Panasonic Kx Prw120 Operating Instructions Manual

7Edit the phone number if necessary.  a
M OK N a  M Select N
Erasing an outside monitoring
number
1Press  MMenu N on the handset being
monitored.
2 Mb N:  “On/Off ” a  M Select N
3 Mb N:  “On ” a  M Select N
4 Mb N: Select the outside line.  a M Edit N
5 MMenu N a  M b N:  “Erase ” a  M Select N
6 Mb N:  “Yes ” a  M Select N a  M OFF N
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby...

3MMenu N a  M b N:  “Add new entry ” a
M Select N
4 Edit the date if necessary.  a M OK N
5 Set the desired time.  a M OK N
6 Enter a text memo (30 characters max.;
page 17).  a M OK N
7 Mb N: Select the desired alarm tone.  a
M Select N 2 times
R You can select  “Off ” if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MOFF N
Note:
R To stop the alarm, press  MStop N or place
the handset on the base unit or charger.
R When...

2Base unit:
Press and hold  MN for about 5 seconds.
R If all registered handsets start ringing,
press  M
N again to stop, then repeat
this step.
3 Handset:
Press  MOK N, then wait until a long beep
sounds.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1 MMenu N (right soft key)  #131
R All handsets registered to the base unit
are displayed.
2...

Using Caller ID serviceImportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
RIf the unit cannot receive caller information,
the following is displayed:
–“Out of area ”: The...

2Press  MC N to search from the most recent
call, or press  MD N to search from the
oldest call.
R You can see the detailed information
about the caller by pressing  MDetail N
when in multiple display mode.
3 To call back, press  M
N.
To exit, press  MOFF N.
Note:
R If the entry has already been viewed or
answered, “
” is displayed.
Editing a caller’s phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
1 MC N CID
2 Mb N: Select the...

Answering systemThe answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting  “Greeting only ” as the recording
time setting (page 41).
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
Memory capacity (including your
greeting message)
The total recording capacity is about 38
minutes. A maximum of 64 messages can be
recorded.
Note:...

Playing back the greeting
message
1MMenu N (right soft key)  #303
2 To exit, press  MOFF N.
Listening to messages
When new messages have been recorded,
“ New message ” is displayed on the handset.
1 To listen to new messages:
MPlay N*1
or
M Menu N (right soft key)  #323
To listen to all messages:
M Menu N (right soft key)  #324
2 When finished, press  MOFF N
*1 If there are no new messages in the answering system,  MPlay N is not
displayed.
Note:
R To switch to the receiver, press  M
N.
Listening to...

RDuring rewinding, the handset makes a
continuous beeping sound. Rewinding
speed may vary depending on the recorded
message.
R At the beginning of the message, the unit
plays the message at normal speed.
Fast-forwarding the message
Press and hold  ME N until the unit plays the
desired part of the message.
R During fast-forwarding, the handset makes
a continuous beeping sound.
Fast-forwarding speed may vary depending
on the recorded message.
R Even if you press and hold  ME N when the
end of this message...

4Enter the desired name (16 characters
max.).  a M OK N
5 Enter the desired number (24 digits
max.).  a  M OK N a  M Select N a  M OFF N
Turning on/off the new message alert
setting
1 MMenu N (right soft key)  #338
2 Mb N:  “On/Off ” a  M Select N
3 Mb N: Select the desired setting.  a
M Save N a  M OFF N
Editing the set phone number
1 MMenu N (right soft key)  #338
2 Mb N:  “Notification to ” a  M Select N
3 MMenu N a  M b N:  “Edit ” a  M Select N
4 Edit the name if necessary (16 characters
max.).  a...

Important:
RTo prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1 MMenu N (right soft key)  #306
2 Enter the desired 3-digit remote access
code.
3 MSave N a  M OFF N
Deactivating remote operation
Press  * in step 2 on “Remote access code”,
page 39.
R The entered remote access code is deleted.
Using the answering system
remotely
1 Dial your phone number from a
touch-tone phone.
2 After the greeting message starts, enter
your remote access code.
3 Follow...