Panasonic Kx Tg2336 Operating Instructions Manual

Useful Information
For assistance, please call: 1-800-211-PANA(7262)51
Wall Mounting
This unit can be mounted on a wall phone plate.
1Push the hook and turn it 
upward. Turn the hook until a 
click is heard.
2Press the tabs in the direction 
of the arrows (1), then remove 
the wall mounting adaptor (2). 
 3Connect the AC adaptor. Tuck 
the telephone line cord inside 
the wall mounting adaptor, then 
push the adaptor in the direction 
of the arrows (1 and 2).
• The word “UP WALL” should face 
upward.
•...

52
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional headset
Open the headset jack cover, and insert the headset plug into the headset jack as 
shown below. 
• Headset sold separately. Model shown here is KX-TCA88.
To switch to the speakerphone while using the...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)53
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], [*] and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1]  [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 15
Ringer tone 
(for handset)[1] [2] [1]–[3] : Tone pattern 1 – 3 
[4]–[7] : Melody pattern 1 – 4
[8]–[9] : Downloaded melody 
pattern 1 – 2 *
1
p. 16
Incoming call tone 
(for...

Direct Commands
54
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1You need to first download melody data from the openLCR web site.
*2Can be used to activate Caller IQ. See the leaflet included with this unit for more 
information.
*
3For openLCR...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)55
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display message Cause & Remedy
Recharge battery• The battery needs to be charged. Recharge the 
battery (p. 10).
Charge for 6h• The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 9).
No link to base.
Move closer to 
base, try again.• The handset has lost communication with the base...

56
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 55) for the Cause & Remedy.
Problem Cause & Remedy
“No link to base. Move 
closer to base, try 
again.” is displayed and an 
alarm tone sounds.• You are too far from the base unit. Walk 
closer to the base unit.
• Confirm the base unit’s AC adaptor is 
plugged in.
• Raise the base unit antenna.
• If the above remedies do not solve the 
problem, the handset may have lost 
communication...

For assistance, please call: 1-800-211-PANA(7262)57
Troubleshooting
Useful Information
You cannot redial. • If the last number dialed was more than 
48 digits long, the number will not be redialed 
correctly.
You cannot make long 
distance calls.• Please make sure you have long distance 
service.
• Check if Caller IQ is on. Turn Caller IQ off 
(p. 59).
The handset does not display 
the caller’s name and/or 
phone number.• You need to subscribe to Caller ID.
• Other telephone equipment may be interfering...

Troubleshooting
58
openLCR Service for Caller IQ
“Recharge battery” is 
displayed, “
7” flashes, or the 
handset beeps intermittently.
• Fully charge the battery (p. 9).
“Charge for 6h” and “8” 
are displayed and the handset 
does not work.• The battery has been discharged. Fully 
charge the battery (p. 9).
• Check battery installation (p. 9).
You charged the battery fully, but 
“
Recharge battery” is still 
displayed and/or “
7” continues 
to flash, or “
Charge for 6h” and 
“
8” are displayed.
• Clean...

For assistance, please call openLCR: 1-866-openLCR(1-866-673-6527)59
Useful Information
openLCR Service for Caller IQ
This unit is compatible with services provided by openLCR.
Important:
•If you have any questions regarding the openLCR service, call openLCR’s 
customer service department at 1-866-openLCR(1-866-673-6527).
• NEITHER PANASONIC COMMUNICATIONS CO., LTD. (PCC) NOR 
MATSUSHITA ELECTRIC CORPORATION OF AMERICA (MECA) IS IN ANY 
WAY AFFILIATED WITH, OR RESPONSIBLE FOR THE ACTS OR OMISSIONS 
OF,...

openLCR Service for Caller IQ
60
Downloading Data
You can download the following data to your unit from the openLCR web site.
• Phone book data
• Ringer melodies (Custom ringtone)
• Function setup for your unit
• Information such as weather forecasts, stock quotes, lottery results, sports scores 
and horoscopes (Internet content)
Accessing the openLCR web site can be done from any computer with Internet 
access.
• While downloading from openLCR, “ ” flashes on the base unit display.
To create data on the...