Panasonic Kx Tg2226 Operating Instructions Manual

 
41 
For assistance, please call: 1-800-211-PANA(7262) 
Answering System
 
Automatic Answering Operation 
Monitoring incoming calls 
While a call is being recorded, you can monitor it through the base unit speaker. 
• To increase the speaker volume, press  
VOL. 
  
[] 
. To decrease volume, press  
VOL. 
  
[] 
.
To answer the call, press  
[] 
 or  
[] 
 on the handset. The unit will stop recording. 
Listening to Messages 
You can see the total number of recorded messages on the base unit display....

 
Listening to Messages 
42 
Using the Handset (Remote Operation)  
To play back messages   
* If you press  
[STOP] 
 on the base unit during message playback, operation is 
stopped. To resume the playback, press  
[MESSAGE/SLOW TALK] 
 on the base 
unit within 15 seconds, or the voice menu will start (see below).
• If noise interferes with the message playback: 
— during playback using  
[] 
, press  
[] 
 (Channel).
— during playback using  
[] 
, press  
[] 
 (Channel).
The unit selects a clearer...

 
Listening to Messages 
Answering System
 
For assistance, please call: 1-800-211-PANA(7262) 
43  
During playback 
To adjust the 
speaker volume 
Base unit or Handset: 
To increase volume, press  
[] 
. 
To decrease volume, press  
[] 
. 
• You can also adjust the receiver volume on the handset. 
To slow down the 
playback speed 
(Slow Talk 
Message 
Playback) 
Base unit: 
Press  
[MESSAGE/SLOW TALK] 
. 
Handset: 
Press  
[3] 
. 
• To return to normal speed, press  
[MESSAGE/
SLOW TALK] 
 on the base...

 
44 
Erasing Messages 
The unit will announce the remaining recording time after playback, if it is less than 
3 minutes. New messages cannot be recorded when:
—“ 
Memory full 
” is heard.
—“ ” is displayed on the base unit.
—the ANSWER ON indicator flashes rapidly (when the Answering System is on).
Erase unnecessary messages. We recommend you erase unnecessary messages 
after each playback. 
Erasing a specific message 
 
Press  
[ERASE] 
 while the message you want to erase is being played.
 Press  
[ ]...

 
45 
For assistance, please call: 1-800-211-PANA(7262) 
Answering System
 
Remote Operation from a Touch Tone Phone
 
You can operate the Answering System from any touch tone phone. 
A synthesized voice menu will guide you through the Answering System (p. 46).
• To skip the voice menu and operate the unit directly, see page 47. 
Summary of remote operation 
Remote Code  
The remote code prevents unauthorized people from accessing your unit and 
listening to your messages. Choose any  
2-digit number...

 
46 
Remote Operation from a Touch Tone Phone
Voice Menu
 
The shaded boxes are voice prompts.
• 3 seconds after playback, the voice menu will start again from the beginning.
• The unit will announce the remaining recording time after playback if it is less than 
3 minutes.
• If you hear “ 
Memory full 
” after playback, erase unnecessary messages (p. 47).
• If you do not press any buttons within 10 seconds after a voice prompt, “ 
Thank you 
for your call. 
” will be heard and the call will be...

 
Remote Operation from a Touch Tone Phone 
Answering System
 
For assistance, please call: 1-800-211-PANA(7262) 
47 
Direct Remote Operation 
Once you have entered the remote code, you can also control your unit by direct 
commands instead of using the voice menu. To end remote operation, hang up 
anytime. 
Direct commands
To turn on the Answering System 
Call your unit and wait for 15 rings. 
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or...

 
48 
Wall Mounting 
This unit can be mounted on a wall phone plate. 
1 
Feed the AC adaptor cord through the wall mounting adaptor. 
Connect the AC adaptor.  
2 
Tuck the telephone line cord inside the wall mounting adaptor ( ). 
Connect the telephone line cord ( ) to the unit. 
3 
Insert (  
A  
) and (  
B  
) hooks on the wall mounting adaptor into the holes on 
the base unit.
To Power 
Outlet
1
2
1
2
AB 

 
Wall Mounting 
Useful Information
 
For assistance, please call: 1-800-211-PANA(7262) 
49  
4 
Adjust the adaptor to hold the base unit, then push it in the direction of 
the arrow until it clicks into place. 
5 
Connect the telephone line cord. Mount the unit, then slide down. 
• Raise the antenna. 
6 
To charge the handset battery: 
Place the handset on the base unit. 
• The IN USE/CHARGE indicator lights and the unit beeps once. 
To remove the wall mounting adaptor 
While pushing down the levers (...

 
50 
Belt Clip 
You can hang the handset on your belt or pocket using the included belt clip. 
To attach the belt clip To remove the belt clip 
Headset 
Connecting the headset to the handset allows hands-free phone conversation. 
Connecting the headset to the handset 
Open the headset jack cover, and insert the headset plug into the headset jack as 
shown below.
VOLUME
Headset Jack Earpiece
Ear Rest
Microphone[MUTE]
Clip
VOLUME Control Back side
Loud