Panasonic Kx-a271 Eia/Remote Programming And Diagnosis Manual

2-8 Operating Flow Chart 
i ,: 
[ I Batch Editing Mode 
._ 
., 2. 
I_ 
: 
Set FD or ND 
Save the system data Load the system data 
(See “Chapter 7 DSHS 
c]::tyl;::;:::) Edltmg the data In (See Chapter 4 System 
I I 
I 
0 
Saving the file 
-~ 
I I 
, 1 
Connecting with Connect PC with DSHS 
(See “Chapter 7 DSHS 
* Setting the file Set FD otHD 
DSHS 
Connect / Disconnect) 
1 I -~ 1 I 
I I 
Loading the data of * Load the system data . Save the system data 
PC DB into DSHS of PC DB into DSHS DB Saving the...

2 Interactive Editing Mock 
I I 
/ Interaz%iiting 1 
1 
I 1 . 
I 
Starting the system 
(The initial screen 
I 
Edit the data of DSHS DB 
“Chapter 4 System 
Disconnect PC from DSHS 
(SW Chapter YDSHS 
2-13  

2-9 enu Tree 
mote> Main Menu 
m Menu 
{Line} Edit 
-/ Station 
----r--v-. 
. 1 DSS 
I 
rSy Day/Night  stem 
------- 
Class of Service 
---*A------ 
Soeed Dial 
------- 
1 ARS 
I ARS Mode/Time/Modify Data 
-mm---- 
ARS Routin@an 
---- ----- 
ARS Leading Digit 
[ Aux. Ports 
I Music & PagQ 
v--e ----- 
Administration & SMDR & *MODEM 
-------_____ 
*DISA 
-f Disk File Management 1 
4DSHS Management1 {Addnional Function 
{Caller ID 
System Data Save 
f System Data Load 
*Test 
f *DTMF G/R Test 
---w-w---...

Intial Screen 
The screen below is displayed when you start the DSHS program. 
Main Menu Off-line KX-TD1232 Both 
Panasonic 
Digital Super Nybrid System 
Operating & Maintenance Tool Ver 2.xX 
(C) COPYRIGHT 1993 KYUSHU MATSUSHITA ELECTRIC CO., LTD. 
1. System Data Programming (Batch) 
2. System Data Programming (Interactive) 
3. Disk Pile Management 
4. DSHS Management 
5. DSHS Connect / Disconnect 
6. Quit 
Select the number :[J 
Enter the number, and hit ENTER key 
@j 
@j 
m HELP &j @j fj 
p.j 
. 
-...

[S ] DSHS Connect / Disconnect 
Connects the PC terminal with the DSHS by RS-232C or MODEM and disconnects from the DSHS. 
[6] Quit 
Returns to MS-DOS System. 
 
(1) Enter the number of the program, and press ENTER key. 
(2) When you select “1. System Data Programming (Batch)“, you must choose “3. Disk File Manage- 
ment” or “4. DSHS Management” first to load or save the system data into PC DB . 
(3) When you select “2. System Data Programming (Interactive)” or “4. DSHS Management”, you must 
choose “5....

ain enu 
The screen below appears first when you select “1. System Data Programming (Batch)“. 
System Data Programming Main Menu Off-line 
. KX-TD1232 Both 
1. Line 
2. Station 
3. System 
4. Toll Restriction 
5. ARS 
6. Aux. Ports ’ 
7. Additional Function 
8. Caller ID 
Select the number : [J 
Enter the number, and hit ENTER key 
 
(1) 
Enter the number of the program, and press ENTER key. 
(2) Press F8 (EXIT) to return to the initial screen. 
4-1  

4-2 Line 
The screen illustrated below appears when you select “1. Line”. 
Line Menu 
Off-line KX-TD1232 Both 
1. CO Line Setting 
2. CO Line Groups (TRG) 
Select the number : [-I 
Enter the number, and hit ENTER key 
fjYj @ 
gj fi HELP m 
@ B 
II3 EXIT 
 . 
(1) 
Enter the number of the program, and press ENTER key. 
(2) Press F8 (EXIT) to return to Main Menu screen. 
4-2  

1. CO Line Setting 
i 
CO Line Setting 
Off-line KX-TD816 
COC T D D P C 
CPC DIL 1 : 1 Reverse 
No. 0 R I T P I Detection EXT No. Circuit 
N G A M S D Mode out 
Day Night 
L F 
01 [ll D 80 10 N 
02 N [2] P 160 20 N 
03 Y’ [3] D 80 10 N 
04 Y [4] P 80 10 N 
05 Y [5] P 80 10 N 
c., -7 r,3 - n-. -r -. 
;;7” ; ~~; ~ ;;;; ;;; ~ 
08 Y [SJ P 80 10 N Disable Disable 
1OOms Enable 
2OOms Enable 
3OOms Enable 
4OOms Enable 
-em 
3UUlIl~ EIIcliJiL 
6OOms Enable 
400ms Enable EXlJ109] EX’ljW] Reverse 
Disable...

[7] CPC Detection Mode (CPC Signal Dctcction Incoming Set) [4051 
Sets the CPC signal dctcction time when cithcr calling or called party goes on hook. 
[S] CPC Detection Out (CPC Signal Dctcction Outgoing Set) 
r4151 
Assigns to enable or disable to dclcct the CPC signal while calling . 
[9] DIL 1 : 1 EXT No. Day /Night 
(Direct In Line Extension -Day /Night) [407,408 ] 
Assigns an extension for a DIL 1: 1 destination during day time or night time. 
[lo] Reverse Circuit (Reverse Circuit Assignment)...

TABLE of ITEMS 
Assigning 
Items Type of Field Sclcction of paramctcr Default 
CON Selecting 
Y : 
COMCCL or N : Disconnect Y 
coOl=l, cm2=2 
co03=3. coo4=4 
TRG Direct 1 through 8 1 digit coos=s, coobd 
. 
COOM. COO8=8 
----- 
COO9=8through 
CO24=8 (KX-TD1232 
D : DTMF, P : Pulse. C : Call Block 
Y : Identify or N: Not identify ’ 
CPC 
Detection 
diode Selecting Disable, lOOms, 2OOms. 3OOms, 4OOms. 5OOms, 6OOms 400ms 
CPC 
Detection 
3ut Selecting Disable or Enable Disable 
DlLl : 1 
Xl- No. 
Day /Night...