Panasonic Kx Tg2224 Operating Instructions Manual

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
21 
Preparing the Answering System
Number of Rings 
 
You can select the number of times the unit rings before the Answering System 
answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.   
1 
Follow steps 1 to 3 of “Caller’s Recording 
Time” on page 20. 
2 
Press  
Select 
 at “ 
Number of rings 
”. 
3 
Select the number of rings by pressing  
[] 
 or  
[] 
. 
•You can also select the number of rings by 
pressing...

 
22 
Making Calls 
To have a hands-free phone conversation  
• If the handset has lost communication with the base unit, the handset beeps 
3 times and “  
No link to base. Place on cradle and try again.  
” is 
displayed.
• If   
[]  
,   
[]  
 or any other buttons except   
[MUTE]  
 and   
[OFF]  
 is pressed while the 
handset is on the base unit, the handset beeps 3 times and “  
Please lift up 
and try again.  
” is displayed. Lift the handset and press the button again. 
1 
Press  
[] 
. 
•“...

 
Making Calls 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
23  
To dial after confirming the 
entered number
If noise interferes with the 
conversation 
Have the unit select a clearer 
channel by doing one of the 
following:
Press  
[] 
 (Channel) if talking 
using  
[] 
,
press  
[] 
 (Channel) if talking 
using  
[] 
, or
press  
CH 
, which is displayed when 
you adjust receiver or speaker 
volume (p. 24).
OR
Walk closer to the base unit. 
To redial the last number 
dialed...

 
Making Calls 
24 
To adjust the receiver/speaker volume while talking 
3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for 
the speaker. 
To increase volume, press  
[] 
. 
To decrease volume, press  
[] 
. 
• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at 
the maximum/minimum level, the handset will beep 
3 times. 
Backlit LCD display 
The lighted display of the handset will stay on for a few seconds after pressing a...

 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
25 
Answering Calls 
When a call is received, the unit rings and “ 
Incoming call 
” is displayed, and the 
Ringer indicator on the handset and the IN USE/CHARGE indicator on the base 
unit flash rapidly. If you subscribe to a Caller ID service, see page 26. 
  
• When the ringer volume is set to OFF, the unit will not ring (p. 17). 
1 
Press  
[] 
 or  
[] 
. 
• You can also answer a call by pressing 
any button except  
[] 
,  
[]...

 
26 
Caller ID Service 
This unit is compatible with Caller ID services offered by your telephone company. 
If you subscribe to Caller ID, the caller’s name and phone number will be displayed 
and recorded in the Caller List. 
How caller information is displayed when a call is 
received 
When a call comes in, the unit will ring and caller ID 
information will be received. Once caller ID information is 
received, the handset display shows the caller’s 
information. 
• After you answer the call, the...

 
27 
For assistance, please call: 1-800-211-PANA(7262) 
Cordless Telephone
 
Using the Caller List 
The unit can record information up to 30 different callers and store this information 
in the Caller List. Caller information is sorted by the most recent call to the oldest. 
When the 31 
st
 
 call is received, the information from the 1 
st
 
 call is deleted. 
The unit will also tell you how many calls you missed while you were out or 
unavailable to answer the phone. 
Viewing the Caller List    
• If...

 
Using the Caller List 
28 
What “ 
√ 
” means 
“ 
√ 
” indicates you have already viewed this calling 
information, answered the call, called back the caller or 
played back the message (p. 41, 42). If the same caller 
calls again, the call entry with “ 
√ 
” will be replaced with the 
new call entry. 
If a caller calls more than once 
The number of times the same caller called is displayed 
(“ 
X2 
” to “ 
X9 
”). The date and time of the most recent call 
will be recorded. After viewing a caller’s...

 
Using the Caller List 
Cordless Telephone
 
29 
For assistance, please call: 1-800-211-PANA(7262) 
Editing the Caller’s Phone Number  
You can edit a phone number in the Caller List to call it back or store it in the phone 
book.   
Caller ID Number Auto Edit Feature (p. 30) 
This feature allows the unit to edit a Caller ID number into one of 3 patterns 
automatically in the Caller List. For details and activation, see page 30. 
1 
Press  
Rcvd calls 
 to enter the Caller List. 
• You can also enter by...

 
Using the Caller List 
30 
Caller ID Number Auto Edit Feature  
There are 3 patterns of phone number ( ,   and  , p. 29). This feature allows 
your phone to automatically edit an in-coming Caller ID number into a pattern of 
your choice, and display the Caller ID number with that pattern.
After this feature is activated, Caller ID numbers coming from specific area codes 
(201, for example), from which the Caller ID numbers have been chosen to follow 
the desired pattern (7-digit pattern, for example),...