Panasonic Kx Ta824 Feature Guide

Feature Guide 11
CPC Signal Detection—Outgoing [421] .........................................................................................................197
Disconnect Time [422] ...................................................................................................................................198
CO Line Ring Tone Pattern [423] ...................................................................................................................198
Local Carrier-based Voice Mail...

12 Feature Guide
Doorphone Chime Pattern [712]....................................................................................................................217
SMDR RS-232C Parameter [800]..................................................................................................................217
SMDR Parameter [801] .................................................................................................................................218
Incoming/Outgoing Call Selection for...

Feature Guide 13
Section 1
Call Handling Features 

1.1 Incoming Call Features
14 Feature Guide
1.1 Incoming Call Features
1.1.1 Incoming Outside (CO) Line Call Features
1.1.1.1 Direct In Line (DIL)
Description
Directs incoming outside (CO) line calls to a preprogrammed destination based on the outside (CO) line 
carrying the call. Each outside (CO) line can have a different destination for each time service mode. 
 
[Programming Example: DIL Table]
The table can be programmed for each outside (CO) line.
In this example: 
If an outside (CO) line call is...

1.1 Incoming Call Features
Feature Guide 15
1.1.1.2 Intercept Routing
Description
Redirects incoming outside (CO) line calls via the Direct Inward System Access (DISA) feature to a 
preprogrammed destination when the original destination does not, or cannot, answer the call. There are 2 
types of Intercept Routing, described below.
Feature Guide References
1.14.6 Direct Inward System Access (DISA)
1.14.7 Built-in Voice Message (BV)
Ty p eDescription
No Dial/OGMAfter hearing a dial tone (short beep) or an...

1.1 Incoming Call Features
16 Feature Guide
1.1.2 Internal Call Features
Description
There are 2 types of internal calls, described below.
FeatureDescriptionDetails in
Intercom CallA call from one extension to another. 1.5.1.1 Intercom 
Call
Doorphone CallA call made from a doorphone to its preprogrammed destination 
for the current time service mode, assigned to the doorphones 
port (
 2.2.3 Time Service).
 1.14.1 
Doorphone Call 

1.1 Incoming Call Features
Feature Guide 17
1.1.3 Incoming Call Indication Features
1.1.3.1 Incoming Call Indication Features—OVERVIEW
Description
Extension telephones can indicate an incoming call in various ways, described below.
Indication TypeFeatureDescriptionDetails in
Ring/No RingOutside (CO) Line 
Ringing SelectionEach extension can be programmed to 
ring or not ring when receiving an outside 
(CO) line call. 1.1.3.2 Outside 
(CO) Line Ringing 
Selection
Ring ToneRing Tone Pattern 
SelectionA...

1.1 Incoming Call Features
18 Feature Guide
1.1.3.2 Outside (CO) Line Ringing Selection
Description
An extension user can select whether the telephone will ring or not when receiving call(s) from assigned or 
all outside (CO) lines through personal programming. 
Conditions
 System programming determines which extension(s) will ring for incoming outside (CO) line calls in 
each time service mode (
 Flexible Ringing—Day/Night/Lunch [408-410]).
 If an outside (CO) line call reaches a users extension, but...

1.1 Incoming Call Features
Feature Guide 19
1.1.3.3 Ring Tone Pattern Selection
Description
A different ring tone pattern can be assigned to each incoming call type, such as intercom calls ( 
Extension Ring Tone Pattern [115]), calls from each doorphone ( Doorphone Ring Tone Pattern [706]), 
and calls from each outside (CO) line ( CO Line Ring Tone Pattern [423]).  
Available ring tone patterns are as follows: 
 
[Ring Tone Patterns]
Conditions
 The ring tone pattern for incoming calls (intercom calls...

1.1 Incoming Call Features
20 Feature Guide
1.1.3.4 Call Waiting
Description
A busy extension user can be alerted to a new call by Call Waiting. The busy extension user can then answer 
the second call either by disconnecting the current call or placing it on hold. 
 
If Call Waiting is enabled, a call waiting tone will be sent to the user under the following conditions:
a)When an outside (CO) line call or a doorphone call is received, or
b)When another extension executes the Busy Station Signaling (BSS)...