Panasonic Kx-T123211d Remote Programming Manual

							CPC Signal Detect Time
6e 
						

							OUTSIDE LINE FEATURE-2/s
Flexible Outward Dialing Assignment (Day/Night Mode)
n EDIT mode
Press therm7-mnmnm~mnmmIcR(1)1
/LL- Jack no. 25 through 32.
Jack no. 17 through 24
LL
I Jack no. 09 through 16
Outward Dialing Assignment (Jack no. 01 through 08)
Subcommand (CO no.01 through 12, 
>k)
* :To assign the same on all 12 CO’s
I Main Command
121 ICI :Day Mode
131 m :Night ModeNote 
0 Enter every 8 jacks.
0 Not necessary to enter a under bar “-‘I.
Parameter no.
\.
2C:Day Mode I3C:NiQht Mode! 01 through 12, *
02
IJack
no. 01

II
II
JackJackJackno. 08no. 09no. 16
0 : Disable0 : Disable
1 : Enable1 : Enable/
 0000~17000 /

!III
JackJackJackJackno. 17no. 24
no. 25
no. 320 : Disable0 : Disable
1 : Enable
1 : Enable
//default 
*I1111 - 1111I1111- 1111I1111 - 1111/1111 - 1111
W SHOW mode
1. Press the 
mmmm1IICR(I)I key.
L
llSubcommand (CO no.01 through 12, 
*)Main Command
Programming Table
0bbage 11-12 or 11-13.
121 ICI :Day Mode
131 E[ :Night ModeDisplay (In case of default)
; s > 
2COl,; = 
> 2COl / 1111~1111 / 1111~1111 / 1111~1111 / 1111~1111/
I--,
; s > !-! 
						

							VU I3llJt LINE l-IS+ I UHt-4/3
Flexible Ringing Assignment (Day/Night Mode)
I EDIT mode
Press thennnnIT]nmnmnmnnlcR(IJ1
-T
L L
L
IJack no. 25 through 32.
Jack no. 17 through 24.
Jack no. 09 through 16.
Ringing Assignment (Jack no. 01 through 08)
Subcommand (CO no.01 through 12, 
*)
* :To assign the same on all 12 CO’s
Main CommandNote 
0 Enter every 8 jacks.
[
17 El :Day Mode0 Not necessary to enter a under bar I‘-“.
14 E] :Night Mode
Parameter no.
0102
03

III
c;io00o4oo~~
II
IIIIJack
JackJackJackJackJackJackJack
no. 01no. 08no. 09
no. 16no. 17no. 24no. 25no. 320 : Disable0 : Disable
0 : Disable0 : Disable
1 : Enable1 : Enable1 : Enable
1 : Enable
4C:Day Mode ISC:Night Model 01 through 12, * /0000-0000 / 0000~0000 / 0000-0000 / q 000~0000/default 
* /1111 - 1111I1111- 1111I1111- 1111I1111 - 1111 /
I SHOW mode
Press the 
lqmmm1IICR(I)I key.Display (In case of default)
LL
LSubcommand (CO no.01 through 12, *); s > 4COlMain Command; = > 
4COl / 1111-1111 / 1111~1111 / 1111~!lll / 1111~1111 /rogramming Table
m w :Day Mode
; s > iI
See3 11-14 or 11-15.151 El :Night Mode
6
.s 
						

							OUTSIDE LINE FEATURE-G/fDelayed Ringing Assignment (Day/Night Mode)
q EDIT mode
Press the
Parameter no.
J&k
I
JackJ:ckJac;J:ckJack
I
JackJac;no. 01 no. 08no. 09 no. 16no. 17 no. 24no. 25 no. 32
0:lmmediately0:lmmediately0:lmmediately0:lmmediately1:l ringI:1 ringI:1 ring1 :l ring2:2 rings2:2 rings2:2 rings2:2 rings
3:3 rings313 rings3:3 rings3:3 rings6C:Day Mode I
7C:NightModel01 through12,*!q El00~0000//0000-0000/I7000~[700tldefault
*/0000 - 0000I0000 - 0000I0000 - 0000I0000 - 0000
clcl0clmn~nmnmnm~
-T
i L
L
l-Jack no. 25 through 32.
Jack no. 17 through 24.
Jack no. 09 through 16.
Delayed Ringing Assignment (Jack no. 01 through 08)
Subcommand (CO no.01 through 
12,*)
* :To assign the same on all 12 CO’s
Main Command
Note 
0 Enter every 8 jacks.
161 E[ :Day Mode0 Not necessary to enter a under bar “-‘I.
mm :Night Mode
W SHOW mode
Press the171 m m 111 IcR(1)Ikey.
Subcommand (CO no.01 through 12, 
*)Main Command
Programming Table
s ..age 11-1’6 or 11-I 7.
/
161 b[ :Day Mode
m ICI :Night ModeDisplay (In case of default)
; S > 
6COl,; = 
>6COl / 0000~0000 / 0000~0000 / 0000~0000 / 0000~0000 /
l---l;s 
> !-!-6 
						

							EXTENSION FEATURE-ll Extension Group Assignmentl Call Transfer to Outside Line
o Service Class Assignment of Toll Restrictionl Call Forwarding to Outside Line
e Exterkion Namee Executive Override
l Account Code Input Mode
l Do not Disturb Override
W EDIT modeSee the table on page 7-2.
II
Press the l~~nnnnnnnnInInnnrn[1nnnIIn key.
I-
L- Main Command
L-
LLDo not Disturb Override
Executive Override
Call Forwarding to Outside Line
Call Transfer to Outside Line
Account Code Input Mode
Extension Name
Service Class Assignment of Toll Restriction (Night Mode)
Service Class Assignment of Toll Restriction (Day Mode)
Extension Group Assignment
Su bcommand
01Jack no. 01
32 : Jack no. 32
*: To assign the same on all 32 jack numbers
l-l 
						

							n EDIT mode (cont.)
Parameter no.01
Extension
Group
Assignment
1:Group 1
8:Group 88:Class8
&Class8
02I03
Service Class Assignment
of Toll Restriction
Day ModeNight Mode
1 Class11 Class1
04
Extension
Name“A” through 
‘7”“a” through “z”“0” through “9”
! 
$%&‘()
‘f-,;:
?@=”
l Up to 10 digits05
Account
Code Input
Mode
0:Option
1 :Forced
06
Call Transfer
to Outside
Line
0:Disable
1 
:Enable
07
Call
Forwarding
to Outside
Line
0:Disable
1 
:Enable
08I09
Executive
OverrideDo not
Disturb
Override
0:Disable
1 :Enable0:Disable
1 
:Enable
1Ei 01 through 32,*/ 0 / q / 0default
* Ill l/i INothing lstored0 I0 IO I0 IO I
E SHOW mode
Press the17 mm 111 IcR(1)Ikey.
Display (In case of default)
Subcommand(Jack no.01 through 32, 
>k);E > 1EOlMain Command
;=> 1E01/1/1/1//0/0/0/0/0/
Progr’amming Table; E > 
[:ISee pages 11-18 or 11-19.
7-, 
						

							EXTENSION FEATURE-2
Flexible CO Button
To Change into Other CO ButtonTo Change into Message Waiting Button
To Change into DSS ButtonTo Change into Other All CO Button
To Change into One Touch Dialing ButtonTo Assign into Trunk Group Access Button
n EDIT mode
- PITS key 08
- PITS key 07
- PITS key 06
One Touch Dial can’t be entered.
PITS key 05
Note 
0 When the Button which has been set
- PITS key 04
PITS key 03
- PITS key 02to One Touch Button and also One
Touch Dial has been entered is set to
One Touch Button again, the One
Touch Dial is cleared, so be careful
when you load the data “2E” saved
with Dump Mode.
PITS key 01
- Subcommand (Jack no.01 through 32, *)
* : To assign the same on all 32 jack numbers
- Main Command
, 
-3., 
						

							cParameter no.
AParameter
0102 03 040506 070809101112PITS key PITS key PITS key PITS key PITS key
PITS key PITS key
PITS key0102 03 04PITS keyPITS keyPITSPITS05keykey06 0708
09
IO1112
9og 0 , 01
INote 0“ q “must be entered togetherwhen CO Button or DSS Button or
0 : CO ButtonCO no.01 through 12 (2 digits)
Trunk Group Button are entered.
1 : DSS ButtonJackno.01 through 32 (2digits)2 : One Touch Dialing Button
3 : Message Waiting Button
*: Other All CO Button
#: Trunk Group Access Button-Trunk Group no.1 through 8 (1 digit)
i
2Ei 01 through 32, */
Idefault
*I 0,Ol/ 0,02 / 0,03 / 0,04 / 0,05 / 0,06 / 0,07 / 0,08 / 0,09 / 0,lO / 0,ll / 0,12 /
H SHOW mode
Pressthe mmIO(mm key.Display (In case of default)
Subcommand
(Jack no.01; S > 2EOlthrough 32, 
% ); = >2EOl / 0,Ol / 0,02 / 0,03 / 0,04 / 0,05 / 0,06 / 0,07 / 0,08 / 0,09 / 0,lO / 0,ll / 0,12 /Main Command
; s > 
!:IProgramming Table
See pages 11-20 or 
11-22.
.7-7 
						

							CO Button, DSS Button, One Touch Button, M.W (Message Waiting) Button, Other All CO Button and Trunk Group Button can be set, but Assignmentexcept the key which enable to assign to the button of the unit are ignored.
Example :When KX-T123230 is connected to Jack 02 and all PITS Buttons are set to CO Button at first and then it is changed to KX-T30830, the DSSButton is invalidated because CO Button is assigned to DSS button.
All the unit and the format are as follows.
2E xx 
/ [7 / 0 / [7 / CR( 1)
AA
co1co 1
IUnable Parameter (04 through
co2co 212) to assign to KX-T30820 and
30850.KX-T30850
KX-T30820
2E m,q . . . . . . . . . . . . . . . . . . . . . . . . . . ./ c] /CR( 1 )
(CO 1)ttIIIH3(oarameter 
no.01)
(parameter no. 12)KX-T123220
KX-T123230
KX-Tl23235CO Button
DSS ButtonI1II
I2Exx /u/u /[I
(DSS 11)
il%(DSS 18)
co1
co2
co3
ICMInvalid
Enable to enter, but unable to
assign to KX-T30830.
---I
DSS 11DSS 18KX-T30830
Unable parameter (07 through 12) to
assign to KX-T616 Type.
KX-T61620, KX-T61630
KX-T61650 
						

							DOORPHONE FEATURE - l/2
Ringing Assignment of Doorphone (Day / Night Mode)
I EDIT mode
Press the 
I~nflnn~n~D~~~~ key.
1 L Jack25through32no.L 09 through Jack no. 16 L 17 through Jack no. 24Ringing Assignment of Doorphone (Jack no. 01 through 08)
Subcommand
1 : Doorphone 1
2 : Doorphone 2
z-#: Doorphone 1 and 2Note e Enter every 8 jacks
0 Not necessary to enter a under bar “-I’.
- Main Command
rl rl :Day Mode
12( F\ :Night Mode
Parameter no.
Commandcommands.^ ^ _.
01
IIJack
no. 01
IJack
no. 08
0 : Disable
1 : Enable02
03

I
gooo-000&lII
II
II
I
Jack
JackJackJack
no.09
no.16no.17no.2404
rJooo-000~B II
I1
II
JackJack
no.25no.32
0
:Disable0:Disable
0:Disable
1:Enable1:Enable1:Enable
lI-‘:UayMDde I
!P : NightMode11,2,*/qono~oooo/qoocl,nooo/q/qdefault
*I1111 - 1111/1111 - 1111/1111 1111-/1111 - 1111 /-:
:8