Panasonic Kx Tg2336 Operating Instructions Manual

11For assistance, please call: 1-800-211-PANA(7262)
Preparation
Programmable Settings
Programming Guidelines 
This unit has several programmable functions which can be selected from the 
function menu on the display (p. 12).
How to select a function item from the menu 
• To go back to the previous menu, press Back, or press Select while 
“---(Go back)----” is displayed. If you press this key in the main menu, the 
unit will exit programming mode.
• After programming is complete, the display will return...

Programmable Settings
12
Function Menu Table 
You can use the following functions to customize your unit. See the corresponding 
pages for function details. 
• After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], [*] and [#]) instead of using the soft keys (p. 53
 – 54).
Handset
Main menuSub-menu ISub-menu II
Voice enhancer
Caller IQ
Talk Caller ID
Initial setting
Ringer setting
Store VM access#
VM tone detect
Caller ID edit
Auto talk
Key tone
Set tel line
Message...

Preparation
For assistance, please call: 1-800-211-PANA(7262)13
Programmable Settings
Display Language 
You can select either “English” or “Spanish” as the display language. The factory 
preset is “English”. 
• If you select a language you cannot read, change the display language again 
using direct commands (p. 54).
Dialing Mode 
If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse 
service, set to “Pulse”. The factory preset is “Tone”.
1Press [MENU].
2Scroll to “Initial...

Programmable Settings
14
Line Mode 
The line mode is preset to “B” and generally should not be adjusted. If “Line in 
use” on the handset is not displayed properly or the IN USE indicator on the base 
unit does not light properly, the line mode selection is incorrect. Set line mode to 
“A”. 
Auto Talk 
The Auto Talk feature allows you to answer calls by simply lifting the handset off the 
base unit. You do not need to press [C] or [s]. The factory preset is OFF. 
• In order to view Caller ID information...

Preparation
For assistance, please call: 1-800-211-PANA(7262)15
Programmable Settings
Ringer Volume 
You can select the handset or base unit ringer volumes to high, medium, low, or off. 
The factory preset is HIGH. If the handset and base unit ringer is turned off, the 
handset or base unit will ring at the low level for intercom calls, and will not ring for 
outside calls. Caller names will not be announced even if the Talking Caller ID 
feature is turned on (p. 25, 26).
Handset ringer volume   
• If...

Programmable Settings
16
Base unit ringer volume 
Make sure the base unit is not being used.
To set the ringer volume to high (preset), medium, or low, press 
VOLUME [].
• To increase volume, press VOLUME [>]. 
To decrease volume, press VOLUME [

Preparation
For assistance, please call: 1-800-211-PANA(7262)17
Programmable Settings
Base unit ringer tone 
(use either the handset or the base unit)
Make sure the base unit is not being used.
Setting the base unit ringer tone by using the 
4Select the desired ringer tone by pressing [d] 
or [
B].
• The handset will ring and the ringer tone will 
change. If the ringer volume has been turned off, 
the handset will not ring (p. 15).
• You can also select the ringer tone by pressing [1] 
to [7].
5Press...

Programmable Settings
18
LCD Contrast 
There are 6 levels of LCD contrast. The factory preset is “level 3”. 
Message Alert   
You can select whether or not the Ringer/Message Alert indicator on the handset 
will flash slowly when new messages in your voice mailbox have been recorded 
(p. 44). The factory preset is OFF.
• The Ringer/Message Alert indicator will not flash for new messages while the 
handset is in use.
• The Ringer/Message Alert indicator acts both as a ringer indicator and as a 
message...

Basic Operation
For assistance, please call: 1-800-211-PANA(7262)19
Making Calls
Using the Handset 
To have a hands-free phone conversation  1
Press [C].
•“Talk” is displayed.
2Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display 
will show the length of the call.
3To hang up, press [OFF] or 
place the handset on the base 
unit.
1Press [s].
•“SP-phone” is displayed.
2Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show...

Making Calls
20
To dial after confirming the 
entered number 
To adjust the receiver/
speaker volume during a 
conversation
There are 3 volume levels for the 
receiver and 6 volume levels for the 
speaker. 
To increase volume, press [B]. 
To decrease volume, press [
d].
• The display shows the current volume 
setting.
• If you try to increase/decrease 
volume when it is at the maximum/
minimum level, the handset will beep 
3times.
To redial the last number 
dialedTo redial using the redial 
list (Memory...