Panasonic Kx Td500 User Manual

DSS Console Features
User Manual531
5.2.23 One-Touch Dialing
The stored number is dialed automatically by pressing a programmed DSS or PF button.
PT and DSS Console
Lift the handset or press
SP-PHONE/NOMITOR.Press the desired
DSS or PF button.
[DSS Console]
or [Paired telephone](DSS) (PF) 

DSS Console Features
532User Manual
5.2.24 One-Touch Access for System Features
You can access system features by pressing a programmed DSS or PF button.
PT and DSS Console
Lift the handset or press
SP-PHONE/NOMITOR.Press the desired
DSS or PF button.
[DSS Console]
or [Paired telephone]
(DSS) (PF) 

DSS Console Features
User Manual533
5.2.25 Call Transfer
A call can be transferred to an extension by using the DSS button.
One-Touch Transfer
An outside call can be transferred to an extension with a One-Touch operation.
 The One-Touch Transfer function must be set by System Programming.
Programming Guide References
2.8 System Option
– Pressing DSS key operation in CO talking
PT and DSS Console
Press TRANSFER.
TRANSFER
Press the desired DSS button.
[DSS Console] [Paired telephone]
During  a...

DSS Console Features
534User Manual
5.2.26 ANSWER and RELEASE Buttons Operation
The DSS Console for Attendant KX-T7441 is provided with the ANSWER button and the 
RELEASE button which are useful for operators who use headsets.
For other DSS Consoles, ANSWER button and RELEASE button can be assigned to a DSS or 
PF button.
With the ANSWER button, you can answer all incoming calls to the paired telephone.
With the RELEASE button, you can disconnect the line during or after a conversation or 
complete a...

DSS Console Features
User Manual535
One-Touch Transfer
Programming Guide References
2.8 System Option
– Pressing DSS Key Operation in CO talking
PT and DSS Console
Press the desired DSS button.
During  a conversation with the headset or handset;
Press RELEASE.
RELEASE
  The other party is placed on hold and the
destination is called immediately.
(DSS) 

DSS Console Features
536User Manual
5.2.27 Monitoring an outside line activity
You can monitor the activity of an outside line by assigning an S-CO button (Section 
5.2.17 Single-CO (S-CO) Button (Assignment)) or a G-CO button (Section 5.2.8 Group-
CO (G-CO) Button (Assignment)) or both.
Conditions
This feature is not available for the DSS Console connected to a PLC or HLC card.
This feature is available for the DSS Console connected to a DLC or DHLC card whose 
LPR version is 1 or above.
You can...

Appendix
User Manual537
Section 6
Appendix 

Appendix
538User Manual
6.1 Appendix
6.1.1 Display Examples
Due to the Bilingual Display Selection Feature, you can select the display in English or French. 
The left part is the English display and the right part is the French display.
English Display French Display Description
Set Time & Date REGLER HEUR/DATEFactory setting.
— Shown on the managers display only.
FRI JAN01 12:00A VEN JAN01 12:00AThe current date and time are not set.
— Pressing   while on-hook alternates 
between this display and the...

Appendix
User Manual539
Account COMPTEConfirm key programming on the Account 
button.
Alarm  10:15AM AVERT. 10:15AMComplete to set or called by Timed 
Reminder (one-time mode).
Confirm Timed Reminder programming.
Alarm 10:15AM* AVERT. 10:15AM*Complete to set or called by Timed 
Reminder (everyday mode).
Confirm Timed Reminder programming.
Alarm Cancelled AVERT. ANNULECancel Timed Reminder.
Alarm Not Stored AVERT. NON REGLEConfirm Timed Reminder programming 
when it is not stored.
 All Call Page RECH INT...

Appendix
540User Manual
 10101 & 10102  10101 & 10102Conference with two CO lines.
Called by hold recall. — Conference, 
Unattended
 10101:  Free  10101:  LIBRECalled by Camp-On (CO line recall).
10301:AB COMPANY 10301:AB COMPANYReceived a CO call with a Caller ID; the CO 
line number and the CO line name are 
assigned.
Conference CONFERENCEConfirm key programming on the Conference 
button.
 CO in Use  LR OCCUPEEThe selected CO line is busy.
CO Not Assigned LR NON ASSIGNEEThe desired CO line is...