Panasonic Kx Tg2431 Operating Instructions Manual

Preparation
For assistance, please call 1-800-211-PANA (7262).11
Battery charge
Place the handset on the base unit or 
charger for 6 hours before initial use.
LThe unit will beep once, the CHARGE 
indicator will light, and “Charging” will 
be displayed.
L“Charge completed” is displayed 
when the battery has been fully charged. 
The CHARGE indicator will remain lit.
Base unit
Charger unit (KX-TG2432 only)
Note:
LTo ensure the battery charges properly, 
clean the charge contacts of the 
handset, base unit,...

Preparation
12For assistance, please call 1-800-211-PANA (7262).
Battery performance
After your Panasonic battery is fully 
charged, you can expect the following 
performance:
*1 Handset is off the base unit or charger 
but not in use.
Note:
LBattery power is consumed whenever 
the handset is off the base unit or 
charger, even when the handset is not in 
use. The longer you leave the handset 
off the base unit or charger, the shorter 
you can actually talk on the handset. 
Actual battery performance...

Preparation
For assistance, please call 1-800-211-PANA (7262).13
Controls and displays
Controls
Base unit
A{LOCATOR/INTERCOM 1}
B{LOCATOR/INTERCOM 2}
C{LOCATOR/INTERCOM}
D{} (Skip)
FAntenna
GSpeaker
H{ERASE}
I{GREETING REC} (Recording)
J{STOP}K{GREETING CHECK}
LDisplay
MCharge contacts
NMIC (Microphone)
OCHARGE indicator
PVOL. (Volume) {}
Q{MESSAGE}
MESSAGE indicator
R{ANSWER ON} 
ANSWER ON indicator
KX-TG2432 KX-TG2431
ABCDEFGHIJKL
MNOP QR
TG2431_2432(e).book  Page 13  Thursday, February 3, 2005  5:01 PM 

Preparation
14For assistance, please call 1-800-211-PANA (7262).
Handset
ASpeaker
BSoft key
CHeadset jack
D{C} (TALK)
ENavigator key
F{s} (SP-PHONE)
G{*} (TONE)
H{PAUSE}{REDIAL}
IRinger indicator
Message indicator
JReceiver
KDisplay
L{MENU}
M{OFF}
N{MUTE} {CLEAR}
O{HOLD} {INTERCOM}
PMicrophone
QCharge contactsCharger unit (KX-TG2432 only)
ACharge contacts
BCHARGE indicator
Using the navigator key
The handset navigator key can be used to 
navigate through menus and to select 
items shown on the display,...

Preparation
For assistance, please call 1-800-211-PANA (7262).15
Display
Base unit display items
*1 KX-TG2432 only
Handset display items
Soft keys
The handset features 2 soft keys. By 
pressing a soft key, you can select the 
function displayed directly above it.
LThe functions displayed will vary 
depending on how you are using the 
unit.
LWhen a function does not appear above 
a soft key, the soft key has no function.
Soft key examples:
*1 KX-TG2432 only
Backlit display and handset keypad
The handset...

Preparation
16For assistance, please call 1-800-211-PANA (7262).
Setting the date and time
Set the date and time so that the unit will 
announce the day and time each message 
was recorded by the answering system 
(page 42) when you play back messages.
1Press {MENU}.
2Scroll to “Date and time” by pressing 
{V} or {^}, then press {>} or {Select}.
3Enter the current month, day, and year 
by selecting 2 digits for each.
Example: June 15, 2005
Press {0}{6} {1}{5} {0}{5}.
4Enter the current hour and minute...

Making/Answering Calls
For assistance, please call 1-800-211-PANA (7262).17
Making calls
1Lift the handset and press {C}.
L“Talk” will be displayed.
2Dial the phone number.
3When finished talking, press {OFF} or 
place the handset on the base unit or 
charger.
Note:
L“Line in use” is displayed when 
someone is talking on the other handset 
(KX-TG2432 only) or another phone.
To adjust the receiver volume
3 levels (high/medium/low) are available.
While using the receiver, press {V} or {^} 
repeatedly.
To...

Making/Answering Calls
18For assistance, please call 1-800-211-PANA (7262).
To make a call using the redial list
The last 5 phone numbers dialed are 
stored in the redial list.
1Press {REDIAL}.
LThe last number dialed will be 
displayed.
2Press {V} or {^} repeatedly to display 
the desired number.
LTo delete the displayed number, 
press {CLEAR}.
LTo exit the list, press {OFF}.
3Press {C}, {s}, or {Call}.
Answering calls
When a call is being received, the ringer 
indicator flashes rapidly.
1Lift the...

Making/Answering Calls
For assistance, please call 1-800-211-PANA (7262).19
Useful features during a 
call
HOLD button
This feature allows you to put an outside 
call on hold.
KX-TG2431:
Press {HOLD} during an outside call.
L“Hold” will be displayed.
LTo return to the call, press {C} or {s}.
KX-TG2432:
1Press {HOLD} during an outside call.
LTo transfer the call to the other 
handset, see page 32, step 2.
2Press {HOLD} again.
L“Hold” will be displayed.
LTo return to the call, press {C} or 
{s}.
LThe other...

Making/Answering Calls
20For assistance, please call 1-800-211-PANA (7262).
Clarity booster
This feature can improve sound clarity 
when the handset is used in an area where 
there may be interference. During an 
outside call, this feature will be turned on 
automatically when necessary. This 
feature will turn off when you hang up or 
put a call on hold. It will not turn off 
automatically during a call. You can also 
turn this feature on or off manually.
1Press {MENU} during an outside call.
2Press {2}...