Panasonic KX MB1520 User Manual

Feature/CodeSelectionSending a fax at a specific
time
M B NM4NM 1NM 2NThis feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
M 0 N “ OFF ” (default)
M 1 N “ ON ”
To send a document:
1. If the  MFax N light is OFF, turn it ON by pressing  MFax N repeatedly.
2. Set the original (page 18).
3. If necessary, change the contrast (page 34) and the resolution (page 34).
4. MMenu N A  M B NM4NM...

Feature/CodeSelectionSetting dial keypad entry
restriction
M B NM4NM 2NM 1NM0 N “ OFF ” (default): Deactivates this feature.
M 1 N “ ON ”: If you do not wish to dial a fax number manually using the dial keypad,
activate this feature.
Note:
R If you select  “ON ”, you cannot make redial calls to fax numbers entered
using the dial keypad.
R If you select  “ON ”, the fax number re-entry setting (feature #422 on
page 52) will be deactivated.Setting the fax number
re-entry before sending  
M B NM4NM 2NM 2NM0...

Feature/CodeSelectionSetting friendly reception
M B NM4NM 3NM 8NTo receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M 0 N “ OFF ”: You have to press  MStart N, and then  M2 N for fax reception.
M 1 N “ ON ” (default): You do not have to press  MStart N, and then  M2 N for fax
reception.Receiving a fax into the
computer
M B NM4NM 4NM 2NIf you wish to receive a fax into a computer, activate this feature and run  [PC
FAX]  from Multi-Function Station.
M 0 N “ OFF ”...

9.4 Copy featuresFeature/CodeSelectionSetting the input tray to use
for copy
M B NM4NM 6NM 0NM1 N “ #1 ” (default): The paper input tray is selected. The displayed paper size
depends on the recording paper size setting (feature #380 on page 48).
M 2 N “ #2 ”: The manual input tray is selected. The displayed paper size depends
on the recording paper size setting (feature #381 on page 48).Changing the default copy
resolution
M B NM4NM 6NM 1NTo change the default resolution setting for copying.
M 1 N “...

9.5 PC print featuresFeature/CodeSelectionChanging the data timeout
setting
M B NM7NM 7NM 4NThe unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. MMenu N A  M B NM7NM 7NM 4N A  M Set N
2. Enter the desired data timeout setting from  “005 ” seconds to  “600 ”
seconds, using the dial keypad.
R The default setting is  “060 ” seconds.
3. MSet N A  M Menu NSetting mutual A4/letter print
M B NM7NM 7NM 6NThis feature allows...

9.6 Scan featuresFeature/CodeSelectionSetting the scan mode for
Push Scan
M B NM4NM 9NM 3NM1 N “ VIEWER ” (default): The scanned image will be displayed in the
[Multi-Function Viewer]  window.
M 2 N “ FILE ”: The scanned image will be saved as a file.
M 3 N “ EMAIL ”: The scanned image will be saved for email attachment.
M 4 N “ OCR ”: The scanned image will be displayed in the OCR window.
Note:
R The OCR software is not supplied. To use OCR software, you need to
specify the path of the OCR software...

10.1 Character entry (KX-MB1520
only)
The dial keypad is used to enter characters and
numbers.
– Press  MF N or  ME N to move the cursor.
– Press the dial keys to enter characters and numbers.
– Press  MStop N to erase the character or number
highlighted by the cursor. Press and hold  MStop N to
erase all characters or numbers.
– To enter another character located on the same dial key, press  ME N to move the cursor to the next space,
then press the appropriate dial key.KeypadCharactersM 1...

10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1 Start Multi-Function Station.
2 [Utilities]  A  [Device Monitor]
R The  [Device Monitor]  window will appear.
3 Confirm the status of the unit.
[Status]:  Current status of the unit
Note:
R Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[Status]  tab by clicking  [Advanced Information] .
R You can update the status of the unit by...

11.1 Report messages (KX-MB1520 only)
To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the
confirmation and journal reports (page 34).MessageCodeCause & SolutionCOMMUNICATION ERROR40-42
46-72 FFR A transmission or reception error occurred. Try
again or check with the other party.43
44R A line problem occurred. Connect the telephone line
cord to a different jack and try again.
R An overseas transmission error occurred. Try using
the overseas mode...

11.2 Display messages
To indicate the unit’s status, one or more of the following messages will appear on the display.DisplayCause & Solution“ CALL SERVICE ”RThere is something wrong with the unit. Contact our service personnel.“CHANGE CARTRIDGE ”RThe toner cartridge is not inserted properly. Re -insert it correctly ( page 10).
R There is something wrong with the toner cartridge. Replace the toner
cartridge.“ CHECK CARTRIDGE ”RThe toner cartridge is not inserted properly. Re -insert it correctly ( page...