Panasonic Kx Prw130 Operating Instructions Manual

Editing an outside monitoring number
1
P
ress MMenu N on the handset being
monitored.
2 Mb N:  “On/Off ” a  M Select N
3 Mb N:  “On ” a  M Select N
4 Mb N: Select the outside line.  a M Edit N
5 MMenu N a  M b N:  “Edit ” a  M Select N
6 Edit the name if necessary.  a M OK N
7 Edit the phone number if necessary.  a
M OK N a  M Select N Erasing an outside monitoring
n

umber
1 Press  MMenu N on the handset being
monitored.
2 Mb N:  “On/Off ” a  M Select N
3 Mb N:  “On ” a  M Select N
4 Mb N: Select the...

memo can also be displayed for the schedule
a
larm.
Important:
R Make sure the unit’s date and time setting
is correct (page 12). Adding a new entry
1
MM

enuN (right soft key)  a   
a
M S

elect N
2 Mb N: Select the desired date.  a M Select N
3 MMenu N a  M b N:  “Add new entry ” a
M Select N
4 Edit the date if necessary.  a M OK N
5 Set the desired time.  a M OK N
6 Enter a text memo (30 characters max.;
page 17).  a M OK N
7 Mb N: Select the desired alarm tone.  a
M Select N 2 times
R You can select...

Important:
R
T
he additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available. Registering a handset to the
b
 ase unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,  is displayed even when the handset is
n

ear the base unit), re-register the handset.
1 Handset:
MMenu N (right soft key)  #130
2 Base unit:
Press and hold...

Using Caller ID service
I mportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details. Caller ID features
W

hen an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–“Out of area ”:...

2
Press  MC N to search from the most recent
call, or press  MD N to search from the
oldest call.
R You can see the detailed information
about the caller by pressing  MDetail N
when in multiple display mode.
3 To call back, press  M N
.
T

o exit, press  MOFF N.
Note:
R If the entry has already been viewed or
answered, “ ” is displayed.
Editing a caller’s phone number
Y
 ou can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
1 MC N CID
2 Mb N: Select...

Answering system
T he answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting  “Greeting only ” as the recording
time setting (page 42).
Important:
R Make sure the unit’s date and time setting
is correct (page 12). Memory capacity (including your
g

reeting message)
The total recording capacity is about 38
minutes. A maximum of 64 messages can be
recorded.
Note:
R...

Resetting to a pre-recorded greeting
m
essage
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1 MMenu N (right soft key)  #304
2 MYes N a  M OFF N Playing back the greeting
m

essage
1 MMenu N (right soft key)  #303
2 To exit, press  MOFF N. Listening to messages
Using the base unit
W

hen new messages have been recorded,
M N
 
on the base unit flashes.
Press  M N
 (PLAY).
R During playback,  M N
 on the base unit...

2
Mb N: Select the desired item from the
message list.  a M Play N
R You can erase the selected message
as follows:
MMenu N a  M b N:  “Erase ” a  M Select N
a  M b N:  “Yes ” a  M Select N
3 When finished, press  MOFF N
Note:
R If the item has already been heard, “ ” is
d

isplayed, even if it was heard using
another handset.
R “Message ” is displayed in the message list
if the unit cannot receive caller information. Operating the answering system
M
M

enu N (right soft key)  a   
a  M S
elect NKey...

Advanced new message
a lerting features Audible message alert
T

his feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the  “Base unit beep ”
setting is turned on. The default setting is
“ Off ”.
1 MMenu N (right soft key)  #339
2 Mb N: Select the desired setting.  a
M Save N a  M OFF N New message alert by a call
T

his feature allows you to receive a
notification by...

call. This is so that unauthorized parties
c
annot listen to your messages. The default
setting is  “Inactivate ”.
– “Inactivate ”: You can listen to the
message by pressing  4 to play new
messages (without entering the remote
access code).
– “Activate ”: You must enter your remote
access code and then press  4 to play new
message.
1 MMenu N (right soft key)  #338
2 Mb N:  “Remote code ” a  M Select N
3 Mb N: Select the desired setting.  a
M Save N a  M OFF N Listening to messages
A

fter you answer the...