Panasonic KX MB1520 User Manual

5Hold the toner cartridge ( A) by the center handle,
then insert firmly to lock into place.
6 Close the front cover.
When to replace the toner cartridge
When the display shows the following, replace the toner
cartridge.
– “TONER LOW ”
– “TONER EMPTY ”
– “DRUM LIFE LOW REPLACE SOON ”
– “DRUM LIFE OVER CHANGE CARTRIDGE ”
Toner cartridge life:
R See page 74 for information on the toner cartridge
life.
R To check the life and quality of the drum inside the
toner cartridge, print the printer test list (page...

1.6 Connections
Caution:
R When you operate this product, the power outlet
should be near the product and easily accessible.
* The pictured model is KX-MB1520.
Power cord
R Connect to a power outlet (120 V, 60 Hz).
Telephone line cord *1
R Connect to a single telephone line jack (RJ11C).
[EXT]  jack*1
R You can connect an answering machine or an
extension telephone. Remove the stopper if
attached, and take care of it appropriately.
Answering machine (not supplied) *1
*1 KX-MB1520 only
IMPORTANT NOTICE...

1.7 Turning the power ON
Turn the power switch to the ON position ( A).1.8 Recording paper
Note for recording paper:
R We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
R Do not use the following types of paper:
– Paper with cotton and/or fiber content that is over
20 %, such as letterhead paper or paper used for
resumes
– Extremely smooth or shiny paper, or paper that is
highly textured
– Coated, damaged or wrinkled paper
–...

RThe unit is set for printing letter-size plain paper
by default.
– To use other paper sizes, change the
recording paper size setting (feature #380 on
page 48).
– To use thin paper, change the recording paper
type setting (feature #383 on page 49).
1 Lift the paper input tray ( A), and pull it completely
out.
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
3 Load the paper, print-side down ( A).
Important:
R Push down to lock the plate ( B) in the paper
input tray, if necessary.
4...

5Insert the paper input tray into the unit.
Note:
R If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
R If the paper input tray does not close, the plate in the
paper input tray may not be in the locked position.
Push the paper down and make sure that the paper
is laying flat in the paper input tray.
To expand the paper exit
You can temporarily expand the paper exit before
printing.
– When printing on small sized paper, you can pull it out easily.
– When printing...

1.8.2 Manual input tray
You can use the manual input tray for printing with the
computer and for copying. It can hold one page at a time.
When printing or copying multiple pages, add the next
page after the first page has been fed into the unit.
R Please refer to page 73 for information on recording
paper.
R When printing with the computer, custom size
recording paper can also be used.
R The unit is set for printing letter-size plain paper
by default.
– To use other paper sizes, change the
recording...

2.1 Dialing mode (KX-MB1520
only)
If you cannot dial (page 34), change this setting
according to your telephone line service.
1 MMenu N
2 Press  MB NM1NM 2NM 0N to display  “DIALING MODE ”.
3 Press  M1 N or  M2 N to select the desired setting.
M 1 N “ PULSE ”: For rotary/pulse dial service.
M 2 N “ TONE ” (default): For tone dial service.
4 MSet N
5 Press  MMenu N to exit.
2.2 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB1520
only)
You can select the desired mode by pressing the
following button...

2.3 Setting the original
1Open the document cover ( A).
2 Place the document FACE DOWN on the scanner
glass ( B), aligning the top left of the document with
the corner where the 
 mark is positioned.
3 Close the document cover.
Note:
R Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
R If the original is a book thicker than 15 mm ( 19
/32 "),
do not close the document cover.
R Confirm that any ink, paste or correction fluid has
dried completely.
R...

2.5 Date and time (KX-MB1520
only)
We recommend you to set the date and time. The other
party will receive your unit ’s date and time as the header
information.
1 MMenu N A  M B NM1NM 0NM 1N A  M Set N
2 Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2011
M 0 NM 8N M 0 NM 3N M 1 NM 1N
3 Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. M1 NM 0N M 1 NM 5N
2. Press  MG N repeatedly to select  “PM ”.
4 MSet N
5...

2.7 Your fax number (KX-MB1520
only)
You can program your fax number so that it appears on
the top of each page sent.
1 MMenu N A  M B NM1NM 0NM 3N A  M Set N
2 Enter your fax number, up to 20 digits.
R To enter a “+”, press  MG N.
R To enter a space, press  MB N.
R To enter a hyphen, press  MFlash N.
R To erase a number, press  MStop N.
3 MSet N
4 Press  MMenu N to exit.
To correct a mistake
Press  MF N or  ME N to move the cursor to the incorrect
number, and make the correction.
R To erase all numbers,...