Panasonic Kx P7305 Operating Instructions Manual

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics86
1Open the file you want to print from within the application.
2Select Print... from the application’s File menu.
3Select the KX-P7305 or KX-P7310 printer from the Printer menu.
4Click General menu and select the desired menu.
General menu (see page 87)
Layout menu (see page 89)
Printer Specific Options menu (see page 91)
For other menus, refer to the balloon help.
Displaying the Print Window 

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics87
1Copies
Determines the number of copies of the document will be printed.
2Collated
Clicking on this check box prints the copies of the entire document a number of times, 
from 1st page to the last page. If you print 3 copies of a 5 pages document, printer prints 
page 1 through page 5 three times.
Removing the check prints the copies of the 1st page, then the copies of the next page 
and so on.
3Pages
Specifies the...

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics88
4Paper Source
•All pages from
Enables to select the tray feeding media. If the optional 2nd feeder is installed in your 
printer and defined it in the Installable Options menu (see “Setting the Installable Options” 
on page 93), Option Cassette can be available.
• Auto Select
Auto Select is the invalid selection.
•Auto
The printer picks media from the tray loaded with the media. The printer automatically 
feed media...

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics89
1Pages per sheet
Specifies number of pages of your document to print on one piece of paper.
2Layout direction
Specifies the layout of the pages per sheet.
3Border
Sets the type of line to appear around the page.
Setting the Layout Menu
1
2
3
4 

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics90
4Print on Both Sides
Enables to print on both sides of paper by clicking on the check box and selecting the 
binding style. To perform the duplex printing, the following media and paper source must 
be set. To perform duplex printing, see “Performing Duplex Printing” on page 96.
Paper size: Letter, Legal, A4, B5 or Executive in the Page Setup window
(see page 84)
Media Type: Plain Paper in the Printer Specific...

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics91
1Resolution
Selects a quality setting. 300x300 dpi, 600x600 dpi or 1200x600 dpi can be selected. A 
higher resolution provides better print quality. However, the throughput speed is 
diminished. 
2Toner Save Mode
Enables to reduce the amount of toner used to print. 
Off: The toner save feature is turned off. This is the default setting and is recommended 
for the high print quality.
On: The toner save feature is...

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics92
3Media Type
Selects the type of media.
*1Cotton Paper cannot be used for duplex printing.
4Fit to Page
Document is printed in the size fitted to the media size.
Paper SourceMedia Type
Media Tray
Plain Paper, Cotton Paper*1, Transparency, Envelope
Manual Feed Plain Paper, Transparency, Thick Paper, Cotton Paper, 
Label, Envelope
Option Cassette Plain Paper 

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics93
The printer driver installed on the computer cannot automatically detect that an option has 
been installed in the printer. After installing an option in the printer, you must define whether 
an option is installed or not with Chooser or printer icon for USB.
 Setting the options with Chooser
1Select Chooser from the Apple menu and ensure AppleTalk is Active.
2Click the LaserWriter 8 printer icon.
3Select the name of...

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics94
6Click the option installed in your printer and select Installed or total 
installed memory.
7Click [OK].
8Click [OK]. 

Setting the Printer Driver (Mac OS 8.5 - Mac OS 9.2)
Macintosh Macintosh WindowsBasics95
 Setting the options with printer icon for USB
1Click the printer icon for USB on the desk top screen.
2Click the Printing menu and select Change Setup....
• If Change Setup... menu does not appear, see the note below.
3Select the installed option from Change.
4Select Installed or installed memory from To.
5Click [OK].
NOTE
• If Change Setup... menu does not appear in the Printing menu, follow the instructions...