Panasonic Kx Taw848 Programing Manual

2.11 [5] Optional Device
PC Programming Manual 391
1.5.8 External Relay
1.9.12 Internal Call Block
2.11.7 [5-5] External Sensor
Settings related to external sensors can be programmed.
To assign destinations for sensor calls easily, click Extension Number of Destination Setting (see 
2.1.6 Extension Number Setting).
External Sensor No.
Indicates the number of the external sensor (reference only).
Default
Current external sensor number.
Value Range
1–4
Maintenance Console Location
2.11.7 [5-5] External...

2.11 [5] Optional Device
392 PC Programming Manual
Physical Location—Port
Indicates the port number (reference only).
Default
Current port number.
Value Range
Port number
Maintenance Console Location
2.11.7 [5-5] External Sensor
Programming Manual References
None
Feature Manual References
1.5.9 External Sensor
Name
Specifies the sensor name.
Default
Sensor
Value Range
Max. 20 characters
Maintenance Console Location
2.11.7 [5-5] External Sensor
Programming Manual References
None
Feature Manual References...

2.11 [5] Optional Device
PC Programming Manual 393
Maintenance Console Location
2.11.7 [5-5] External Sensor
Programming Manual References
None
Feature Manual References
1.5.9 External Sensor
Tenant No.
Specifies the tenant to which the sensor belongs, to determine the Time Table for the sensor. (The 
tenant number corresponds to the Time Table number.)
Default
1
Value Range
1–8
Maintenance Console Location
2.11.7 [5-5] External Sensor
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual...

2.12 [6] Feature
394 PC Programming Manual
2.12 [6] Feature
2.12.1 [6-1] System Speed Dial
The System Speed Dialing Table is used to store frequently dialed numbers as well as callers who 
should be automatically routed to certain extensions when they call (Calling Line Identification [CLI] 
distribution). The System Speed Dialing Table is available for all extension users when making or 
receiving a call.
A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can 
be...

2.12 [6] Feature
PC Programming Manual 395
Feature Manual References
1.16.4 Speed Dialing, System
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone 
number are routed. If a Caller ID Modification Table is being used, the modified number must match 
the telephone number above (CO Line Access Number + Telephone Number) in order for the call 
to be routed correctly.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance...

2.12 [6] Feature
396 PC Programming Manual
Value Range
Max. 6 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.2 [6-2] Caller ID Modification
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.12.1 [6-1] System Speed Dial
Feature Manual References
1.3.1 Caller ID
Removed Number of Digits
Specifies the number of digits to be removed from the beginning of the incoming callers number.
Default
Local / International Call Data 1–10: 3
Long...

2.12 [6] Feature
PC Programming Manual 397
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.12.1 [6-1] System Speed Dial
Feature Manual References
1.3.1 Caller ID
2.12.3 [6-3] Verification Code
A verification code is used to override the Toll Restriction (TRS) of the extension in use to make a 
certain CO line call, or to identify the call for accounting and billing purposes.
A maximum of 1000 verification codes can be programmed with other related...

2.12 [6] Feature
398 PC Programming Manual
Programming Manual References
None
Feature Manual References
1.19.1 Verification Code Entry
Verification Code PIN
Specifies the PIN to be entered when making a CO line call with the verification code.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9)
Maintenance Console Location
2.12.3 [6-3] Verification Code
Programming Manual References
None
Feature Manual References
1.19.1 Verification Code Entry
WARNING
There is a risk that fraudulent...

2.12 [6] Feature
PC Programming Manual 399
Maintenance Console Location
2.12.3 [6-3] Verification Code
Programming Manual References
2.8.11 [2-7-1] Class of Service—COS Settings
Feature Manual References
1.3.16 COS (Class of Service)
1.19.1 Verification Code Entry
Itemized Billing Code for ARS
Specifies the itemized billing code used by the ARS feature for identifying calls made with a 
verification code for accounting and billing purposes.
Default
Not stored.
Value Range
Max. 10 digits (consisting of...

2.12 [6] Feature
400 PC Programming Manual
Maintenance Console Location
2.12.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Manual References
1.13.4 Pause Insertion
Pause Repeating Counter
Specifies the number of pauses to be inserted when waiting for the second dial tone.
Default
1
Value Range
0–20
Maintenance Console Location
2.12.4 [6-4] Second Dial Tone
Programming Manual References
None
Feature Manual References
1.13.4 Pause Insertion
2.12.5 [6-5] Absent Message
When a display...