Panasonic Kx T1460 Operating Instructions Manual

EASA-PHONE
AUTOMATIC TELEPHONE
ANSWERING SYSTEM
KX-T1 460
MODELO KX-T1 461 

Features
Thank you for purchasing the Panasonic Telephonering System
The KX-T1 46O1KX-T1 461 features include:
I Voice-Synthesized Announcements
for time, AM/PN/, and time/day stamp on each lCM.
I Extended OGM
lets you record an outgoing message of any length on a regular audio
cassette tape (C-15 tape included).
r A$il@mffirc- operation
simply press the Playback/Pause button, and the answering system will
automatically switch to the Playback mode, rewind the ICM tape, and play
any recorded messages....

.All
uontenls
Preparation
Operation
General
Locationof controlsand jacks ........6
lnsertingthetapesandConnection. ........8
lnitial settings... .......10
Setting day and time .. . 12
Recording an OGM (Outgoing Message) ... 14
Listening to the recorded incoming messages
Erasing recorded messages
Listening to the recorded messages from a remote telephone
Recording a message from a remote telephone
Resetting the ICM tape for future messages
Recording a new OGM (Outgoing Message) 
Monitoring sounds where...

Location of controls and jacks
IncludedFor accessorv order,
accessories: call toll f ree 1-800-332-5368
ORewind Button (REW) : Used to rewind the ICM tape.
OFast Forward Button (FF) : Used to forward the ICM tape.
@VEVO Button : Used to record a personal message.
@lue ADJUST Button : Used to program the day and time
@Microphone (MlC)
G)TIME DAY CHECK Button : Announces the time and day.
onNswgn/cALLS Indicator : Indicates if there is a recorded
incoming call or a personal message
@ftUe Indicator : lt...

Inserting the tapes and Conne
Be sure to switch the power off before inserting a tape
l 
oon the cover.
Insert the OGM tape.
(Outgoing Message)
Insert the ICM taPe.
(lncoming Message)
Use Panasonic
KX-C150 KX-C300
KX C6OO(Standard Cassette)
O( iM lltpo
l()M lirpc
tapes
ction
telephone
To telephone line
Single-Line Telephone Jack
AC adaptor
(KX-A11)
Be sure to insert the tapes
before connecting the AC
aoaplor.
Power receptacle
(AC120V 60Hz)
a
o
Use only Panasonic AC Adaptor KX-A1 1.
The unit will...

Initial settings
These settings only have to be made the first time
you use the unit, and not every time.
Function of the AUTO setting (TOLL SAVER)
When you call up from an outside phone, the number of rings that it takes
for the unit to answer tells you if there are any new messages.
Answer on the 2nd ring .....At least one new message
Answer on the 4th ring. . . .. .No new messages
Hang up immediately when you hear the 3rd ring. Because the 3rd ring
means there are no new messages. Thrs will save you...

Setting day and time
1
Incoming messages can be recorded with the day and time the
messaoe was received. This is called the TIME/DAY stamo.
TIME indicator
Flashing: Day and time not set
Off: Day and time set already.
34
TIME DAY CHECK button
The FF and the REW buttons are used to program the setting.
Settings are protected for about three hours if external power is cut off.
The clock is accurate to about 45 seconds a month at room temperature
12
yet
a
a
a
1
Set the volume.
The central position is usually...

ReCOfding an OG M (ou,noins Messase)
The OGM tells the caller that vou are out, and asks to leave a message,
POWER/IN USE indicatorOGM PLAY button
Sample OGMs
When Recording Time is set to VOX (see pase 11)
Example: Hello. This is Dick Smith. lm not here now, but if youll leave
your name and phone number after the beep, lll call you back. Thank you.
Example: This is Smith Appliances. Our offices will be closed until nine
oclock in the morning. Please leave a message with your name and
telephone number...

Setting the ICM (lncoming Message) recording position
lf you want to check your OGM, press the
OGM PLAY button.
Check that the ANSWER/CALLS indicator
is lit. lf off, press the POWER ON/OFF
SWIICN,
1.2
REWbutton
ANSWER/CALLS
indicator
POWER/IN USE indicator ,
POWER ON/OFF switch
lf the POWER ON/OFF
switch is off, the unit
will not answer calls.
PLAYBACI(PAUSE button
16
Press the REW button to
rewind the tape.
The unit is now ready to answer incoming
calls.
Press the PLAYBACK/PAUSE
button to play back the...

Listening to the recorded incoming messages/
234
VOLUME
control
ICM ERASE button
POWER/lN USE indicator
ANSWE R/CALLS indicator
The number of flashes indicates the
number of messages received (maximum
of 15 flashes).
In case of power interruption, the indicator
will flash slowly after the power is restored
A$TCI[$mrc- operation
Simply press the Playback/Pause button, and the answering
system will automatically switch to the Playback mode, rewind
the ICM tape, and play any recorded messages, When your...