included with this unit for more 
information.
*3 If you program these settings using one 
of the handsets, you will not need to 
program the same item using the other...

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).35
Handset ringer tone
You can change the ringer tone heard 
when an outside call is received. There are 
3 tones and 4 melodies. The default 
setting is “Tone 1”.
1Press {MENU}.
2Scroll to “Ringer setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “Ringer tone” by pressing 
{V} or {^}, then press {>}.
4Press {V} or {^} repeatedly to select 
the desired setting.
LYou can also select the ringer tone by 
pressing {1} to {7}....

Programmable Settings
36For assistance, please call 1-800-211-PANA (7262).
Call options
Auto talk
When this feature is turned on, you can 
answer a call by lifting the handset off the 
base unit or charger without pressing 
{C}. The default setting is OFF.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “Auto talk” by pressing {V} 
or {^}, then press {>}.
4Press {V} or {^} repeatedly to select 
“On” or “Off”.
5Press {Save}, then press {OFF}.
Note:
LIf you...

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).37
Display options
Handset LCD contrast
You can adjust the handset display 
contrast. There are 6 levels. The default 
setting is level 3.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “LCD contrast” by pressing 
{V} or {^}, then press {>}.
4Press {V} or {^} repeatedly to select 
the desired setting.
5Press {Save}, then press {OFF}.
Display language
You can select either “English”...

Programmable Settings
38For assistance, please call 1-800-211-PANA (7262).
Note:
LThe setting should stay at 700 ms unless 
pressing {Flash} fails to pick up the Call 
Waiting call.
LIf the unit is connected via a PBX, certain 
PBX functions (call transferring, etc.) 
may not work correctly. Consult your 
PBX supplier for the correct setting.
Line mode
The line mode is preset to “B” and 
generally should not be adjusted. If “Line 
in use” on the handset is not displayed 
properly, the line mode selection...

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).39
1Handset:
Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “Registration” by pressing 
{V} or {^}, then press {>}.
4KX-TG2431 base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE 
indicator flashes.
KX-TG2432 base unit:
Press and hold the locator/handset 
button that corresponds to the handset 
you want to re-register ({LOCATOR/
INTERCOM 1} or {LOCATOR/
INTERCOM 2}) until the...

Programmable Settings
40For assistance, please call 1-800-211-PANA (7262).
Programming via direct commands
You can also program most features using “direct commands”—special codes that take 
you directly to the feature you wish to program and allow you to select the desired setting. 
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1Press {MENU}.
2Enter the desired feature code (shown below).
3Enter the desired setting code (shown...