Panasonic Kx P7305 Operating Instructions Manual

Setting the Printer Driver
MacintoshBasics
Windows Windows66
7Enter a new file name or the same file name (Max. 8 characters) as used 
at step 1 in the file name box.
The file is saved in the following directory. 
Windows 95 / Windows 98 / Windows Me: Windows (OS System)\System\Kme
Windows NT 4.0 / Windows 2000 / Windows XP / Windows Server 2003:
Winnt (OS System)\system32\Kme
8Click [OK].
9Print the overlay file to the printer.
The confirmation window to make an overlay file is displayed.
10Click...

Setting the Printer Driver
MacintoshBasics
Windows Windows67
16Click on the check box of your desired selection.
Print With Overlay: The overlay file is overlapped only on the first page (Overlay 1st 
Page) or all pages (Overlay All Pages) of a document.
Print Cover Page:  The overlay file is printed as the cover page before the 
document.
Print Trailer Page:  The overlay file is printed as the trailer page after the document.
NOTE
• If the Make Overlay/Cover/Trailer Page File check box is checked,...

Status Display
MacintoshBasics
Windows Windows68
The Status Display will show the following informations. When using the KX-P7310 and the 
printer is directly connected to the network with the network interface, the Status Display 
shows the network setting information.
• Error messages
• Recovery information
• Printer general information
• Network setting information (KX-P7310 only)
When an error has occurred, the Status Display icon ( ) is blinking on the task bar or a 
Printer Status Display window is...

Status Display
MacintoshBasics
Windows Windows69
1Turn the printer on.
2Click [Start], move the pointer to Programs or All Programs, Panasonic 
and Panasonic KX-P7305 and KX-P7310, then click Status Display.
When staring the Status Display program for the first time, the Search Device window
is displayed. Proceed to the following steps. For the detailed information of the window,
see “Selecting the Printer to Get the Status” on page 78.
3Click [Search].
The search Result is displayed.
4Click the printer...

Status Display
MacintoshBasics
Windows Windows70
1This box shows the printer status.
2This box shows the printer is connected to local or network. If the printer is 
connected to the network, the printer’s IP address or server name will be displayed.
3The loaded media, printer’s information, error recovery and network information 
(KX-P7310 only) are displayed by clicking on the More Information check box (see 
“More Information Window” on page 71).
4The status display is closed by clicking [Close]....

Status Display
MacintoshBasics
Windows Windows71
To display the More Information window, click on the More Information check box in the 
Status Display window.
More Information window consists of two tabs: Information and Recovery Information.
■Information tab
Shows the media information that set with the 
Remote Control Panel (see “Remote Control 
Panel” on page 28).
Opens the window to display the following 
information by clicking [Detail...]
.
•Printer Information(see page 72)
•Network...

Status Display
MacintoshBasics
Windows Windows72
■Printer Information Tab
Shows the firmware version and the information of the installed options.
Serial NumberDisplays the printer’s serial number.
Controller FW Version  Displays firmware version of the printer’s controller board.
Engine ROM Version Displays version of the engine ROM.
Memory Size  Displays memory size installed in the printer.
To t a l  P a g e  Displays the total number of printed pages.
DensityDisplays the density setting.
Power Save...

Status Display
MacintoshBasics
Windows Windows73
■ Network tab (KX-P7310 only)
Shows the network information of the printer: IP address, MAC address, etc. Option menus 
appear by clicking the + button of the Network Information in the left pane. The information 
appears in the right pane by clicking the option menu.
General
MAC Address Mac address of the network card.
TCP/IP
Protocol TCP/IP protocol is enabled or disabled.
IP Address IP address of the network card.
Subnet Mask Subnet mask for the TCP/IP...

Status Display
MacintoshBasics
Windows Windows74
AppleTalk
Protocol AppleTalk protocol is enabled or disabled.
Printer Name Printer name (KX-P7310-######) on the AppleTalk. 
###### indicates the last 3 byte of MAC address 
of the printer.
Zone Name Zone name of the AppleTalk.
SMB Information
Protocol NetBEUI protocol is enabled or disabled.
Computer Name*
1Printer name displayed in Windows.
WorkGroup Name*
1Workgroup name displayed in Windows. 
*1To display the computer name and workgroup name, “Client...

Status Display
MacintoshBasics
Windows Windows75
■Recovery Information tab
1Shows corrective action for the printer error with animation.
2Shows corrective instructions or status.
3Clicking this button starts the animation. When the animation is started, the start 
button is changed to   button. Clicking   button will stops the animation.
4Clicking the   button steps backwards.
5Clicking the   button exits the animation.
6Clicking the   button steps forward.
1
2
3
4
56