Panasonic Kx Taw848 Programing Manual

2.11 [5] Optional Device
PC Programming Manual 381
Value Range
3–16
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
Timed Reminder Message - Day, Lunch, Break, Night
Specifies the prerecorded message to play when a Timed Reminder call is answered in each time 
mode.
Default
None
Value Range
None, 1–32
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.11.4 [5-3-2]...

2.11 [5] Optional Device
382 PC Programming Manual
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.11.4 [5-3-2] Voice Message—DISA Message
Programming Manual References
None
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
1.12.1 OGM (Outgoing Message)
Name
Specifies the name of the OGM.
Default
DISA 01–DISA 32
Value Range
Max. 20 characters
Maintenance Console Location
2.11.4 [5-3-2] Voice Message—DISA Message
Programming Manual References
None
Feature...

2.11 [5] Optional Device
PC Programming Manual 383
Programming Manual References
None
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
1.12.1 OGM (Outgoing Message)
Busy / DND Message No.
Selects the OGM to be played for the caller when the destination party is busy or sets DND.
Default
None
Value Range
None, 1–32
Maintenance Console Location
2.11.4 [5-3-2] Voice Message—DISA Message
Programming Manual References
2.11.3 [5-3-1] Voice Message—DISA System
Feature Manual References
1.4.6...

2.11 [5] Optional Device
384 PC Programming Manual
2.11.5 [5-3-3] Voice Message—SVM
Settings related to the SVM cards can be specified, for use with the Simplified Voice Message feature.
SVM Card No. 1, 2—Slot No.
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Card No. 1, 2—Floating Extension...

2.11 [5] Optional Device
PC Programming Manual 385
Default
Card No. 1: Voice Msg 1
Card No. 2: Voice Msg 2
Value Range
Max. 20 characters
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
Recording Mode
Specifies the sound quality of messages recorded on the SVM card. Increasing the recording quality 
reduces the total length of recording time available on the card.
Default
Middle
Value Range...

2.11 [5] Optional Device
386 PC Programming Manual
Value Range
Disable, Enable
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM
Programming Manual References
2.10.7 [4-1-6] Wired Extension—Simplified Voice Message
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call 
when an extension user records a...

2.11 [5] Optional Device
PC Programming Manual 387
SVM Cyclic Tone Option—Tone On Maximum Time
Specifies the maximum duration of the cyclic tone that will be recognised by the PBX. When the tone 
sent from the telephone company is shorter than the value set here, the PBX recognises it as a tone-
on.
Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to 
Option.
To change SVM Cyclic Tone Option, follow the steps below:
1.Change SVM Cyclic Tone Option.
2.Set the...

2.11 [5] Optional Device
388 PC Programming Manual
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Cyclic Tone Option—Repeating Times of On/Off for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to 
establish reception of the cyclic tone. This determines the end of call.
Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to 
Option.
Default
3
Value Range
3–16
Maintenance Console...

2.11 [5] Optional Device
PC Programming Manual 389
Physical Location—Slot
Indicates the slot position (reference only).
Default
Current slot and sub-slot number.
Value Range
Slot number
Maintenance Console Location
2.11.6 [5-4] External Relay
Programming Manual References
None
Feature Manual References
1.5.8 External Relay
Physical Location—Port
Indicates the por t number (reference only).
Default
Current port number.
Value Range
Port number
Maintenance Console Location
2.11.6 [5-4] External Relay...

2.11 [5] Optional Device
390 PC Programming Manual
Maintenance Console Location
2.11.6 [5-4] External Relay
Programming Manual References
None
Feature Manual References
1.5.8 External Relay
Relay Activate Time
Specifies the length of time that the relay stays on when activated.
Default
5 s
Value Range
1–7 s
Maintenance Console Location
2.11.6 [5-4] External Relay
Programming Manual References
None
Feature Manual References
1.5.8 External Relay
COS Number
Specifies the Class of Service (COS) number. COS...