Panasonic Kx Tg2214 Operating Instructions Manual

 
Preparation
 
Programmable Functions 
11 
For assistance, please call: 1-800-211-PANA(7262) 
Useful information: 
• If   
Select  
 is pressed while “  
---(Go back)---  
” is displayed, the unit will go 
back to the previous menu mode. If you press the key in the main menu, the unit 
will exit programming mode.
• After programming is complete, the display will return to the main menu or the 
sub-menu depending on which menu the selected item is located. (See the menu 
table below.)
• You can exit...

 
Programmable Functions 
12 
Display Language 
You can select either ENGLISH or SPANISH as the display language. The factory 
preset is ENGLISH.  
Dialing Mode 
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set 
dialing mode to “Pulse”. The factory preset is “Tone”. 
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Initial setting 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
. 
3 
Scroll to “ 
Change language 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
. 
4...

 
Preparation
 
Programmable Functions 
13 
For assistance, please call: 1-800-211-PANA(7262) 
Voice Enhancer Technology 
Voice Enhancer Technology ( ) helps clarify and improve sound reception 
creating a natural-sounding voice that is easy to hear and understand. 
This is accomplished by enhancing the frequency that is narrowed through the 
telephone line and comes pre-set to OFF at the factory.
Under normal conditions, cordless phones are limited to a narrowed frequency 
bandwidth (300Hz to 3.5KHz)....

 
Programmable Functions 
14 
Auto Talk 
The Auto Talk feature allows you to answer a call by lifting the handset off the base 
unit without pressing 
  
[] 
 or  
[] 
. To use this feature, turn the feature ON. The 
factory preset is OFF. 
•In order to view Caller ID information after you lift up the handset to answer a call, 
leave the Auto Talk feature OFF. 
LCD Contrast 
You can select the handset LCD contrast (5 levels). The factory preset is level 3.  
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Initial...

 
Preparation
 
Programmable Functions 
15 
For assistance, please call: 1-800-211-PANA(7262) 
Ringer Volume 
You can select the handset ringer volume HIGH, MEDIUM, LOW or OFF. 
The factory preset is HIGH. If set to OFF, the handset will not ring. 
• If set to OFF, the handset displays “  
Ringer off  
” while not in use. But if there are 
missed calls and the handset is off the base unit, the handset will not display 
“  
Ringer off  
”.
• You can select the ringer volume while an external call is being...

 
Programmable Functions 
16 
Ringer Tone 
You can select one of 6 ringer tones for external calls on the handset. 
The factory preset is 1.  
Line Mode 
The line mode is preset at the factory to “B”. Generally leave the line mode “B”. 
If a change of the line mode setting is required by our customer call center or 
service person, change the line mode to “A”. 
1 
Press  
[MENU] 
. 
2 
Press  
Select 
 at “ 
Ringer setting 
”. 
3 
Scroll to “ 
Ringer tone 
” by pressing  
[] 
 or  
[] 
, then press...

 
Basic Operation
 
17 
For assistance, please call: 1-800-211-PANA(7262) 
Making Calls 
To have a hands-free phone conversation  
• If the handset has lost communication with the base unit, the handset beeps 
3 times and “  
No link to base. Place on cradle and try again.  
” is 
displayed.
• If   
[]  
,   
[]  
 or any other buttons except   
[MUTE]  
 and   
[OFF]  
 is pressed while the 
handset is on the base unit, the handset beeps 3 times and “  
Please lift up 
and try again.  
” is displayed....

 
Making Calls 
18 
To dial after confirming the 
entered number 
If noise interferes with the 
conversation 
Have the unit select a clearer 
channel by doing one of the 
following:
Press  
[] 
 (Channel) if talking 
using  
[] 
,
press  
[] 
 (Channel) if talking 
using  
[] 
, or
press  
CH 
, which is displayed when 
you adjust receiver or speaker 
volume (p. 19).
OR
Walk closer to the base unit. 
To redial the last number 
dialed 
Press  
[] 
 or  
[] 
, then press  
[REDIAL] 
. 
To redial using the...

 
Basic Operation
 
19 
For assistance, please call: 1-800-211-PANA(7262) 
Making Calls 
To adjust the receiver/speaker volume while talking 
3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for 
the speaker.  
To increase volume, press  
[] 
. 
To decrease volume, press  
[] 
. 
• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at 
the maximum/minimum level, the handset will beep 
3 times. 
Backlit LCD display 
The lighted...

 
20 
Caller ID Service 
This unit is compatible with Caller ID services offered by your telephone company. 
If you subscribe to Caller ID, the caller’s name and phone number will be displayed 
and recorded in the Caller List. 
How caller information is displayed when a call is received 
When a call comes in, the unit will ring and caller ID 
information will be received. Once caller ID information is 
received, the handset display shows the caller’s 
information.
• After you answer the call, the display...