Panasonic Kx Tg1061 Operating Instructions Manual

Programming
21For assistance, please visit http://www.panasonic.com/help
Handset
Main menuSub-menu 1Sub-menu 2Page
Caller list
W ––2
8
Answering device
s Play new msg.
–33
Play all msg. –33
Erase all msg.
*1–3 3
Greeting Record greeting*131
Check greeting 32
Pre-recorded
*132
Settings Ring count*135
Recording time*135
Remote code*134
Screen call 31
Answer on
*1–3 1
Answer off*1–3 1
Intercom
x ––3
8
Initial setting
 Ringer setting Ringer volume
14
Ringer tone –
Silent mode
– On / Off
– Start / End 25
Set...

Programming
22For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to program the same item 
using another unit.
Programming using the direct commands
1
{ MENU } i  {#}
2Enter the desired feature code.
3{V} /{^} : Select the desired setting.  i { SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press  {■ }(EXIT) on the base unit or  {OFF}  on the handset.
Note:
L The operating...

Programming
23For assistance, please visit http://www.panasonic.com/help
YMessage alert {3 }{4 }{0} On
 –36
Y Play all msg.
(msg.: messages) {
3 }{2 }{4} –– 33
Y Play new msg.
(msg.: messages) {
3 }{2 }{3} –– 33
Y Pre-recorded
(Reset to pre-recorded 
greeting) {
3 }{0 }{4} – r32
Y Record greeting {3 }{0 }{2} – r31
Y Recording time {3 }{0 }{5} 1min

Greeting only r
35
Y Register handset {1 }{3 }{0} –– 27
Y Remote code {3 }{0 }{6}  r34
Y Ring count {2 }{1 }{1} Toll saver
2–7  rings < 4> r
35
= /Y Ringer...

Programming
24For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item using another unit.
*2 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the 
handset to answer a call, turn off this feature.
*3 The base unit and handset can display the Internet address where you can download the operating  instructions or get further information for this product, using your...

Programming
25For assistance, please visit http://www.panasonic.com/help
Special programming
Silent mode
Silent mode allows you to select a period of time 
during which the base unit and/or handset will not 
ring for outside calls. This feature is useful for time 
periods when you do not want to be disturbed, for 
example, while sleeping. Silent mode can be set 
independently for each base unit and handset.
Important:
LSet the date and time beforehand (page 12).
L Handset only:  If you have set the...

Programming
26For assistance, please visit http://www.panasonic.com/help
Call block (Caller ID subscribers 
only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone number stored in the call block list as unwanted (“Storing 
unwanted callers”, page 26).
– the unit receives a call without phone number  (“Block calls without phone number”, page 26).
When a call is received, the unit rings for a short 
time while the caller is being identified. If the unit 
recognizes...

Programming
27For assistance, please visit http://www.panasonic.com/help
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base 
unit.
Important:
LSee page 4 for information on the available 
model.
Registering a handset to a base unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is not 
registered to the base unit, re-register the handset.
1Handset:
{MENU } i  {#}{1 }{3}{0}
2Base unit:
Press and hold {...

Caller ID Service
28For assistance, please visit http://www.panasonic.com/help
Using Caller ID service
Important:
LThis unit is Caller ID compatible. To use Caller 
ID features, you must subscribe to a Caller ID 
service. Contact your  service provider/
telephone company for details.
Caller ID features
When an outside call is being received, the caller’s 
name and phone number are displayed.
Caller information for the last 50 callers is logged in 
the caller list from the most recent call to the...

Caller ID Service
29For assistance, please visit http://www.panasonic.com/help
Editing a caller’s phone number 
before calling back
You can edit a phone number in the caller list by 
removing its area code and/or the long distance 
code “1”.
1Proceed with the operation for your unit.
Base unit: { CID }
Handset:  { MENU } i  {V} /{^} : “Caller 
list”  i  { SELECT }
2{V}/{^} : Select the desired entry.
3Press  {EDIT } repeatedly until the phone 
number is shown in the desired format.
4Proceed with the...

Caller ID Service
30For assistance, please visit http://www.panasonic.com/help
Erasing selected caller information
1
Proceed with the operation for your unit.
Base unit: { CID }
Handset:  { MENU } i  {V} /{^} : “Caller 
list”  i  { SELECT }
2{V}/{^} : Select the desired entry.
3{ERASE } (soft key)  i {V} /{^} : “Yes ” i  
{ SELECT }
4Proceed with the operation for your unit.
Base unit:  { ■ } (EXIT)
Handset:  { OFF}
Erasing all caller information
1
Proceed with the operation for your unit.
Base unit:  {...