Panasonic Kx Tg2343 Operating Instructions Manual

Useful Information
For assistance, please call: 1-800-211-PANA(7262)51
Wall Mounting
This unit can be mounted on a wall phone plate.
1Press the tabs in the direction 
of the arrows (1), then remove 
the wall mounting adaptor (2).
2Connect the AC adaptor.  • Fasten the AC adaptor cord to 
prevent it from being 
disconnected. 
 
3Tuck the telephone line cord 
inside the wall mounting 
adaptor, then push the adaptor 
in the direction of the arrows 
(1 and 2) while pressing the 
tabs.
• The word “UP WALL”...

52
Belt Clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip  
Shoulder Rest Attachment
Use the shoulder rest attachment if you need to keep your hands free during a 
phone conversation.
To attach the shoulder rest 
attachment
Attach the included belt clip to the 
handset (see above), then attach the 
shoulder rest attachment to the belt clip 
as shown below. You will hear a click 
when the shoulder rest attachment is in...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)53
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional headset
Open the headset jack cover, and insert the headset plug into the headset jack as 
shown below. 
• Headset sold separately. Model...

54
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1]  [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 17
Ringer tone [1] [2] [1]–[3] :Tone pattern 1–3 
[4]–[7] : Melody pattern 1–4p. 18
Message play[2]p. 45
Date and time [4]Go to Step 3 on page 14. —
Voice enhancer[5] [1] : On  [0] : Off p. 25
Activate Caller IQ *1 [7] [1] —
View information *3[7]...

For assistance, please call: 1-800-211-PANA(7262)55
Direct Commands
Useful Information
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1Can be used to activate Caller IQ. See the leaflet included with this unit for more 
information.
*
2For openLCR...

56
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention. 
Display message Cause & Remedy
Recharge battery• The battery needs to be charged. Recharge the 
battery (p. 10).
Charge for 6h• The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 10).
No link to base.
Move closer to 
base, try again.• The handset has lost communication with the base 
unit. Walk closer to the base unit and try again or 
re-register the...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)57
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 56) for the Cause & Remedy.
Telephone System
Problem Cause & Remedy
“No link to base. Move 
closer to base, try 
again.” is displayed and an 
alarm tone sounds.• You are too far from the base unit. Walk 
closer to the base unit.
• Confirm the base unit’s AC adaptor is 
plugged in.
• Raise the base unit antenna.
• If the...

Troubleshooting
58
You cannot make long 
distance calls.• Please make sure you have long distance 
service.
• Check if Caller IQ is on. Turn Caller IQ off 
(p. 62).
The handset does not display 
the caller’s name and/or 
phone number.• You need to subscribe to Caller ID.
• Other telephone equipment may be 
interfering with your phone. Disconnect it and 
try again.
• Other electrical appliances connected to the 
same outlet may be interfering with Caller ID.
• Telephone line noise may be affecting Caller...

For assistance, please call: 1-800-211-PANA(7262)59
Troubleshooting
Useful Information
Answering System  
Problem Cause & Remedy
The Answering System is on, 
but incoming messages are 
not recorded.• The recording time is set to “Greeting only”. 
Select “1 minute”, “2 minutes” or “3 minutes” 
(p. 20).
• Memory is full. Erase unnecessary messages 
(p. 47).
“ ” flashes and the 
ANSWER ON indicator 
flashes rapidly. No new 
messages are recorded.• Memory is full. Erase unnecessary messages 
(p. 47).
You...

Troubleshooting
60
General 
Problem Cause & Remedy
The handset and/or base unit 
does not work.• Check the settings (p. 9–11).
• Check whether the dialing mode setting is 
correct (p. 15).
• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again 
(p. 11).
• Check battery installation (p. 10).
• Unplug the base unit’s AC adaptor to reset it. 
Plug in, and try again.
• Re-install the battery (p. 10) and fully charge 
it.
“Recharge battery” is 
displayed, “7” flashes, or 
the handset...