Panasonic KX MB1520 User Manual

2.8.2 Installing Multi-Function Station on a
computer
R Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with the USB
cable. If the unit is connected to a computer with
the USB cable before installing Multi-Function
Station, the  [Found New Hardware Wizard ] dialog
box will appear. Click [Cancel] to close it.
R The screenshots shown in these instructions are
for Windows XP and are included for reference
only.
R The screenshots shown in these instructions
may differ...

2. [Modify] A  [Add Multi-Function Station Driver] .
Then follow the on-screen instructions.
Note:
R You cannot connect more than one unit to the same
computer at the same time.
To modify the software (To add or uninstall each
component)
You can select the components to install or uninstall
anytime after the installation.
You must be logged in as an administrator in order to
modify Multi-Function Station.
1. Start Windows and insert the supplied CD -ROM into
your CD-ROM drive.
2. [Modify]  A  [Modify...

[]
R To display usage tips.
[
]
R To display information about Multi-Function Station.
Note:
R You can confirm if the unit is connected to your
computer by using Device Monitor (page 58).
R Computer features (printing, scanning, etc.) may not
function properly in the following situations:
– When the unit is connected to a computer that was custom-built by the user.
– When the unit is connected to the computer via a
PCI card or other expansion card.
– When the unit is connected to another piece of...

3.1 Printing from Windows
applications
You can print a file created in a Windows application. For
example, to print from WordPad, proceed as follows:
1 Open the document you want to print.
2 Select  [Print...]  from the  [File] menu.
R The  [Print]  dialog box will appear.
For details about the  [Print] dialog box, click  [?],
then click the desired item.
* The pictured model is KX-MB1520.
Note:
R For Microsoft PowerPoint ®
, select  [Color] or
remove the check next to  [Grayscale] in the print
dialog so...

– Labels that are wrinkled, damaged or separatedfrom the backing sheet.
– Any sheet of labels that has spaces in it where some of the labels have been removed.
– Labels that do not completely cover the backing sheet as follows:
3.2 Easy Print Utility
By printing using the Panasonic Easy Print Utility instead
of the printer driver, you can use useful printing features
for your convenience.
– Preventing unnecessary prints by checking the preview on PC screen
– Combining multiple documents
– Saving a file...

4.1 Scanning from the unit (Push
Scan)
You can easily scan the document by using the operation
panel on the unit. You can select one of the following
scanning modes depending on how you intend to use the
scanned image.
Scanning mode
“ VIEWER ”Viewing using Multi-Function
Viewer (Scan to Multi -Function
Viewer)“ FILE ”Saving as a file to your
computer (Scan to save as a
file)“ EMAIL ”Sending as an attached file to
an email destination from your
computer (Scan to email)“ OCR ”Using OCR software (Scan to...

4.2 Scanning from a computer
(Pull Scan)
4.2.1 Using Multi-Function scan application
By clicking an application icon, the selected application
starts automatically after scanning.
1 Set the original (page 18).
2 Start Multi-Function Station.  A [Scan]
3 Click the desired application icon.
R When you click  [Custom], the pre-programmed
application starts.
R To cancel scanning while the documents are
being scanned, click  [Cancel].
Note:
R You can change the scanning settings beforehand for
each...

5.1 Making a copy
* The pictured model is KX-MB1520.
1 If the  MCopy N light is OFF, turn it ON by pressing
M Copy N repeatedly.
2 Set the original (page 18).
3 If necessary, change the copy size (original
document size and recording paper size), resolution
and contrast according to the type of document.
R To select the copy size, see page 28.
R To select the contrast, see page 28.
R To select the resolution, see page 28.
4 If necessary, enter the number of copies (up to 99).
5 MStart N
R The unit will...

5.2 More copying features
R Make sure that the  MCopy N light is ON.
5.2.1 Zoom copy (enlargement / reduction)
1 Set the original (page 18).
2 Press  MZoom N repeatedly to select the zoom rate that
fits the size of your document and recording paper.
– “ZOOM  =100% ”*1
– “50% ”
– “200% ”
*1 Press  MC N or  MD N repeatedly to change the zoom
rate by 1 % at a time from  “25% ” to  “400% ”.
You can also enter the desired percentage
specifically by using the dial keys.
3 MSet N
4 If necessary, enter the...

Note:
R The unit will store the documents into memory while
collating the copies. If the memory becomes full while
storing, the unit will only print out the stored pages.
R You can hold the previous collate setting (feature
#469 on page 54).
5.2.3 Quick ID copy feature / Image repeat
feature
Quick ID copy feature:  To copy 2-sided documents
onto one page.
Image repeat feature:  To copy a single document
repeatedly onto one page.
Note:
R The copied documents will not be reduced to fit the
recording paper,...