Panasonic Kx Tg2336 Operating Instructions Manual

							2.4 GHz Digital Cordless Phone
Operating Instructions
Model No.  KX-TG2336
Pulse-or-tone dialing capability
The unit is Caller ID compatible. To display the caller’s name and phone number, 
you must subscribe to Caller ID service.
PLEASE READ BEFORE USE AND SAVE. 
Panasonic World Wide Web address:  http://www.panasonic.com
for customers in the USA or Puerto Rico
Charge the battery for 6 hours before initial use.
PQQX13986YA.book  1 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							2Thank you for purchasing your new Panasonic cordless 
telephone.
Please read the IMPORTANT SAFETY INSTRUCTIONS on 
page 63 before use. Read and understand all instructions. 
Trademarks: 
openLCR, openLCR.com, and the openLCR logo are the trademarks of 
openLCR.com, Inc.
Accessories (included)
For extra orders, call 1-800-332-5368.
For hearing or speech impaired TTY users, call 1-866-605-1277.  
Caller ID, Call Waiting and Voice Mail Service, where available, are telephone 
company services. After subscribing to Caller ID this phone will display a caller’s 
name and phone number. Call Waiting Caller ID, which displays a second 
caller’s name and phone number while the user is on another call, requires a 
subscription to both Caller ID and Call Waiting with Caller ID Services (CWID). 
After subscribing to Voice Mail Service, this unit will give you visual indication to 
let you know when there are messages in the mailbox.
AAC Adaptor (p. 8)
Order No. PQLV1Z (PQLV1) 
oneATelephone Line Cord (p. 8)
Order No. PQJA10075Z 
one
ABattery (p. 9)
Order No. HHR-P104
oneAHandset Cover (p. 9)
Order No. PQKK10141Z1
one
ABelt Clip (p. 50)
Order No. PQKE10375Z3 
oneAShoulder Rest Attachment (p. 50)
Order No. PQKE10364Z1
one
Attach your purchase receipt here.
PQQX13986YA.book  2 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							3For assistance, please call: 1-800-211-PANA(7262)
For Best Performance
Battery Charge
The handset is powered by a rechargeable Nickel-
Metal Hydride (Ni-MH) battery. Charge the battery 
for 6hours before initial use (p. 9). 
Base Unit Location/Noise
Calls are transmitted between the base unit and handset using wireless radio 
waves. For maximum distance and noise-free operation, the recommended 
base unit location is: 
Note:
• If you use the handset near a microwave oven which is being used, noise may be 
heard from the receiver or the speaker. Move away from the microwave oven and 
closer to the base unit.
• If you use the handset near another cordless phone’s base unit, noise may be 
heard. Move away from the other cordless phone’s base unit and closer to your 
base unit.
Raise the antenna.
Away from electrical appliances such 
as a TV, personal computer or another 
cordless phone.In a HIGH and CENTRAL location 
with no obstructions such as walls.
PQQX13986YA.book  3 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							4
Contents
Location of Controls   . . . . . . .   6
Installation   . . . . . . . . . . . . . . .   8
Connections  . . . . . . . . . . . . .   8
Installing the Battery in the 
Handset  . . . . . . . . . . . . . . .   9
Battery Charge . . . . . . . . . . .   9
Programmable Settings  . . . .   11
Programming Guidelines  . . .   11
Function Menu Table  . . . . .   12
Display Language   . . . . . . .   13
Dialing Mode   . . . . . . . . . . .   13
Line Mode   . . . . . . . . . . . . .   14
Auto Talk  . . . . . . . . . . . . . .   14
Ringer Volume  . . . . . . . . . .   15
Ringer Tone  . . . . . . . . . . . .   16
LCD Contrast  . . . . . . . . . . .   18
Message Alert   . . . . . . . . . .   18
Making Calls  . . . . . . . . . . . . .   19
Using the Handset  . . . . . . .   19
Using the Base Unit  . . . . . .   22
Answering Calls  . . . . . . . . . .   23
Caller ID Service  . . . . . . . . . .   24
Talking Caller ID   . . . . . . . .   25
Using the Caller List   . . . . . .   26
Viewing the Caller List  . . . .   27
Calling Back from the Caller 
List  . . . . . . . . . . . . . . . . . .   27
Editing the Caller’s Phone 
Number   . . . . . . . . . . . . . .   28
Caller ID Number Auto 
Edit   . . . . . . . . . . . . . . . . .   29
Storing Caller Information 
in the Phone Book  . . . . . .   30
Erasing Caller Information  . .   31Phone Book . . . . . . . . . . . . . .  32
Storing Names and 
Numbers   . . . . . . . . . . . . .  32
Dialing from the Phone 
Book  . . . . . . . . . . . . . . . . .  34
Chain Dial . . . . . . . . . . . . . .  35
Editing an Item in the Phone 
Book  . . . . . . . . . . . . . . . . .  36
Erasing an Item in the Phone 
Book  . . . . . . . . . . . . . . . . .  36
Intercom   . . . . . . . . . . . . . . . .  37
Making Intercom Calls  . . . .  37
Answering Intercom Calls   . .  38
Transferring a Call   . . . . . . . .  39
Conference Calls   . . . . . . . . .  41
Call Share   . . . . . . . . . . . . .  41
Voice Mail Service   . . . . . . . .  42
Storing a Voice Mail Access 
Number   . . . . . . . . . . . . . .  42
Setting Voice Mail (VM) Tone 
Detection   . . . . . . . . . . . . .  43
Listening to Voice Mail 
Messages  . . . . . . . . . . . . .  44
Special Features  . . . . . . . . . .  46
Temporary Tone Dialing
(For Rotary or Pulse Service 
Users)   . . . . . . . . . . . . . . .  46
Muting Your Conversation  . .  46
For Call Waiting Service 
Users  . . . . . . . . . . . . . . . .  46
Using the PAUSE Key
(For PBX Line/Long 
Distance Calls)  . . . . . . . . .  47
FLASH Button   . . . . . . . . . .  47
Incoming Call Tone   . . . . . .  48
Key Tone   . . . . . . . . . . . . . .  49
Re-registering the 
Handset   . . . . . . . . . . . . . .  49
Preparation
Basic Operation
Advanced Operation
PQQX13986YA.book  4 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							For assistance, please call: 1-800-211-PANA(7262)5
Contents
Preparation Useful InformationAdvanced Operation Basic OperationBelt Clip  . . . . . . . . . . . . . . . . .  50
Shoulder Rest Attachment   . .  50
Wall Mounting  . . . . . . . . . . . .  51
Optional Headset   . . . . . . . . .  52
Direct Commands  . . . . . . . . .  53
If the Following Appear 
on Your Display...  . . . . . . . .  55
Troubleshooting  . . . . . . . . . .  56
openLCR Service 
for Caller IQ  . . . . . . . . . . . . .  59
Turning Caller IQ on or off  . .  59
Downloading Data   . . . . . . .  60
Important Safety 
Instructions  . . . . . . . . . . . . .  63
FCC and Other Information  . .  64
Index   . . . . . . . . . . . . . . . . . . .  67
Warranty   . . . . . . . . . . . . . . . .  69
Specifications  . . . . . . . . . . . .  71
Useful Information
Important:
Throughout these Operating Instructions,  and  
are used to indicate with which unit an operation can be performed.
: Perform with the handset.
: Perform with the base unit.
  : Perform with the handset and base unit 
separately.
: Perform with the handset and base unit 
together.HandsetBase Unit
Handset
Base Unit
HandsetBase Unit
Handset & Base Unit
PQQX13986YA.book  5 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							6
Location of Controls
Base unit 
CHARGE Indicator (p. 9)  [REDIAL] Button (p. 22)
VOLUME Button [] (p. 16, 22)
MIC (Microphone) (p. 22)[SP-PHONE] (Speakerphone) 
Button and Indicator (p. 22)
[HOLD/CONF] 
(Conference) Button 
(p. 22, 41)
[MUTE] Button (p. 46)
[FLASH/CALL WAIT] 
Button (p. 46, 47)
[LOCATOR/INTERCOM] 
Button (p. 37) Hook (p. 51)
Charge Contacts 
(p. 10)[*] (TONE) Button 
(p. 46)
Antenna 
(p. 3)
Speaker IN USE Indicator (p. 23)[VM] (Voice Mail) Button (p. 45)
VM (Voice Mail) Indicator (p. 44)
PQQX13986YA.book  6 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							Preparation
For assistance, please call: 1-800-211-PANA(7262)7
Location of Controls
Handset
Handset soft keys
• When a function name does not appear above a soft key, the soft key has no 
function.
Handset navigator key
Two soft keys are used to select functions displayed 
directly above each key. Functions displayed above the 
keys will change depending on the state of use.
On this sample display, “(VE)” and “Mute” are 
displayed above soft keys.
Scrolls up [
B] and down [d] the function menu, the 
Caller List and the phone book. 
Increases [
B] or decreases [d] the handset ringer and 
receiver/speaker volumes.
Throughout these Operating Instructions: 
• The soft keys are indicated by what is displayed above the keys. 
Ex. “Press Mute.” indicates “Press the soft key below Mute”.
• The navigator key is indicated by the arrows [
d] or [B].
Antenna
Display
Receiver
Soft Keys (see below)
[OFF] Button 
(p. 11, 19)
[MENU] Button (p. 11)
Navigator Key
([
d], [B]) (see below)
Back side
Spe aker 
Headset Jack (p. 52)
[C] (TALK) Button (p. 19)
[s] (Speakerphone) Button (p. 19)
[*] (TONE) Button (p. 46)
[FLASH/CALL WAIT] 
Button (p. 46, 47)
[REDIAL] Button (p. 20)
Charge Contacts (p. 10)
Microphone (p. 19) [HOLD/INTERCOM] Button 
(p. 20, 37)
Ringer/Message Alert 
Indicator (p. 18, 23)
        J  5Talk
00-00-32
(VE)      Mute
KL
KL
Pressing the right soft key selects mute “Mute”.  L
Pressing the left soft key selects Voice Enhancer “(VE)”. K
L
PQQX13986YA.book  7 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							8
Installation
Connections
• USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to 
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID and voice mail 
services, you cannot access those services.
• The unit will not work during a power failure. We recommend connecting a 
standard telephone to the same telephone line or to the same telephone jack 
using the Panasonic KX-J66 T-adaptor.
Fasten the cords.
Single-Line Telephone Jack (RJ11C)
Telephone Line Cord
Power Outlet 
(AC 120 V, 60 Hz)
AC Adaptor Hooks
PQQX13986YA.book  8 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							Preparation
For assistance, please call: 1-800-211-PANA(7262)9
Installation
Installing the Battery in the Handset
Insert the battery (1), and press it down until it snaps into the compartment (2). 
Close the cover. 
To replace the battery:
Press the notch on the cover firmly and slide it as indicated 
by the arrow. Replace the old battery with a new one 
(p. 10). Close the cover and charge the battery for 6 hours.
Battery Charge 
Place the handset on the base unit. 
Charge for 6 hours before initial use.
• The unit beeps once, the CHARGE indicator 
lights, and “Charging” is displayed. 
• When the battery is fully charged, “Charge 
completed” is displayed.
Battery strength 
You can confirm battery strength 
on the handset display. 
Battery strength is indicated by 
the icons shown in the chart to 
the right. Display promptBattery strength
5Fully charged
6Medium
7Low
074 (flashing) Needs to be recharged.
8Discharged
1
2
OR
CHARGE 
Indicator
PQQX13986YA.book  9 ページ  ２００４年１月２２日　木曜日　午後５時４０分 
						

							Installation
10
Recharge
Recharge the battery when: 
—“Recharge battery” is displayed on the handset,
—“7” flashes, or
—the handset beeps intermittently while it is in use.
• The display will continually indicate “Recharge battery” and/or “7” will 
flash when the handset battery is charged for less than 15 minutes and the 
handset is lifted off the base unit.
• If the battery has been discharged, the handset will display “Charge for 6h” 
and “8” when you place the handset on the base unit. The handset will not 
work unless the battery is charged. Continue charging.
A nickel metal hydride battery that is recyclable powers the 
product you have purchased. Please call 1-800-8-BATTERY for 
information on how to recycle this battery.
Battery information 
• A fully charged battery will give you up to 5 hours of continuous talk time, or keep 
your handset in Standby mode to receive incoming calls for up to 11 days (if no 
phone calls are made). Battery power is consumed whenever the handset is off of 
the base unit, even when the handset is not in use. The longer you leave the 
handset off of the base unit, the time you can actually talk on the handset will be 
shortened. Actual battery performance depends on a combination of how often 
the handset is in TALK mode and how often it is in Standby mode.
• If the battery is fully charged, you do not have to place the handset on the base 
unit until “Recharge battery” is displayed and/or “7” flashes. This will 
maximize the battery life.
• If you want to keep the battery fully charged at all times, place the handset on the 
base unit when the handset is not used. The battery cannot be overcharged.
•Clean the charge contacts of the handset and the base unit with a soft, dry 
cloth once a month. Clean more often if the unit is subject to grease, dust or 
high humidity. Otherwise the battery may not charge properly.
Battery replacement:
If you cleaned the charge contacts and fully charged the battery, but after a few 
telephone calls, “Recharge battery” is displayed and/or “7” continues to 
flash, or “Charge for 6h” and “8” are displayed, the battery may need to 
be replaced. Please order a new Panasonic HHR-P104 battery at the telephone 
number shown on page 2. To replace the battery, see page 9.
After your Panasonic battery 
is fully charged, you can 
expect the following 
performance:
OperationOperating time
While in use (TALK)
Up to 5 hours
While not in use (Standby) Up to 11 days
Recharge battery
PQQX13986YA.book  10 ページ  ２００４年１月２２日　木曜日　午後５時４０分