Panasonic Kx Tg2226 Operating Instructions Manual

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
11 
Programmable Functions 
Programming Guidelines  
This unit has programmable functions. They are selected from the function menu on 
the display (p. 12). 
Buttons/Keys
How to select a function item from the menu 
Make sure the unit is not being used and the handset is lifted off the base 
unit before programming.
Operation Display 
1 
Press  
[MENU] 
 to enter menu mode. 
•The main menu is displayed (p. 12). 
2 
Scroll to the desired...

 
Programmable Functions 
12 
Useful information: 
•If  
Select 
 is pressed while “ 
---(Go back)--- 
” is displayed, the unit will go 
back to the previous menu mode. If you press the key in the main menu, the unit 
will exit programming mode.
•After programming is complete, the display will return to the main menu or the 
sub-menu depending on which menu the selected item is located. (See the menu 
table below.)
•You can exit programming mode any time by pressing  
[OFF] 
.
•If you do not press any...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
13 
Programmable Functions
Date and Time 
 
“” flashes on the base unit display if the clock has not been set. 
Set the clock by following the steps below. 
•When entering the time in step 3, you cannot enter numbers greater than 12.  
Do not use military time. 
 (To set 13:00 hours, enter “0100”, then select “  
PM  
” in 
step 4.) 
  
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Date and time 
” by pressing  
[] 
 or  
[] 
, then press  
Select...

 
Programmable Functions 
14 
To check the date/time, 
 repeat steps 1 and 2 on page 13.  
•The current date/time is displayed. When finished, press  
[OFF] 
. 
Display Language  
You can select either ENGLISH or SPANISH as the display language. The factory 
preset is ENGLISH.  
For Caller ID service users (p. 26) 
•Caller ID information will reset the clock after the first ring if the adjusted time is 
incorrect.
•If the time has not previously been set, Caller ID information will not adjust the 
clock....

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
15 
Programmable Functions
Dialing Mode 
 
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set 
dialing mode to “Pulse”. The factory preset is “Tone”. 
Line Mode  
The line mode is preset at the factory to “B”. Generally leave the line mode “B”. 
If a change of the line mode setting is required by our customer call center or 
service person, change the line mode to “A”. 
1 
Press  
[MENU] 
. 
2 
Scroll...

 
Programmable Functions 
16 
Voice Enhancer Technology  
Voice Enhancer Technology ( ) helps clarify and improve sound reception 
creating a natural-sounding voice that is easy to hear and understand. 
This is accomplished by enhancing the frequency that is narrowed through the 
telephone line and comes pre-set to OFF at the factory.
Under normal conditions, cordless phones are limited to a narrowed frequency 
bandwidth (300Hz to 3.5KHz). Panasonic’s new Voice Enhancer Technology 
cordless phones are...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
17 
Programmable Functions
Auto Talk 
 
The Auto Talk feature allows you to answer a call by lifting the handset off the base 
unit without pressing 
  
[] 
 or  
[] 
. To use this feature, turn the feature ON. The 
factory preset is OFF. 
•In order to view Caller ID information after you lift up the handset to answer a call, 
leave the Auto Talk feature OFF. 
LCD Contrast  
You can select the handset LCD contrast (5 levels). The factory...

 
Programmable Functions 
18 
Ringer Volume 
You can select the handset or base unit ringer volume HIGH, MEDIUM, LOW or 
OFF. The factory preset is HIGH. If set to OFF, the handset or base unit will not ring.
 
•If set to OFF, the handset displays “ 
Ringer off 
” while not in use. But if there are 
missed calls and the handset is off the base unit, the handset will not display 
“ 
Ringer off 
”.
•You can select the ringer volume while an external call is being received. Press  
[] 
 or  
[] 
 while the...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
19 
Programmable Functions
Ringer Tone  
You can select one of 6 ringer tones for external calls on the handset and the base 
unit. The factory preset is 1.  
Preparing the Answering System 
Greeting Message  
You can record a personal greeting message of  
up to 2 minutes 
. If you do not 
record your own message, one of two pre-recorded greetings will be played for 
callers (p. 21). 
1 
Press  
[MENU] 
. 
2 
Press  
Select 
 at “...

 
Preparing the Answering System 
20 
To record a greeting message 
•If “” is shown on the base unit display and 6 beeps sound, your greeting is not 
recorded correctly. Record it again. 
To check the greeting 
Press  
[GREETING CHECK] 
. 
•The greeting will be played. 
To erase the greeting 
Press  
[GREETING CHECK] 
, then 
press  
[ERASE] 
 while the recorded 
message is being played. 
•The unit will answer calls with a 
pre-recorded greeting (p. 21). 
Sample greeting message 
“Hello, this is (your...