Panasonic Kx-a271 Eia/Remote Programming And Diagnosis Manual

MODEL NO. 
lease read this manual before using the  

oreword 
This manual describes how to use the KX-A271 software package which is used to assist in programming the 
Digital Super Hybrid Systems (abbreviated to “DSHS” in this manual) KX-TD1232 and KX-TD8 16. The KX- 
A271 enables you to confirm, change, load and save the System Data. It can also diagnose DSHS lines and 
cards, and edit files in a floppy disk (FD) or a hard disk (HD) in which the System Data is stored. 
For 
-7D1232, this version is applicable to ROM version PO1 IJ and ROM versions from...

ter 
er 
2-1 
2-2 
2-3 
2-4 
2-5 
2-6 
2-7 
2-9 
er 
3-1 
ter 
4-1 
4-2 The System ....................................................................................................................... l- 1 
System Configuration ...................................................................................................... l- 1 
ile Configuration ........................................................................................................... 
l- 3 
Starting the System...

4-3 Station . . . ..*................................................................................................................................. 4-8 
1. Station Setting 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 
2. Station Setting 2...

4-6 ARS (Automatic Route Selection) 
. . . . . ..*...*............*..................-. . . . . . . ..f..................... . . . . . . . . . . . . ..f 
4-62 
1. ARS Mode / Time / Modify Data 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..-... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63 
2. 
ARS Routing Plan .___...... . . . . . . . . . . . . . . . . . . . . . . . . . . . .._..........................................-..-..........

4. 
5. 
6. 
7. 
8. 
pter 
8- 
8-2 DISA Test . . . . . . . . . . . .._.............._..._.............................._.......................................................... 6-16 
DPH, RMT, CONF Test . . . . .._.............._..................._............................_..................._......... 6-20 
Caller ID Test . . . . . . . . . . . . . . . . .._.............................................~................................................... 6-24 
SIC Test . . . . . . . . . . . . . . . ....

Chapter 
The System 
The Digital Super Hybrid System (abbreviated to “DSHS” in this manual) works under PC-DOS in IBM- 
PC. The system and data can be stored either in FD or HD. 
1-2 System Configuration 
The configuration of the system is as explained below. 
1. 
2. 
3. Master Computer 
The DSHS works with an IBM-PC XT/AT or compatible personal computers. 
OS 
Version 3.1 or later versions of PC-DOS (MS-DOS) is requited. 
Connection Cable 
To connect the DSHS with an IBM-PC in the EIA mode, use an...

4. Modem 
To connect the DSHS with an IBM-PC from a remote site, use a Hayes compatible modem (AT 
command). The RS-232C straight cable is necessary to connect the DSHS with an external modem. 
(1) The modem which is used to connect with the DSHS must be able to use one of the following 
standards : 
CCITT V.21, CCJTT V.22, Bell 103, Bell 212A. 
(2) The modem must be also able to use the following AT commands to assign the modem from the 
IBM-PC : . 
Z=Reset D=Dial 
E=Echo back H=Lme hook 
V=Result code...

l-3 File Configuration 
The KX-A271 software is provided on a 35 inch FD, 2DD(720K byte) format. It contains the following 
tile : 
E1232A.EXE --Execution file 
You may make the following files if desired. 
*.DBE --Database file of Version 2.xx (for KX-TD1232 of ROM version PO1 1J 
and of ROM versions from PO1 1N) 
*.DBD --Database file of Version 1 .xx 
*.DBA --ASC II file . 
tatiing Ihe System 
(1) Insert the KX-A271 disk into drive A. 
(2) Change the cunznt directory to drive A. 
(3) Enter the...

.,*n--r L. 
.c- - 
This chapter provides you the basic operation which is common to all System Data Program including the layout 
of the screen, function keys, various messages, and the operating flow chart. 
The figure below is a sample screen of CO Line Setting. 
.C.O Liie~Setting -7 - - -(l) Off-l&e- - (2) KX-TD1232 Both 
COCT D D P C CPC DLLl:l 
No. 0 R I T P I Detection EXTNo ---- 
01 
02 
03 
04 
05 
06 
07 
08 
09 
10 
11 
12 N G A M S D Mode 
L F Night 
[l] D 80 10 N Disable Disable 
EXTWW...